Warning: Permanently added '10.128.0.31' (ED25519) to the list of known hosts.
2024/04/16 17:05:32 ignoring optional flag "sandboxArg"="0"
2024/04/16 17:05:32 parsed 1 programs
[   54.214338][ T5005] cgroup: Unknown subsys name 'net'
[   54.394628][ T5005] cgroup: Unknown subsys name 'rlimit'
2024/04/16 17:05:32 executed programs: 0
[   54.542559][ T5004] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=5004 'syz-execprog'
[   54.781735][ T5029] Bluetooth: hci0: unexpected cc 0x0c03 length: 249 > 1
[   54.789820][ T5029] Bluetooth: hci1: unexpected cc 0x0c03 length: 249 > 1
[   54.797623][ T5029] Bluetooth: hci2: unexpected cc 0x0c03 length: 249 > 1
[   54.828264][ T5043] Bluetooth: hci0: unexpected cc 0x1003 length: 249 > 9
[   54.836344][ T5043] Bluetooth: hci1: unexpected cc 0x1003 length: 249 > 9
[   54.844050][ T5043] Bluetooth: hci2: unexpected cc 0x1003 length: 249 > 9
[   54.850791][ T5044] Bluetooth: hci3: unexpected cc 0x0c03 length: 249 > 1
[   54.851580][ T5043] Bluetooth: hci4: unexpected cc 0x0c03 length: 249 > 1
[   54.866935][ T5044] Bluetooth: hci5: unexpected cc 0x0c03 length: 249 > 1
[   54.875616][ T5044] Bluetooth: hci0: unexpected cc 0x1001 length: 249 > 9
[   54.877213][ T5050] Bluetooth: hci1: unexpected cc 0x1001 length: 249 > 9
[   54.883379][ T5044] Bluetooth: hci2: unexpected cc 0x1001 length: 249 > 9
[   54.890184][ T5050] Bluetooth: hci3: unexpected cc 0x1003 length: 249 > 9
[   54.896965][ T5044] Bluetooth: hci4: unexpected cc 0x1003 length: 249 > 9
[   54.904122][ T5050] Bluetooth: hci6: unexpected cc 0x0c03 length: 249 > 1
[   54.910935][ T5044] Bluetooth: hci7: unexpected cc 0x0c03 length: 249 > 1
[   54.918160][ T5050] Bluetooth: hci5: unexpected cc 0x1003 length: 249 > 9
[   54.925948][ T5044] Bluetooth: hci3: unexpected cc 0x1001 length: 249 > 9
[   54.933020][ T5050] Bluetooth: hci4: unexpected cc 0x1001 length: 249 > 9
[   54.938558][ T5044] Bluetooth: hci6: unexpected cc 0x1003 length: 249 > 9
[   54.946265][ T5050] Bluetooth: hci7: unexpected cc 0x1003 length: 249 > 9
[   54.954346][ T5044] Bluetooth: hci5: unexpected cc 0x1001 length: 249 > 9
[   54.960292][ T5050] Bluetooth: hci0: unexpected cc 0x0c23 length: 249 > 4
[   54.966785][ T5044] Bluetooth: hci2: unexpected cc 0x0c23 length: 249 > 4
[   54.973564][ T5050] Bluetooth: hci6: unexpected cc 0x1001 length: 249 > 9
[   54.981838][ T5044] Bluetooth: hci5: unexpected cc 0x0c23 length: 249 > 4
[   54.988127][ T5050] Bluetooth: hci7: unexpected cc 0x1001 length: 249 > 9
[   54.994814][ T5044] Bluetooth: hci1: unexpected cc 0x0c23 length: 249 > 4
[   55.001590][ T5050] Bluetooth: hci0: unexpected cc 0x0c25 length: 249 > 3
[   55.015614][ T5044] Bluetooth: hci4: unexpected cc 0x0c23 length: 249 > 4
[   55.015786][ T5044] Bluetooth: hci3: unexpected cc 0x0c23 length: 249 > 4
[   55.024254][ T5050] Bluetooth: hci0: unexpected cc 0x0c38 length: 249 > 2
[   55.029736][ T5044] Bluetooth: hci2: unexpected cc 0x0c25 length: 249 > 3
[   55.038019][ T5050] Bluetooth: hci4: unexpected cc 0x0c25 length: 249 > 3
[   55.044010][ T5044] Bluetooth: hci1: unexpected cc 0x0c25 length: 249 > 3
[   55.050737][ T5050] Bluetooth: hci5: unexpected cc 0x0c25 length: 249 > 3
[   55.058260][ T5044] Bluetooth: hci7: unexpected cc 0x0c23 length: 249 > 4
[   55.065001][ T5050] Bluetooth: hci2: unexpected cc 0x0c38 length: 249 > 2
[   55.071357][ T5044] Bluetooth: hci4: unexpected cc 0x0c38 length: 249 > 2
[   55.078336][ T5050] Bluetooth: hci6: unexpected cc 0x0c23 length: 249 > 4
[   55.085686][ T4408] Bluetooth: hci1: unexpected cc 0x0c38 length: 249 > 2
[   55.092110][ T5050] Bluetooth: hci3: unexpected cc 0x0c25 length: 249 > 3
[   55.106610][ T5052] Bluetooth: hci5: unexpected cc 0x0c38 length: 249 > 2
[   55.108515][ T5050] Bluetooth: hci3: unexpected cc 0x0c38 length: 249 > 2
[   55.121607][ T5044] Bluetooth: hci7: unexpected cc 0x0c25 length: 249 > 3
[   55.125465][ T5034] Bluetooth: hci6: unexpected cc 0x0c25 length: 249 > 3
[   55.136025][ T5052] Bluetooth: hci7: unexpected cc 0x0c38 length: 249 > 2
[   55.148356][   T48] Bluetooth: hci6: unexpected cc 0x0c38 length: 249 > 2
[   55.720095][ T5035] chnl_net:caif_netlink_parms(): no params data found
[   55.858381][ T5028] chnl_net:caif_netlink_parms(): no params data found
[   55.869697][ T5046] chnl_net:caif_netlink_parms(): no params data found
[   55.880247][ T5027] chnl_net:caif_netlink_parms(): no params data found
[   55.888948][ T5026] chnl_net:caif_netlink_parms(): no params data found
[   55.920974][ T5045] chnl_net:caif_netlink_parms(): no params data found
[   55.978691][ T5041] chnl_net:caif_netlink_parms(): no params data found
[   56.124461][ T5035] bridge0: port 1(bridge_slave_0) entered blocking state
[   56.131573][ T5035] bridge0: port 1(bridge_slave_0) entered disabled state
[   56.139941][ T5035] bridge_slave_0: entered allmulticast mode
[   56.147309][ T5035] bridge_slave_0: entered promiscuous mode
[   56.158945][ T5035] bridge0: port 2(bridge_slave_1) entered blocking state
[   56.170459][ T5035] bridge0: port 2(bridge_slave_1) entered disabled state
[   56.177699][ T5035] bridge_slave_1: entered allmulticast mode
[   56.188341][ T5035] bridge_slave_1: entered promiscuous mode
[   56.200181][ T5037] chnl_net:caif_netlink_parms(): no params data found
[   56.278684][ T5035] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   56.307420][ T5027] bridge0: port 1(bridge_slave_0) entered blocking state
[   56.316919][ T5027] bridge0: port 1(bridge_slave_0) entered disabled state
[   56.326650][ T5027] bridge_slave_0: entered allmulticast mode
[   56.333410][ T5027] bridge_slave_0: entered promiscuous mode
[   56.367145][ T5035] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   56.392475][ T5027] bridge0: port 2(bridge_slave_1) entered blocking state
[   56.399706][ T5027] bridge0: port 2(bridge_slave_1) entered disabled state
[   56.406958][ T5027] bridge_slave_1: entered allmulticast mode
[   56.414018][ T5027] bridge_slave_1: entered promiscuous mode
[   56.431144][ T5028] bridge0: port 1(bridge_slave_0) entered blocking state
[   56.443243][ T5028] bridge0: port 1(bridge_slave_0) entered disabled state
[   56.450405][ T5028] bridge_slave_0: entered allmulticast mode
[   56.457199][ T5028] bridge_slave_0: entered promiscuous mode
[   56.491685][ T5046] bridge0: port 1(bridge_slave_0) entered blocking state
[   56.499056][ T5046] bridge0: port 1(bridge_slave_0) entered disabled state
[   56.506439][ T5046] bridge_slave_0: entered allmulticast mode
[   56.513188][ T5046] bridge_slave_0: entered promiscuous mode
[   56.520389][ T5026] bridge0: port 1(bridge_slave_0) entered blocking state
[   56.527728][ T5026] bridge0: port 1(bridge_slave_0) entered disabled state
[   56.535174][ T5026] bridge_slave_0: entered allmulticast mode
[   56.541755][ T5026] bridge_slave_0: entered promiscuous mode
[   56.564865][ T5028] bridge0: port 2(bridge_slave_1) entered blocking state
[   56.571923][ T5028] bridge0: port 2(bridge_slave_1) entered disabled state
[   56.579418][ T5028] bridge_slave_1: entered allmulticast mode
[   56.586005][ T5028] bridge_slave_1: entered promiscuous mode
[   56.597519][ T5045] bridge0: port 1(bridge_slave_0) entered blocking state
[   56.605457][ T5045] bridge0: port 1(bridge_slave_0) entered disabled state
[   56.612571][ T5045] bridge_slave_0: entered allmulticast mode
[   56.619560][ T5045] bridge_slave_0: entered promiscuous mode
[   56.635164][ T5046] bridge0: port 2(bridge_slave_1) entered blocking state
[   56.642262][ T5046] bridge0: port 2(bridge_slave_1) entered disabled state
[   56.649950][ T5046] bridge_slave_1: entered allmulticast mode
[   56.656669][ T5046] bridge_slave_1: entered promiscuous mode
[   56.663663][ T5026] bridge0: port 2(bridge_slave_1) entered blocking state
[   56.670763][ T5026] bridge0: port 2(bridge_slave_1) entered disabled state
[   56.678079][ T5026] bridge_slave_1: entered allmulticast mode
[   56.685470][ T5026] bridge_slave_1: entered promiscuous mode
[   56.716942][ T5045] bridge0: port 2(bridge_slave_1) entered blocking state
[   56.724334][ T5045] bridge0: port 2(bridge_slave_1) entered disabled state
[   56.731516][ T5045] bridge_slave_1: entered allmulticast mode
[   56.738305][ T5045] bridge_slave_1: entered promiscuous mode
[   56.749072][ T5035] team0: Port device team_slave_0 added
[   56.761276][ T5041] bridge0: port 1(bridge_slave_0) entered blocking state
[   56.768616][ T5041] bridge0: port 1(bridge_slave_0) entered disabled state
[   56.775863][ T5041] bridge_slave_0: entered allmulticast mode
[   56.782381][ T5041] bridge_slave_0: entered promiscuous mode
[   56.791643][ T5027] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   56.841320][ T5035] team0: Port device team_slave_1 added
[   56.855930][ T5041] bridge0: port 2(bridge_slave_1) entered blocking state
[   56.864492][ T5041] bridge0: port 2(bridge_slave_1) entered disabled state
[   56.871616][ T5041] bridge_slave_1: entered allmulticast mode
[   56.878410][ T5041] bridge_slave_1: entered promiscuous mode
[   56.886869][ T5027] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   56.911904][ T5028] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   56.938579][ T5046] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   56.958983][ T5026] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   56.977438][ T5037] bridge0: port 1(bridge_slave_0) entered blocking state
[   56.989351][ T5037] bridge0: port 1(bridge_slave_0) entered disabled state
[   56.996662][ T5037] bridge_slave_0: entered allmulticast mode
[   57.003374][ T5037] bridge_slave_0: entered promiscuous mode
[   57.010956][ T5028] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   57.040771][ T5045] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   57.051482][ T5046] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   57.078407][ T5026] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   57.088763][ T5037] bridge0: port 2(bridge_slave_1) entered blocking state
[   57.096118][ T5037] bridge0: port 2(bridge_slave_1) entered disabled state
[   57.103642][ T5037] bridge_slave_1: entered allmulticast mode
[   57.110176][ T5037] bridge_slave_1: entered promiscuous mode
[   57.124560][ T5035] batman_adv: batadv0: Adding interface: batadv_slave_0
[   57.131524][ T5035] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   57.157687][ T5035] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   57.169148][ T5050] Bluetooth: hci7: command 0x0409 tx timeout
[   57.175516][ T5050] Bluetooth: hci0: command 0x0409 tx timeout
[   57.179756][ T5045] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   57.181705][ T5050] Bluetooth: hci1: command 0x0409 tx timeout
[   57.197182][ T5040] Bluetooth: hci2: command 0x0409 tx timeout
[   57.208982][ T5041] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   57.220655][ T5027] team0: Port device team_slave_0 added
[   57.243091][ T5050] Bluetooth: hci4: command 0x0409 tx timeout
[   57.249434][ T5050] Bluetooth: hci6: command 0x0409 tx timeout
[   57.254876][ T5040] Bluetooth: hci5: command 0x0409 tx timeout
[   57.256497][ T5049] Bluetooth: hci3: command 0x0409 tx timeout
[   57.268904][ T5035] batman_adv: batadv0: Adding interface: batadv_slave_1
[   57.275945][ T5035] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   57.301977][ T5035] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   57.334198][ T5041] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   57.345541][ T5027] team0: Port device team_slave_1 added
[   57.369056][ T5028] team0: Port device team_slave_0 added
[   57.387501][ T5046] team0: Port device team_slave_0 added
[   57.411833][ T5026] team0: Port device team_slave_0 added
[   57.419782][ T5037] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   57.431286][ T5028] team0: Port device team_slave_1 added
[   57.445957][ T5045] team0: Port device team_slave_0 added
[   57.453278][ T5046] team0: Port device team_slave_1 added
[   57.476302][ T5026] team0: Port device team_slave_1 added
[   57.483537][ T5037] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   57.509709][ T5045] team0: Port device team_slave_1 added
[   57.528336][ T5041] team0: Port device team_slave_0 added
[   57.534850][ T5027] batman_adv: batadv0: Adding interface: batadv_slave_0
[   57.541802][ T5027] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   57.567777][ T5027] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   57.627618][ T5041] team0: Port device team_slave_1 added
[   57.640005][ T5027] batman_adv: batadv0: Adding interface: batadv_slave_1
[   57.647571][ T5027] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   57.673930][ T5027] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   57.703747][ T5028] batman_adv: batadv0: Adding interface: batadv_slave_0
[   57.710723][ T5028] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   57.737169][ T5028] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   57.751494][ T5035] hsr_slave_0: entered promiscuous mode
[   57.758519][ T5035] hsr_slave_1: entered promiscuous mode
[   57.775444][ T5046] batman_adv: batadv0: Adding interface: batadv_slave_0
[   57.782401][ T5046] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   57.808505][ T5046] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   57.844968][ T5026] batman_adv: batadv0: Adding interface: batadv_slave_0
[   57.851949][ T5026] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   57.878228][ T5026] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   57.893452][ T5037] team0: Port device team_slave_0 added
[   57.911105][ T5028] batman_adv: batadv0: Adding interface: batadv_slave_1
[   57.918222][ T5028] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   57.944640][ T5028] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   57.960403][ T5045] batman_adv: batadv0: Adding interface: batadv_slave_0
[   57.967621][ T5045] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   57.994193][ T5045] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   58.006304][ T5046] batman_adv: batadv0: Adding interface: batadv_slave_1
[   58.013415][ T5046] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   58.039704][ T5046] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   58.063369][ T5041] batman_adv: batadv0: Adding interface: batadv_slave_0
[   58.070337][ T5041] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   58.096863][ T5041] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   58.109088][ T5026] batman_adv: batadv0: Adding interface: batadv_slave_1
[   58.117542][ T5026] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   58.144044][ T5026] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   58.156186][ T5037] team0: Port device team_slave_1 added
[   58.176660][ T5045] batman_adv: batadv0: Adding interface: batadv_slave_1
[   58.183867][ T5045] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   58.210610][ T5045] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   58.241040][ T5041] batman_adv: batadv0: Adding interface: batadv_slave_1
[   58.248441][ T5041] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   58.274853][ T5041] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   58.342199][ T5027] hsr_slave_0: entered promiscuous mode
[   58.348468][ T5027] hsr_slave_1: entered promiscuous mode
[   58.358054][ T5027] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   58.366035][ T5027] Cannot create hsr debugfs directory
[   58.437613][ T5037] batman_adv: batadv0: Adding interface: batadv_slave_0
[   58.445063][ T5037] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   58.471220][ T5037] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   58.486783][ T5028] hsr_slave_0: entered promiscuous mode
[   58.492943][ T5028] hsr_slave_1: entered promiscuous mode
[   58.499339][ T5028] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   58.506964][ T5028] Cannot create hsr debugfs directory
[   58.542618][ T5026] hsr_slave_0: entered promiscuous mode
[   58.549281][ T5026] hsr_slave_1: entered promiscuous mode
[   58.556181][ T5026] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   58.564208][ T5026] Cannot create hsr debugfs directory
[   58.578048][ T5037] batman_adv: batadv0: Adding interface: batadv_slave_1
[   58.585337][ T5037] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   58.611765][ T5037] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   58.642691][ T5046] hsr_slave_0: entered promiscuous mode
[   58.649043][ T5046] hsr_slave_1: entered promiscuous mode
[   58.659886][ T5046] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   58.667709][ T5046] Cannot create hsr debugfs directory
[   58.728506][ T5045] hsr_slave_0: entered promiscuous mode
[   58.735184][ T5045] hsr_slave_1: entered promiscuous mode
[   58.741496][ T5045] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   58.753153][ T5045] Cannot create hsr debugfs directory
[   58.765863][ T5041] hsr_slave_0: entered promiscuous mode
[   58.772503][ T5041] hsr_slave_1: entered promiscuous mode
[   58.778535][ T5041] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   58.791172][ T5041] Cannot create hsr debugfs directory
[   58.860202][ T5037] hsr_slave_0: entered promiscuous mode
[   58.866677][ T5037] hsr_slave_1: entered promiscuous mode
[   58.872576][ T5037] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   58.880255][ T5037] Cannot create hsr debugfs directory
[   59.243190][ T5049] Bluetooth: hci1: command 0x041b tx timeout
[   59.243826][ T5043] Bluetooth: hci2: command 0x041b tx timeout
[   59.249219][ T5049] Bluetooth: hci0: command 0x041b tx timeout
[   59.262061][ T5050] Bluetooth: hci7: command 0x041b tx timeout
[   59.323241][ T5049] Bluetooth: hci3: command 0x041b tx timeout
[   59.329297][ T5049] Bluetooth: hci4: command 0x041b tx timeout
[   59.335705][ T5050] Bluetooth: hci6: command 0x041b tx timeout
[   59.335725][ T5043] Bluetooth: hci5: command 0x041b tx timeout
[   59.354907][ T5035] netdevsim netdevsim3 netdevsim0: renamed from eth0
[   59.367958][ T5035] netdevsim netdevsim3 netdevsim1: renamed from eth1
[   59.399795][ T5035] netdevsim netdevsim3 netdevsim2: renamed from eth2
[   59.417802][ T5035] netdevsim netdevsim3 netdevsim3: renamed from eth3
[   59.470273][ T5027] netdevsim netdevsim6 netdevsim0: renamed from eth0
[   59.480182][ T5027] netdevsim netdevsim6 netdevsim1: renamed from eth1
[   59.491797][ T5027] netdevsim netdevsim6 netdevsim2: renamed from eth2
[   59.514768][ T5027] netdevsim netdevsim6 netdevsim3: renamed from eth3
[   59.574287][ T5046] netdevsim netdevsim4 netdevsim0: renamed from eth0
[   59.601391][ T5046] netdevsim netdevsim4 netdevsim1: renamed from eth1
[   59.612586][ T5046] netdevsim netdevsim4 netdevsim2: renamed from eth2
[   59.639468][ T5046] netdevsim netdevsim4 netdevsim3: renamed from eth3
[   59.673332][ T5028] netdevsim netdevsim1 netdevsim0: renamed from eth0
[   59.700990][ T5028] netdevsim netdevsim1 netdevsim1: renamed from eth1
[   59.715766][ T5028] netdevsim netdevsim1 netdevsim2: renamed from eth2
[   59.728638][ T5028] netdevsim netdevsim1 netdevsim3: renamed from eth3
[   59.764815][ T5027] 8021q: adding VLAN 0 to HW filter on device bond0
[   59.827758][ T5035] 8021q: adding VLAN 0 to HW filter on device bond0
[   59.843573][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   59.852066][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   59.864760][ T5027] 8021q: adding VLAN 0 to HW filter on device team0
[   59.909708][ T5035] 8021q: adding VLAN 0 to HW filter on device team0
[   59.944043][    T9] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   59.952582][    T9] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   59.963110][    T9] bridge0: port 1(bridge_slave_0) entered blocking state
[   59.970467][    T9] bridge0: port 1(bridge_slave_0) entered forwarding state
[   59.979051][    T9] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   59.987053][    T9] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   59.995462][    T9] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   60.004616][    T9] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   60.013047][    T9] bridge0: port 2(bridge_slave_1) entered blocking state
[   60.020121][    T9] bridge0: port 2(bridge_slave_1) entered forwarding state
[   60.028601][    T9] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   60.091731][ T5026] netdevsim netdevsim5 netdevsim0: renamed from eth0
[   60.102280][ T5065] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   60.111529][ T5065] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   60.120854][ T5065] bridge0: port 1(bridge_slave_0) entered blocking state
[   60.127966][ T5065] bridge0: port 1(bridge_slave_0) entered forwarding state
[   60.136303][ T5065] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   60.145605][ T5065] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   60.155010][ T5065] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   60.163814][ T5065] bridge0: port 2(bridge_slave_1) entered blocking state
[   60.170913][ T5065] bridge0: port 2(bridge_slave_1) entered forwarding state
[   60.178688][ T5065] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   60.188058][ T5065] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   60.197616][ T5065] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   60.206973][ T5065] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   60.248145][ T5026] netdevsim netdevsim5 netdevsim1: renamed from eth1
[   60.268299][ T5026] netdevsim netdevsim5 netdevsim2: renamed from eth2
[   60.295534][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   60.303842][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   60.311540][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   60.320443][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   60.329489][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   60.338015][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   60.346962][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   60.355928][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   60.364534][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   60.382864][ T5035] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   60.402207][ T5035] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   60.443859][ T5026] netdevsim netdevsim5 netdevsim3: renamed from eth3
[   60.466112][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   60.474534][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   60.484252][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   60.492848][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   60.501266][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   60.510158][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   60.518724][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   60.527019][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   60.537029][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   60.548494][ T5027] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   60.584628][ T5046] 8021q: adding VLAN 0 to HW filter on device bond0
[   60.597554][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   60.663274][ T5045] netdevsim netdevsim0 netdevsim0: renamed from eth0
[   60.694983][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   60.704659][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   60.754577][ T5045] netdevsim netdevsim0 netdevsim1: renamed from eth1
[   60.778064][ T5028] 8021q: adding VLAN 0 to HW filter on device bond0
[   60.816056][ T5046] 8021q: adding VLAN 0 to HW filter on device team0
[   60.853862][ T5045] netdevsim netdevsim0 netdevsim2: renamed from eth2
[   60.881455][ T5045] netdevsim netdevsim0 netdevsim3: renamed from eth3
[   60.900161][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   60.909105][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   60.917848][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   60.926872][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   60.935797][ T5110] bridge0: port 1(bridge_slave_0) entered blocking state
[   60.942933][ T5110] bridge0: port 1(bridge_slave_0) entered forwarding state
[   60.962119][ T5028] 8021q: adding VLAN 0 to HW filter on device team0
[   60.986846][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   61.003786][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   61.012588][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   61.043824][    T7] bridge0: port 2(bridge_slave_1) entered blocking state
[   61.050968][    T7] bridge0: port 2(bridge_slave_1) entered forwarding state
[   61.124580][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   61.138045][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   61.164407][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   61.183871][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   61.192352][ T5110] bridge0: port 1(bridge_slave_0) entered blocking state
[   61.199505][ T5110] bridge0: port 1(bridge_slave_0) entered forwarding state
[   61.217176][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   61.232277][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   61.246149][ T5110] bridge0: port 2(bridge_slave_1) entered blocking state
[   61.253290][ T5110] bridge0: port 2(bridge_slave_1) entered forwarding state
[   61.272150][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   61.281681][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   61.323153][ T5043] Bluetooth: hci0: command 0x040f tx timeout
[   61.329202][ T5043] Bluetooth: hci2: command 0x040f tx timeout
[   61.334192][ T5040] Bluetooth: hci7: command 0x040f tx timeout
[   61.335983][ T5043] Bluetooth: hci1: command 0x040f tx timeout
[   61.351117][ T5041] netdevsim netdevsim7 netdevsim0: renamed from eth0
[   61.372853][ T5041] netdevsim netdevsim7 netdevsim1: renamed from eth1
[   61.390903][ T5026] 8021q: adding VLAN 0 to HW filter on device bond0
[   61.403083][ T5043] Bluetooth: hci4: command 0x040f tx timeout
[   61.403370][ T5049] Bluetooth: hci6: command 0x040f tx timeout
[   61.409095][ T5043] Bluetooth: hci3: command 0x040f tx timeout
[   61.415713][ T5040] Bluetooth: hci5: command 0x040f tx timeout
[   61.431643][ T5035] 8021q: adding VLAN 0 to HW filter on device batadv0
[   61.451291][    T9] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   61.464799][    T9] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   61.484665][    T9] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   61.503670][    T9] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   61.515151][    T9] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   61.531345][    T9] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   61.543111][    T9] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   61.551784][    T9] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   61.571500][    T9] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   61.581667][    T9] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   61.591041][    T9] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   61.600440][    T9] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   61.608570][    T9] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   61.616681][    T9] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   61.625388][    T9] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   61.635357][    T9] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   61.645068][    T9] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   61.668620][ T5028] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   61.693863][ T5028] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   61.711618][ T5041] netdevsim netdevsim7 netdevsim2: renamed from eth2
[   61.725134][ T5027] 8021q: adding VLAN 0 to HW filter on device batadv0
[   61.742393][ T5026] 8021q: adding VLAN 0 to HW filter on device team0
[   61.810761][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   61.819708][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   61.837942][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   61.850429][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   61.870351][ T5041] netdevsim netdevsim7 netdevsim3: renamed from eth3
[   61.927734][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   61.958946][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   61.983995][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   62.001810][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   62.010991][    T7] bridge0: port 1(bridge_slave_0) entered blocking state
[   62.018151][    T7] bridge0: port 1(bridge_slave_0) entered forwarding state
[   62.051819][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   62.074368][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   62.097825][ T5046] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   62.121860][ T5046] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   62.184889][ T5037] netdevsim netdevsim2 netdevsim0: renamed from eth0
[   62.195403][ T5037] netdevsim netdevsim2 netdevsim1: renamed from eth1
[   62.205437][ T5037] netdevsim netdevsim2 netdevsim2: renamed from eth2
[   62.225027][ T5108] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   62.233430][ T5108] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   62.241952][ T5108] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   62.251121][ T5108] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   62.260498][ T5108] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   62.269789][ T5108] bridge0: port 2(bridge_slave_1) entered blocking state
[   62.276991][ T5108] bridge0: port 2(bridge_slave_1) entered forwarding state
[   62.295621][ T5108] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   62.349688][ T5035] veth0_vlan: entered promiscuous mode
[   62.373813][ T5037] netdevsim netdevsim2 netdevsim3: renamed from eth3
[   62.407684][ T5028] 8021q: adding VLAN 0 to HW filter on device batadv0
[   62.424812][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   62.441954][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   62.461338][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   62.471042][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   62.478957][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   62.489115][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   62.497216][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   62.530103][ T5035] veth1_vlan: entered promiscuous mode
[   62.562222][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   62.570702][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   62.590024][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   62.602617][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   62.620992][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   62.631124][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   62.640438][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   62.693700][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   62.702269][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   62.710634][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   62.719343][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   62.728179][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   62.737055][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   62.745933][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   62.754685][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   62.783241][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   62.791453][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   62.801141][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   62.809959][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   62.837039][ T5035] veth0_macvtap: entered promiscuous mode
[   62.859025][ T5035] veth1_macvtap: entered promiscuous mode
[   62.867710][ T5026] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   62.877532][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   62.887103][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   62.899630][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   62.911545][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   62.926474][ T5045] 8021q: adding VLAN 0 to HW filter on device bond0
[   62.938482][ T5028] veth0_vlan: entered promiscuous mode
[   62.949814][ T5027] veth0_vlan: entered promiscuous mode
[   62.963999][ T5035] batman_adv: batadv0: Interface activated: batadv_slave_0
[   62.992306][ T5041] 8021q: adding VLAN 0 to HW filter on device bond0
[   63.006763][ T5046] 8021q: adding VLAN 0 to HW filter on device batadv0
[   63.019078][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   63.037378][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   63.063267][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   63.072454][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   63.104009][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   63.112830][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   63.131166][ T5028] veth1_vlan: entered promiscuous mode
[   63.163338][ T5027] veth1_vlan: entered promiscuous mode
[   63.174029][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   63.184466][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   63.192409][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   63.223800][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   63.231953][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   63.253718][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   63.277083][ T5035] batman_adv: batadv0: Interface activated: batadv_slave_1
[   63.304582][ T5041] 8021q: adding VLAN 0 to HW filter on device team0
[   63.319442][ T5045] 8021q: adding VLAN 0 to HW filter on device team0
[   63.338408][  T758] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   63.346780][  T758] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   63.355815][  T758] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   63.365545][  T758] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   63.373408][  T758] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   63.397292][ T5035] netdevsim netdevsim3 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   63.406801][ T5043] Bluetooth: hci7: command 0x0419 tx timeout
[   63.406820][ T5049] Bluetooth: hci2: command 0x0419 tx timeout
[   63.412838][ T5043] Bluetooth: hci0: command 0x0419 tx timeout
[   63.419039][ T5040] Bluetooth: hci1: command 0x0419 tx timeout
[   63.434521][ T5035] netdevsim netdevsim3 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   63.445362][ T5035] netdevsim netdevsim3 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   63.454516][ T5035] netdevsim netdevsim3 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   63.483713][ T5049] Bluetooth: hci5: command 0x0419 tx timeout
[   63.483740][ T5043] Bluetooth: hci6: command 0x0419 tx timeout
[   63.489762][ T5049] Bluetooth: hci4: command 0x0419 tx timeout
[   63.496352][ T5043] Bluetooth: hci3: command 0x0419 tx timeout
[   63.528602][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   63.543226][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   63.550768][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   63.561061][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   63.571723][    T7] bridge0: port 1(bridge_slave_0) entered blocking state
[   63.578859][    T7] bridge0: port 1(bridge_slave_0) entered forwarding state
[   63.587305][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   63.596226][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   63.605574][    T7] bridge0: port 2(bridge_slave_1) entered blocking state
[   63.612637][    T7] bridge0: port 2(bridge_slave_1) entered forwarding state
[   63.621356][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   63.629979][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   63.638884][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   63.647951][    T7] bridge0: port 1(bridge_slave_0) entered blocking state
[   63.655079][    T7] bridge0: port 1(bridge_slave_0) entered forwarding state
[   63.662915][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   63.671451][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   63.679999][    T7] bridge0: port 2(bridge_slave_1) entered blocking state
[   63.687114][    T7] bridge0: port 2(bridge_slave_1) entered forwarding state
[   63.695289][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   63.704376][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   63.712763][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   63.725007][ T5026] 8021q: adding VLAN 0 to HW filter on device batadv0
[   63.766081][ T5028] veth0_macvtap: entered promiscuous mode
[   63.790297][ T5037] 8021q: adding VLAN 0 to HW filter on device bond0
[   63.801232][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   63.822345][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   63.831092][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   63.839542][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   63.848949][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   63.857827][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   63.867393][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   63.876183][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   63.886174][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   63.894905][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   63.903588][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   63.922635][ T5041] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   63.939463][ T5041] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   63.966696][ T5028] veth1_macvtap: entered promiscuous mode
[   63.990084][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   64.008354][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   64.022508][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   64.035412][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   64.052508][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   64.062554][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   64.074739][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   64.083672][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   64.092026][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   64.100492][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   64.109465][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   64.139283][ T5027] veth0_macvtap: entered promiscuous mode
[   64.150805][ T5027] veth1_macvtap: entered promiscuous mode
[   64.167396][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   64.176273][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   64.184814][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   64.192690][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   64.202194][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   64.211120][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   64.219198][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   64.227375][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   64.236157][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   64.286424][ T5037] 8021q: adding VLAN 0 to HW filter on device team0
[   64.331749][ T5121] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   64.343773][ T5121] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   64.362409][ T5121] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   64.379561][ T5121] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   64.391050][ T5121] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   64.404194][ T5121] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   64.416811][ T5027] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   64.428762][ T5027] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   64.448118][ T5027] batman_adv: batadv0: Interface activated: batadv_slave_0
[   64.475029][   T46] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   64.478130][ T5046] veth0_vlan: entered promiscuous mode
[   64.488505][   T46] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   64.505286][ T5028] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   64.527662][ T5028] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   64.539503][ T5028] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   64.551565][ T5028] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   64.572059][ T5028] batman_adv: batadv0: Interface activated: batadv_slave_0
[   64.581863][ T5065] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   64.591147][ T5065] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   64.600687][ T5065] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   64.609355][ T5065] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   64.618437][ T5065] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   64.627379][ T5065] bridge0: port 1(bridge_slave_0) entered blocking state
[   64.634479][ T5065] bridge0: port 1(bridge_slave_0) entered forwarding state
[   64.642148][ T5065] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   64.650836][ T5065] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   64.659948][ T5065] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   64.668906][ T5065] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   64.680023][ T5027] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   64.691817][ T5027] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   64.704415][ T5027] batman_adv: batadv0: Interface activated: batadv_slave_1
[   64.732045][ T5028] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   64.745729][ T5028] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   64.756002][ T5028] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   64.766749][ T5028] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   64.777623][ T5028] batman_adv: batadv0: Interface activated: batadv_slave_1
[   64.791728][ T5028] netdevsim netdevsim1 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   64.801031][ T5028] netdevsim netdevsim1 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   64.810113][ T5028] netdevsim netdevsim1 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   64.819300][ T5028] netdevsim netdevsim1 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   64.830329][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   64.841053][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   64.874321][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   64.883324][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   64.892079][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   64.900854][ T5006] bridge0: port 2(bridge_slave_1) entered blocking state
[   64.908087][ T5006] bridge0: port 2(bridge_slave_1) entered forwarding state
[   64.916347][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   64.925509][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   64.934435][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   64.942970][ T5006] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   64.956360][ T5046] veth1_vlan: entered promiscuous mode
[   64.994832][ T5027] netdevsim netdevsim6 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   65.005577][ T5027] netdevsim netdevsim6 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   65.015251][ T5027] netdevsim netdevsim6 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   65.024409][ T5027] netdevsim netdevsim6 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   65.055777][   T26] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   65.065421][   T26] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   65.074576][   T26] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   65.083869][   T26] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   65.094953][ T5026] veth0_vlan: entered promiscuous mode
[   65.155426][ T5078] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   65.173900][ T5114] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   65.180808][ T5078] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   65.181826][ T5114] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   65.202499][ T5114] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   65.211138][ T5114] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   65.219211][ T5114] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   65.227141][ T5114] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   65.234971][ T5114] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   65.244039][ T5114] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   65.252619][ T5114] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   65.261343][ T5114] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   65.269668][ T5114] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   65.278046][ T5114] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   65.290077][ T5026] veth1_vlan: entered promiscuous mode
[   65.318312][ T5041] 8021q: adding VLAN 0 to HW filter on device batadv0
[   65.331756][ T5046] veth0_macvtap: entered promiscuous mode
[   65.344117][ T5037] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   65.356169][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   65.374169][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   65.382812][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   65.461343][ T5046] veth1_macvtap: entered promiscuous mode
[   65.480806][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   65.490253][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   65.499127][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   65.508184][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   65.516040][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   65.545020][ T5026] veth0_macvtap: entered promiscuous mode
[   65.584034][ T5045] 8021q: adding VLAN 0 to HW filter on device batadv0
[   65.599856][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   65.625199][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   65.697898][ T5026] veth1_macvtap: entered promiscuous mode
[   65.724229][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   65.732491][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   65.763605][ T5078] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   65.771583][ T5078] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   65.812606][ T5046] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   65.834467][ T5046] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   65.844848][ T5046] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   65.864036][ T5046] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   65.874382][ T5046] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   65.885312][ T5046] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   65.897078][ T5046] batman_adv: batadv0: Interface activated: batadv_slave_0
[   65.914406][ T5166] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   65.922411][ T5166] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   65.931415][ T5166] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   65.956858][   T10] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   65.986025][ T5046] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   65.986438][   T10] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   66.001713][ T5046] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   66.005815][ T5167] usb 4-1: new high-speed USB device number 2 using dummy_hcd
[   66.034307][ T5046] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   66.056743][ T5046] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   66.071720][ T5046] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   66.083368][ T5046] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   66.095653][ T5046] batman_adv: batadv0: Interface activated: batadv_slave_1
[   66.116761][ T5026] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   66.130879][ T5026] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   66.143856][ T5026] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   66.155100][ T5026] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   66.165403][ T5026] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   66.176496][ T5026] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   66.187016][ T5026] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   66.197903][ T5026] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   66.212429][ T5026] batman_adv: batadv0: Interface activated: batadv_slave_0
[   66.227476][ T5116] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   66.235716][ T5116] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   66.244690][ T5116] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   66.259361][ T5116] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   66.268617][ T5116] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   66.277049][ T5167] usb 4-1: Using ep0 maxpacket: 8
[   66.283580][ T5116] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   66.292128][ T5116] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   66.304707][ T5046] netdevsim netdevsim4 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   66.314425][ T5046] netdevsim netdevsim4 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   66.327658][ T5046] netdevsim netdevsim4 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   66.336694][ T5046] netdevsim netdevsim4 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   66.367490][   T10] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   66.374492][ T5026] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   66.376322][   T10] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   66.394192][ T5167] usb 4-1: config 16 interface 0 altsetting 0 endpoint 0x5 has invalid maxpacket 56832, setting to 1024
[   66.401549][ T5026] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   66.406162][ T5167] usb 4-1: config 16 interface 0 altsetting 0 bulk endpoint 0x5 has invalid maxpacket 1024
[   66.426208][ T5026] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   66.427663][ T5167] usb 4-1: config 16 interface 0 altsetting 0 bulk endpoint 0x8B has invalid maxpacket 255
[   66.447919][ T5167] usb 4-1: config 16 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 3
[   66.454072][ T5026] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   66.465643][ T5167] usb 4-1: New USB device found, idVendor=ea8d, idProduct=db1a, bcdDevice=61.23
[   66.480317][ T5167] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   66.489946][ T5026] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   66.507677][ T5026] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   66.519518][ T5026] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   66.539009][ T5026] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   66.551241][ T5026] batman_adv: batadv0: Interface activated: batadv_slave_1
[   66.575947][ T5045] veth0_vlan: entered promiscuous mode
[   66.582157][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   66.590112][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   66.600136][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   66.610334][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   66.619621][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   66.628398][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   66.637085][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   66.648867][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   66.656906][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   66.672794][ T5041] veth0_vlan: entered promiscuous mode
[   66.698854][ T5037] 8021q: adding VLAN 0 to HW filter on device batadv0
[   66.703773][ T5078] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   66.715041][ T5078] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   66.720313][ T5026] netdevsim netdevsim5 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   66.734265][ T5026] netdevsim netdevsim5 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   66.744525][ T5167] usb 4-1: usb_control_msg returned -71
[   66.749453][ T5026] netdevsim netdevsim5 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   66.751989][ T5167] usbtmc 4-1:16.0: can't read capabilities
[   66.759115][ T5026] netdevsim netdevsim5 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   66.798037][ T5045] veth1_vlan: entered promiscuous mode
[   66.805479][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   66.807191][ T5167] usb 4-1: USB disconnect, device number 2
[   66.823440][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   66.832112][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   66.849265][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   66.859523][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   66.920844][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   66.938508][ T5110] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   66.972477][ T5041] veth1_vlan: entered promiscuous mode
[   67.083742][ T5041] veth0_macvtap: entered promiscuous mode
[   67.111638][ T5121] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   67.121125][ T5121] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   67.129629][ T5121] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   67.138455][ T5121] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   67.148531][ T5121] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   67.157774][ T5121] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   67.170683][ T5041] veth1_macvtap: entered promiscuous mode
[   67.191943][ T5078] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   67.198437][ T5045] veth0_macvtap: entered promiscuous mode
[   67.206014][ T5078] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   67.215304][ T5121] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   67.225544][ T5121] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
2024/04/16 17:05:45 executed programs: 8
[   67.236572][ T5121] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   67.247989][ T5031] usb 2-1: new high-speed USB device number 2 using dummy_hcd
[   67.262174][ T5121] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   67.274571][ T5121] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   67.294713][ T5121] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   67.323023][ T5168] usb 7-1: new high-speed USB device number 2 using dummy_hcd
[   67.325943][ T5045] veth1_macvtap: entered promiscuous mode
[   67.382338][ T5041] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   67.399456][ T5041] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   67.410479][ T5041] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   67.421698][ T5041] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   67.432033][ T5041] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   67.442713][ T5041] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   67.452749][ T5041] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   67.465430][ T5041] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   67.475336][ T5041] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   67.491994][ T5041] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   67.503989][ T5041] batman_adv: batadv0: Interface activated: batadv_slave_0
[   67.516742][ T5037] veth0_vlan: entered promiscuous mode
[   67.523018][ T5031] usb 2-1: Using ep0 maxpacket: 8
[   67.550522][  T758] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   67.564059][  T758] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   67.572548][  T758] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   67.583169][ T5168] usb 7-1: Using ep0 maxpacket: 8
[   67.588770][ T5166] usb 4-1: new high-speed USB device number 3 using dummy_hcd
[   67.592700][  T758] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   67.605120][  T758] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   67.620742][ T5045] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   67.632113][ T5045] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   67.643655][ T5045] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   67.654967][ T5045] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   67.665324][ T5045] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   67.676213][ T5045] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   67.687205][ T5031] usb 2-1: config 16 interface 0 altsetting 0 endpoint 0x5 has invalid maxpacket 56832, setting to 1024
[   67.695266][ T5045] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   67.698766][ T5031] usb 2-1: config 16 interface 0 altsetting 0 bulk endpoint 0x5 has invalid maxpacket 1024
[   67.713258][ T5168] usb 7-1: config 16 interface 0 altsetting 0 endpoint 0x5 has invalid maxpacket 56832, setting to 1024
[   67.719551][ T5031] usb 2-1: config 16 interface 0 altsetting 0 bulk endpoint 0x8B has invalid maxpacket 255
[   67.740935][ T5045] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   67.741806][ T5031] usb 2-1: config 16 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 3
[   67.750882][ T5045] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   67.774795][ T5031] usb 2-1: New USB device found, idVendor=ea8d, idProduct=db1a, bcdDevice=61.23
[   67.781793][ T5168] usb 7-1: config 16 interface 0 altsetting 0 bulk endpoint 0x5 has invalid maxpacket 1024
[   67.784078][ T5031] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   67.805186][ T5168] usb 7-1: config 16 interface 0 altsetting 0 bulk endpoint 0x8B has invalid maxpacket 255
[   67.808524][ T5045] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   67.825987][ T5045] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   67.831778][ T5168] usb 7-1: config 16 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 3
[   67.836512][ T5045] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   67.852939][ T5166] usb 4-1: Using ep0 maxpacket: 8
[   67.864099][ T5045] batman_adv: batadv0: Interface activated: batadv_slave_0
[   67.876707][ T5168] usb 7-1: New USB device found, idVendor=ea8d, idProduct=db1a, bcdDevice=61.23
[   67.878137][ T5037] veth1_vlan: entered promiscuous mode
[   67.892450][ T5168] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   67.913398][ T5041] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   67.926348][   T10] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   67.938092][   T10] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   67.944107][ T5041] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   67.955578][ T5041] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   67.967059][ T5041] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   67.977342][ T5041] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   67.988181][ T5041] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   67.998873][ T5166] usb 4-1: config 16 interface 0 altsetting 0 endpoint 0x5 has invalid maxpacket 56832, setting to 1024
[   68.001888][ T5041] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   68.010410][ T5166] usb 4-1: config 16 interface 0 altsetting 0 bulk endpoint 0x5 has invalid maxpacket 1024
[   68.031541][ T5166] usb 4-1: config 16 interface 0 altsetting 0 bulk endpoint 0x8B has invalid maxpacket 255
[   68.041938][ T5041] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   68.041951][ T5041] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   68.054891][ T5166] usb 4-1: config 16 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 3
[   68.076249][ T5166] usb 4-1: New USB device found, idVendor=ea8d, idProduct=db1a, bcdDevice=61.23
[   68.081971][ T5041] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   68.086354][ T5166] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   68.095932][ T5031] usb 2-1: usb_control_msg returned -71
[   68.120772][ T5031] usbtmc 2-1:16.0: can't read capabilities
[   68.130670][ T5041] batman_adv: batadv0: Interface activated: batadv_slave_1
[   68.153756][ T5168] usb 7-1: usb_control_msg returned -71
[   68.159593][ T5168] usbtmc 7-1:16.0: can't read capabilities
[   68.171785][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   68.178729][ T5168] usb 7-1: USB disconnect, device number 2
[   68.197033][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   68.212449][ T5031] usb 2-1: USB disconnect, device number 2
[   68.228468][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   68.252809][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   68.263056][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   68.271669][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   68.286476][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   68.296290][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   68.311644][ T5045] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   68.322266][ T5045] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   68.332149][ T5045] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   68.342641][ T5045] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   68.354531][ T5045] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   68.363489][ T5166] usb 4-1: usb_control_msg returned -71
[   68.365474][ T5045] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   68.370667][ T5166] usbtmc 4-1:16.0: can't read capabilities
[   68.380483][ T5045] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   68.396891][ T5045] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   68.407348][ T5045] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   68.427296][ T5166] usb 4-1: USB disconnect, device number 3
[   68.433757][ T5045] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   68.448467][ T5045] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   68.469058][ T5045] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   68.480347][ T5045] batman_adv: batadv0: Interface activated: batadv_slave_1
[   68.492570][   T10] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   68.497020][ T5045] netdevsim netdevsim0 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   68.510057][ T5045] netdevsim netdevsim0 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   68.519325][   T10] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   68.520263][ T5045] netdevsim netdevsim0 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   68.538970][ T5045] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   68.554565][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   68.564195][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   68.587886][ T5031] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   68.624579][ T5041] netdevsim netdevsim7 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   68.637479][ T5041] netdevsim netdevsim7 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   68.646547][ T5041] netdevsim netdevsim7 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   68.656345][ T5041] netdevsim netdevsim7 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   68.727356][   T10] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   68.758714][   T10] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   68.895457][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   68.918806][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   68.922967][ T5111] usb 2-1: new high-speed USB device number 3 using dummy_hcd
[   68.931025][ T5113] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   68.946847][ T5037] veth0_macvtap: entered promiscuous mode
[   68.995210][ T5037] veth1_macvtap: entered promiscuous mode
[   69.013302][ T5166] usb 7-1: new high-speed USB device number 3 using dummy_hcd
[   69.055098][   T10] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   69.075128][   T10] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   69.108755][   T46] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   69.122497][ T5037] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   69.134928][   T46] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   69.142285][ T5037] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   69.153010][   T22] usb 5-1: new high-speed USB device number 2 using dummy_hcd
[   69.158267][ T5037] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   69.161213][ T5116] usb 4-1: new high-speed USB device number 4 using dummy_hcd
[   69.176118][ T5037] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   69.194797][ T5037] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   69.210150][ T5037] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   69.221739][ T5037] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   69.237120][ T5111] usb 2-1: Using ep0 maxpacket: 8
[   69.242286][ T5037] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   69.253064][ T5166] usb 7-1: Using ep0 maxpacket: 8
[   69.262135][ T5037] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   69.272761][ T5037] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   69.283091][ T5037] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   69.294081][ T5037] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   69.304470][ T5037] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   69.315857][ T5037] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   69.330347][ T5037] batman_adv: batadv0: Interface activated: batadv_slave_0
[   69.339238][ T5199] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   69.347820][ T5199] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   69.356880][ T5199] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   69.365498][ T5199] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   69.373149][ T5166] usb 7-1: config 16 interface 0 altsetting 0 endpoint 0x5 has invalid maxpacket 56832, setting to 1024
[   69.373846][ T5111] usb 2-1: config 16 interface 0 altsetting 0 endpoint 0x5 has invalid maxpacket 56832, setting to 1024
[   69.385527][ T5199] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   69.395808][ T5111] usb 2-1: config 16 interface 0 altsetting 0 bulk endpoint 0x5 has invalid maxpacket 1024
[   69.413048][ T5116] usb 4-1: Using ep0 maxpacket: 8
[   69.414347][    T9] usb 6-1: new high-speed USB device number 2 using dummy_hcd
[   69.418905][   T22] usb 5-1: Using ep0 maxpacket: 8
[   69.426614][ T5111] usb 2-1: config 16 interface 0 altsetting 0 bulk endpoint 0x8B has invalid maxpacket 255
[   69.433748][ T5166] usb 7-1: config 16 interface 0 altsetting 0 bulk endpoint 0x5 has invalid maxpacket 1024
[   69.452390][ T5111] usb 2-1: config 16 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 3
[   69.462567][ T5199] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   69.465892][ T5111] usb 2-1: New USB device found, idVendor=ea8d, idProduct=db1a, bcdDevice=61.23
[   69.482723][ T5166] usb 7-1: config 16 interface 0 altsetting 0 bulk endpoint 0x8B has invalid maxpacket 255
[   69.482798][ T5111] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   69.494797][ T5166] usb 7-1: config 16 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 3
[   69.514347][ T5166] usb 7-1: New USB device found, idVendor=ea8d, idProduct=db1a, bcdDevice=61.23
[   69.523954][ T5166] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   69.535155][ T5037] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   69.535297][ T5116] usb 4-1: config 16 interface 0 altsetting 0 endpoint 0x5 has invalid maxpacket 56832, setting to 1024
[   69.553586][ T5037] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   69.577980][ T5116] usb 4-1: config 16 interface 0 altsetting 0 bulk endpoint 0x5 has invalid maxpacket 1024
[   69.583085][ T5037] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   69.593201][   T22] usb 5-1: config 16 interface 0 altsetting 0 endpoint 0x5 has invalid maxpacket 56832, setting to 1024
[   69.599456][ T5037] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   69.616980][ T5116] usb 4-1: config 16 interface 0 altsetting 0 bulk endpoint 0x8B has invalid maxpacket 255
[   69.629765][ T5037] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   69.629784][ T5037] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   69.629795][ T5037] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   69.648936][   T22] usb 5-1: config 16 interface 0 altsetting 0 bulk endpoint 0x5 has invalid maxpacket 1024
[   69.655242][ T5037] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   69.671938][   T22] usb 5-1: config 16 interface 0 altsetting 0 bulk endpoint 0x8B has invalid maxpacket 255
[   69.684250][ T5037] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   69.702451][ T5037] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   69.710741][ T5116] usb 4-1: config 16 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 3
[   69.712689][ T5037] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   69.739610][   T22] usb 5-1: config 16 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 3
[   69.753230][ T5116] usb 4-1: New USB device found, idVendor=ea8d, idProduct=db1a, bcdDevice=61.23
[   69.761426][ T5037] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   69.762436][ T5116] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   69.772379][    T9] usb 6-1: Using ep0 maxpacket: 8
[   69.780845][   T22] usb 5-1: New USB device found, idVendor=ea8d, idProduct=db1a, bcdDevice=61.23
[   69.794959][   T22] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   69.797387][ T5037] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   69.824802][ T5166] usb 7-1: usb_control_msg returned -71
[   69.830412][ T5166] usbtmc 7-1:16.0: can't read capabilities
[   69.840800][ T5111] usb 2-1: usb_control_msg returned -71
[   69.851683][ T5111] usbtmc 2-1:16.0: can't read capabilities
[   69.859960][ T5166] usb 7-1: USB disconnect, device number 3
[   69.871796][ T5111] usb 2-1: USB disconnect, device number 3
[   69.887301][ T5037] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   69.920606][ T5037] batman_adv: batadv0: Interface activated: batadv_slave_1
[   69.945217][ T5114] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   69.963770][    T9] usb 6-1: config 16 interface 0 altsetting 0 endpoint 0x5 has invalid maxpacket 56832, setting to 1024
[   69.976285][ T5114] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   69.994560][   T41] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   69.997996][    T9] usb 6-1: config 16 interface 0 altsetting 0 bulk endpoint 0x5 has invalid maxpacket 1024
[   70.006041][ T5037] netdevsim netdevsim2 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   70.020699][    T9] usb 6-1: config 16 interface 0 altsetting 0 bulk endpoint 0x8B has invalid maxpacket 255
[   70.028473][   T41] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   70.040726][ T5037] netdevsim netdevsim2 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   70.063081][   T22] usb 5-1: usb_control_msg returned -71
[   70.063179][    T9] usb 6-1: config 16 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 3
[   70.068810][ T5116] usb 4-1: usb_control_msg returned -71
[   70.082128][ T5037] netdevsim netdevsim2 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   70.088049][   T22] usbtmc 5-1:16.0: can't read capabilities
[   70.102112][ T5037] netdevsim netdevsim2 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   70.111499][    T9] usb 6-1: New USB device found, idVendor=ea8d, idProduct=db1a, bcdDevice=61.23
[   70.116153][   T22] usb 5-1: USB disconnect, device number 2
[   70.135458][ T5116] usbtmc 4-1:16.0: can't read capabilities
[   70.146114][ T5114] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   70.148266][    T9] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   70.170064][ T5116] usb 4-1: USB disconnect, device number 4
[   70.210843][   T41] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   70.233938][   T41] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   70.289333][ T5168] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   70.448873][   T46] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   70.468860][   T46] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   70.513651][    T9] usb 6-1: usb_control_msg returned -71
[   70.519251][    T9] usbtmc 6-1:16.0: can't read capabilities
[   70.551489][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   70.570162][    T9] usb 6-1: USB disconnect, device number 2
[   70.595071][   T41] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   70.632294][   T41] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   70.660380][ T5114] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   70.693457][ T5125] usb 1-1: new high-speed USB device number 2 using dummy_hcd
[   70.713274][  T758] usb 7-1: new high-speed USB device number 4 using dummy_hcd
[   70.739898][   T22] usb 2-1: new high-speed USB device number 4 using dummy_hcd
[   70.751940][ T5116] usb 8-1: new high-speed USB device number 2 using dummy_hcd
[   70.912974][ T5114] usb 4-1: new high-speed USB device number 5 using dummy_hcd
[   70.943020][ T5125] usb 1-1: Using ep0 maxpacket: 8
[   70.948168][ T5133] usb 5-1: new high-speed USB device number 3 using dummy_hcd
[   70.993460][  T758] usb 7-1: Using ep0 maxpacket: 8
[   71.003623][ T5116] usb 8-1: Using ep0 maxpacket: 8
[   71.008816][   T22] usb 2-1: Using ep0 maxpacket: 8
[   71.085797][ T5125] usb 1-1: config 16 interface 0 altsetting 0 endpoint 0x5 has invalid maxpacket 56832, setting to 1024
[   71.103197][ T5125] usb 1-1: config 16 interface 0 altsetting 0 bulk endpoint 0x5 has invalid maxpacket 1024
[   71.119201][ T5111] usb 3-1: new high-speed USB device number 2 using dummy_hcd
[   71.127846][ T5125] usb 1-1: config 16 interface 0 altsetting 0 bulk endpoint 0x8B has invalid maxpacket 255
[   71.133125][ T5116] usb 8-1: config 16 interface 0 altsetting 0 endpoint 0x5 has invalid maxpacket 56832, setting to 1024
[   71.138573][  T758] usb 7-1: config 16 interface 0 altsetting 0 endpoint 0x5 has invalid maxpacket 56832, setting to 1024
[   71.149180][   T22] usb 2-1: config 16 interface 0 altsetting 0 endpoint 0x5 has invalid maxpacket 56832, setting to 1024
[   71.149212][   T22] usb 2-1: config 16 interface 0 altsetting 0 bulk endpoint 0x5 has invalid maxpacket 1024
[   71.149238][   T22] usb 2-1: config 16 interface 0 altsetting 0 bulk endpoint 0x8B has invalid maxpacket 255
[   71.177862][ T5125] usb 1-1: config 16 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 3
[   71.184282][ T5114] usb 4-1: Using ep0 maxpacket: 8
[   71.202184][  T758] usb 7-1: config 16 interface 0 altsetting 0 bulk endpoint 0x5 has invalid maxpacket 1024
[   71.207088][ T5116] usb 8-1: config 16 interface 0 altsetting 0 bulk endpoint 0x5 has invalid maxpacket 1024
[   71.212360][ T5133] usb 5-1: Using ep0 maxpacket: 8
[   71.222152][ T5116] usb 8-1: config 16 interface 0 altsetting 0 bulk endpoint 0x8B has invalid maxpacket 255
[   71.237464][  T758] usb 7-1: config 16 interface 0 altsetting 0 bulk endpoint 0x8B has invalid maxpacket 255
[   71.247781][   T22] usb 2-1: config 16 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 3
[   71.264523][ T5125] usb 1-1: New USB device found, idVendor=ea8d, idProduct=db1a, bcdDevice=61.23
[   71.273697][ T5116] usb 8-1: config 16 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 3
[   71.293726][   T22] usb 2-1: New USB device found, idVendor=ea8d, idProduct=db1a, bcdDevice=61.23
[   71.303045][   T22] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   71.312495][ T5116] usb 8-1: New USB device found, idVendor=ea8d, idProduct=db1a, bcdDevice=61.23
[   71.326889][ T1216] ieee802154 phy0 wpan0: encryption failed: -22
[   71.333651][ T1216] ieee802154 phy1 wpan1: encryption failed: -22
[   71.341666][ T5125] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   71.345027][ T5116] usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   71.350460][  T758] usb 7-1: config 16 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 3
[   71.358525][ T5114] usb 4-1: config 16 interface 0 altsetting 0 endpoint 0x5 has invalid maxpacket 56832, setting to 1024
[   71.372003][  T758] usb 7-1: New USB device found, idVendor=ea8d, idProduct=db1a, bcdDevice=61.23
[   71.401786][ T5114] usb 4-1: config 16 interface 0 altsetting 0 bulk endpoint 0x5 has invalid maxpacket 1024
[   71.413627][ T5114] usb 4-1: config 16 interface 0 altsetting 0 bulk endpoint 0x8B has invalid maxpacket 255
[   71.414216][  T758] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   71.424183][ T5114] usb 4-1: config 16 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 3
[   71.445446][ T5114] usb 4-1: New USB device found, idVendor=ea8d, idProduct=db1a, bcdDevice=61.23
[   71.455293][ T5114] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   71.455748][ T5133] usb 5-1: config 16 interface 0 altsetting 0 endpoint 0x5 has invalid maxpacket 56832, setting to 1024
[   71.481775][ T5111] usb 3-1: Using ep0 maxpacket: 8
[   71.508645][ T5133] usb 5-1: config 16 interface 0 altsetting 0 bulk endpoint 0x5 has invalid maxpacket 1024
[   71.524001][ T5133] usb 5-1: config 16 interface 0 altsetting 0 bulk endpoint 0x8B has invalid maxpacket 255
[   71.540127][ T5133] usb 5-1: config 16 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 3
[   71.559282][ T5133] usb 5-1: New USB device found, idVendor=ea8d, idProduct=db1a, bcdDevice=61.23
[   71.570624][ T5133] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   71.603214][   T22] usb 2-1: usb_control_msg returned -71
[   71.611660][   T22] usbtmc 2-1:16.0: can't read capabilities
[   71.631435][ T5111] usb 3-1: config 16 interface 0 altsetting 0 endpoint 0x5 has invalid maxpacket 56832, setting to 1024
[   71.643619][ T5115] usb 6-1: new high-speed USB device number 3 using dummy_hcd
[   71.644775][ T5111] usb 3-1: config 16 interface 0 altsetting 0 bulk endpoint 0x5 has invalid maxpacket 1024
[   71.664293][ T5125] usb 1-1: usb_control_msg returned -32
[   71.670170][ T5125] usbtmc 1-1:16.0: can't read capabilities
[   71.676223][ T5211] ------------[ cut here ]------------
[   71.677561][ T5111] usb 3-1: config 16 interface 0 altsetting 0 bulk endpoint 0x8B has invalid maxpacket 255
[   71.682978][ T5211] usb 2-1: BOGUS control dir, pipe 80000480 doesn't match bRequestType fd
[   71.702537][ T5116] usb 8-1: usb_control_msg returned -32
[   71.709008][ T5116] usbtmc 8-1:16.0: can't read capabilities
[   71.712503][ T5111] usb 3-1: config 16 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 3
[   71.719180][   T22] usb 2-1: USB disconnect, device number 4
[   71.740909][ T5125] usb 1-1: USB disconnect, device number 2
[   71.747253][  T758] usb 7-1: usb_control_msg returned -32
[   71.752066][ T5211] WARNING: CPU: 1 PID: 5211 at drivers/usb/core/urb.c:411 usb_submit_urb+0x1426/0x1820
[   71.752834][  T758] usbtmc 7-1:16.0: can't read capabilities
[   71.768530][ T5211] Modules linked in:
[   71.772450][ T5211] CPU: 1 PID: 5211 Comm: syz-executor.7 Not tainted 6.4.0-rc1-syzkaller #0
[   71.781154][ T5211] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
[   71.792490][ T5211] RIP: 0010:usb_submit_urb+0x1426/0x1820
[   71.798601][ T5211] Code: 24 40 e8 1d 83 59 fb 4c 89 ef e8 c5 62 f0 fe 8b 4c 24 10 45 89 f8 48 c7 c7 80 51 fd 8a 48 8b 54 24 40 48 89 c6 e8 1a 14 21 fb <0f> 0b e9 22 ef ff ff e8 ee 82 59 fb 44 89 e6 bf ff 00 00 00 e8 51
[   71.802993][ T5111] usb 3-1: New USB device found, idVendor=ea8d, idProduct=db1a, bcdDevice=61.23
[   71.818380][ T5211] RSP: 0018:ffffc900044cfaf8 EFLAGS: 00010286
[   71.818407][ T5211] RAX: 0000000000000000 RBX: ffff888075b61500 RCX: 0000000000000000
[   71.818422][ T5211] RDX: ffff8880157d5940 RSI: ffffffff814caaf7 RDI: 0000000000000001
[   71.818438][ T5211] RBP: ffff88806c666058 R08: 0000000000000001 R09: 0000000000000000
[   71.818452][ T5211] R10: 0000000000000001 R11: 0000000000000001 R12: ffff888022c06708
[   71.818466][ T5211] R13: ffff88806c6660a8 R14: 0000000000000001 R15: 00000000000000fd
[   71.818481][ T5211] FS:  00007fc09009e6c0(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
[   71.818504][ T5211] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   71.818521][ T5211] CR2: 00007f0ed37980c0 CR3: 0000000077d43000 CR4: 00000000003506e0
[   71.818536][ T5211] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   71.818550][ T5211] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   71.818564][ T5211] Call Trace:
[   71.818572][ T5211]  <TASK>
[   71.818582][ T5211]  ? lockdep_init_map_type+0xb0/0x7c0
[   71.818623][ T5211]  ? __init_swait_queue_head+0xca/0x150
[   71.818654][ T5211]  usb_start_wait_urb+0xfe/0x4c0
[   71.818680][ T5211]  ? usb_api_blocking_completion+0xa0/0xa0
[   71.818709][ T5211]  ? rcu_is_watching+0x12/0xb0
[   71.818748][ T5211]  usb_control_msg+0x31f/0x4a0
[   71.818773][ T5211]  ? usb_start_wait_urb+0x4c0/0x4c0
[   71.843479][ T5111] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   71.850082][ T5211]  usbtmc_ioctl+0x1a04/0x2780
[   71.850138][ T5211]  ? usbtmc_generic_read+0x1560/0x1560
[   71.889790][ T5133] usb 5-1: usb_control_msg returned -71
[   71.897720][ T5211]  ? reacquire_held_locks+0x4b0/0x4b0
[   71.897756][ T5211]  ? rcu_is_watching+0x12/0xb0
[   71.897795][ T5211]  ? name_to_dev_t+0x100/0x9b0
[   71.897838][ T5211]  ? __fget_files+0x282/0x420
[   71.897876][ T5211]  ? bpf_lsm_file_ioctl+0x9/0x10
[   71.897906][ T5211]  ? usbtmc_generic_read+0x1560/0x1560
[   71.897937][ T5211]  __x64_sys_ioctl+0x189/0x210
[   71.897973][ T5211]  do_syscall_64+0x38/0xb0
[   71.897995][ T5211]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[   71.898038][ T5211] RIP: 0033:0x7fc08f27ca19
[   71.930156][ T5133] usbtmc 5-1:16.0: can't read capabilities
[   71.931181][ T5211] Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
[   71.931205][ T5211] RSP: 002b:00007fc09009e0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[   71.931231][ T5211] RAX: ffffffffffffffda RBX: 00007fc08f39bf80 RCX: 00007fc08f27ca19
[   71.931249][ T5211] RDX: 0000000020000040 RSI: 00000000c0105b08 RDI: 0000000000000004
[   71.931265][ T5211] RBP: 00007fc08f2d8c88 R08: 0000000000000000 R09: 0000000000000000
[   71.931281][ T5211] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[   71.931296][ T5211] R13: 000000000000000b R14: 00007fc08f39bf80 R15: 00007ffecae28bd8
[   71.931330][ T5211]  </TASK>
[   72.107720][ T5211] Kernel panic - not syncing: kernel: panic_on_warn set ...
[   72.115019][ T5211] CPU: 1 PID: 5211 Comm: syz-executor.7 Not tainted 6.4.0-rc1-syzkaller #0
[   72.123628][ T5211] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
[   72.133712][ T5211] Call Trace:
[   72.136988][ T5211]  <TASK>
[   72.139926][ T5211]  dump_stack_lvl+0xd9/0x1b0
[   72.144549][ T5211]  panic+0x689/0x730
[   72.148486][ T5211]  ? panic_smp_self_stop+0xa0/0xa0
[   72.153637][ T5211]  ? show_trace_log_lvl+0x28e/0x400
[   72.158893][ T5211]  ? usb_submit_urb+0x1426/0x1820
[   72.163950][ T5211]  check_panic_on_warn+0xab/0xb0
[   72.168922][ T5211]  __warn+0xf2/0x380
[   72.172852][ T5211]  ? preempt_schedule_notrace+0x5f/0xe0
[   72.178433][ T5211]  ? usb_submit_urb+0x1426/0x1820
[   72.183486][ T5211]  report_bug+0x3bc/0x580
[   72.187852][ T5211]  handle_bug+0x3c/0x70
[   72.192038][ T5211]  exc_invalid_op+0x17/0x40
[   72.196569][ T5211]  asm_exc_invalid_op+0x1a/0x20
[   72.201464][ T5211] RIP: 0010:usb_submit_urb+0x1426/0x1820
[   72.207215][ T5211] Code: 24 40 e8 1d 83 59 fb 4c 89 ef e8 c5 62 f0 fe 8b 4c 24 10 45 89 f8 48 c7 c7 80 51 fd 8a 48 8b 54 24 40 48 89 c6 e8 1a 14 21 fb <0f> 0b e9 22 ef ff ff e8 ee 82 59 fb 44 89 e6 bf ff 00 00 00 e8 51
[   72.220550][ T5111] usb 3-1: usb_control_msg returned -71
[   72.220584][ T5111] usbtmc 3-1:16.0: can't read capabilities
[   72.238156][ T5211] RSP: 0018:ffffc900044cfaf8 EFLAGS: 00010286
[   72.244226][ T5211] RAX: 0000000000000000 RBX: ffff888075b61500 RCX: 0000000000000000
[   72.252195][ T5211] RDX: ffff8880157d5940 RSI: ffffffff814caaf7 RDI: 0000000000000001
[   72.260165][ T5211] RBP: ffff88806c666058 R08: 0000000000000001 R09: 0000000000000000
[   72.268227][ T5211] R10: 0000000000000001 R11: 0000000000000001 R12: ffff888022c06708
[   72.276196][ T5211] R13: ffff88806c6660a8 R14: 0000000000000001 R15: 00000000000000fd
[   72.284178][ T5211]  ? __warn_printk+0x187/0x310
[   72.288962][ T5211]  ? usb_submit_urb+0x1426/0x1820
[   72.293993][ T5211]  ? lockdep_init_map_type+0xb0/0x7c0
[   72.299389][ T5211]  ? __init_swait_queue_head+0xca/0x150
[   72.304944][ T5211]  usb_start_wait_urb+0xfe/0x4c0
[   72.309975][ T5211]  ? usb_api_blocking_completion+0xa0/0xa0
[   72.315792][ T5211]  ? rcu_is_watching+0x12/0xb0
[   72.320572][ T5211]  usb_control_msg+0x31f/0x4a0
[   72.325348][ T5211]  ? usb_start_wait_urb+0x4c0/0x4c0
[   72.330827][ T5211]  usbtmc_ioctl+0x1a04/0x2780
[   72.335517][ T5211]  ? usbtmc_generic_read+0x1560/0x1560
[   72.340982][ T5211]  ? reacquire_held_locks+0x4b0/0x4b0
[   72.346360][ T5211]  ? rcu_is_watching+0x12/0xb0
[   72.351149][ T5211]  ? name_to_dev_t+0x100/0x9b0
[   72.355925][ T5211]  ? __fget_files+0x282/0x420
[   72.360615][ T5211]  ? bpf_lsm_file_ioctl+0x9/0x10
[   72.365562][ T5211]  ? usbtmc_generic_read+0x1560/0x1560
[   72.371035][ T5211]  __x64_sys_ioctl+0x189/0x210
[   72.375813][ T5211]  do_syscall_64+0x38/0xb0
[   72.380233][ T5211]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[   72.386144][ T5211] RIP: 0033:0x7fc08f27ca19
[   72.390822][ T5211] Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
[   72.410516][ T5211] RSP: 002b:00007fc09009e0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[   72.418936][ T5211] RAX: ffffffffffffffda RBX: 00007fc08f39bf80 RCX: 00007fc08f27ca19
[   72.426909][ T5211] RDX: 0000000020000040 RSI: 00000000c0105b08 RDI: 0000000000000004
[   72.434881][ T5211] RBP: 00007fc08f2d8c88 R08: 0000000000000000 R09: 0000000000000000
[   72.442852][ T5211] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[   72.450831][ T5211] R13: 000000000000000b R14: 00007fc08f39bf80 R15: 00007ffecae28bd8
[   72.458818][ T5211]  </TASK>
[   72.462082][ T5211] Kernel Offset: disabled
[   72.466532][ T5211] Rebooting in 86400 seconds..
