Warning: Permanently added '10.128.0.34' (ED25519) to the list of known hosts.
2024/04/16 17:19:51 ignoring optional flag "sandboxArg"="0"
2024/04/16 17:19:51 parsed 1 programs
2024/04/16 17:19:59 executed programs: 0
[   44.177451][ T5410] Adding 124996k swap on ./swap-file.  Priority:0 extents:1 across:124996k FS
[   44.374272][ T5423] IPVS: ftp: loaded support on port[0] = 21
[   44.391915][ T5451] IPVS: ftp: loaded support on port[0] = 21
[   44.395297][ T5439] IPVS: ftp: loaded support on port[0] = 21
[   44.402488][ T5440] IPVS: ftp: loaded support on port[0] = 21
[   44.417005][ T5437] IPVS: ftp: loaded support on port[0] = 21
[   44.433083][ T5433] IPVS: ftp: loaded support on port[0] = 21
[   44.434643][ T5429] IPVS: ftp: loaded support on port[0] = 21
[   44.441210][ T5456] IPVS: ftp: loaded support on port[0] = 21
[   44.545877][ T5451] chnl_net:caif_netlink_parms(): no params data found
[   44.579073][ T5429] chnl_net:caif_netlink_parms(): no params data found
[   44.595852][ T5456] chnl_net:caif_netlink_parms(): no params data found
[   44.606393][ T5439] chnl_net:caif_netlink_parms(): no params data found
[   44.625097][ T5440] chnl_net:caif_netlink_parms(): no params data found
[   44.645169][ T5423] chnl_net:caif_netlink_parms(): no params data found
[   44.667895][ T5451] bridge0: port 1(bridge_slave_0) entered blocking state
[   44.675097][ T5451] bridge0: port 1(bridge_slave_0) entered disabled state
[   44.682591][ T5451] device bridge_slave_0 entered promiscuous mode
[   44.690722][ T5451] bridge0: port 2(bridge_slave_1) entered blocking state
[   44.697962][ T5451] bridge0: port 2(bridge_slave_1) entered disabled state
[   44.705493][ T5451] device bridge_slave_1 entered promiscuous mode
[   44.714890][ T5433] chnl_net:caif_netlink_parms(): no params data found
[   44.728146][ T5429] bridge0: port 1(bridge_slave_0) entered blocking state
[   44.735572][ T5429] bridge0: port 1(bridge_slave_0) entered disabled state
[   44.743294][ T5429] device bridge_slave_0 entered promiscuous mode
[   44.751243][ T5429] bridge0: port 2(bridge_slave_1) entered blocking state
[   44.758885][ T5429] bridge0: port 2(bridge_slave_1) entered disabled state
[   44.766715][ T5429] device bridge_slave_1 entered promiscuous mode
[   44.784908][ T5456] bridge0: port 1(bridge_slave_0) entered blocking state
[   44.792919][ T5456] bridge0: port 1(bridge_slave_0) entered disabled state
[   44.801545][ T5456] device bridge_slave_0 entered promiscuous mode
[   44.810137][ T5456] bridge0: port 2(bridge_slave_1) entered blocking state
[   44.817642][ T5456] bridge0: port 2(bridge_slave_1) entered disabled state
[   44.826065][ T5456] device bridge_slave_1 entered promiscuous mode
[   44.832799][ T5437] chnl_net:caif_netlink_parms(): no params data found
[   44.845605][ T5429] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   44.858577][ T5451] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   44.869858][ T5451] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   44.881211][ T5440] bridge0: port 1(bridge_slave_0) entered blocking state
[   44.888697][ T5440] bridge0: port 1(bridge_slave_0) entered disabled state
[   44.897183][ T5440] device bridge_slave_0 entered promiscuous mode
[   44.912611][ T5429] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   44.928339][ T5440] bridge0: port 2(bridge_slave_1) entered blocking state
[   44.936077][ T5440] bridge0: port 2(bridge_slave_1) entered disabled state
[   44.944528][ T5440] device bridge_slave_1 entered promiscuous mode
[   44.953744][ T5456] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   44.965374][ T5456] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   44.976691][ T5423] bridge0: port 1(bridge_slave_0) entered blocking state
[   44.984262][ T5423] bridge0: port 1(bridge_slave_0) entered disabled state
[   44.992265][ T5423] device bridge_slave_0 entered promiscuous mode
[   45.000685][ T5423] bridge0: port 2(bridge_slave_1) entered blocking state
[   45.007935][ T5423] bridge0: port 2(bridge_slave_1) entered disabled state
[   45.015808][ T5423] device bridge_slave_1 entered promiscuous mode
[   45.025334][ T5439] bridge0: port 1(bridge_slave_0) entered blocking state
[   45.032449][ T5439] bridge0: port 1(bridge_slave_0) entered disabled state
[   45.040076][ T5439] device bridge_slave_0 entered promiscuous mode
[   45.047130][ T5451] team0: Port device team_slave_0 added
[   45.054560][ T5439] bridge0: port 2(bridge_slave_1) entered blocking state
[   45.061830][ T5439] bridge0: port 2(bridge_slave_1) entered disabled state
[   45.069460][ T5439] device bridge_slave_1 entered promiscuous mode
[   45.080714][ T5456] team0: Port device team_slave_0 added
[   45.092106][ T5433] bridge0: port 1(bridge_slave_0) entered blocking state
[   45.099215][ T5433] bridge0: port 1(bridge_slave_0) entered disabled state
[   45.106962][ T5433] device bridge_slave_0 entered promiscuous mode
[   45.116415][ T5433] bridge0: port 2(bridge_slave_1) entered blocking state
[   45.123818][ T5433] bridge0: port 2(bridge_slave_1) entered disabled state
[   45.131179][ T5433] device bridge_slave_1 entered promiscuous mode
[   45.138412][ T5451] team0: Port device team_slave_1 added
[   45.148813][ T5456] team0: Port device team_slave_1 added
[   45.154908][ T5429] team0: Port device team_slave_0 added
[   45.161263][ T5429] team0: Port device team_slave_1 added
[   45.167860][ T5423] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   45.177814][ T5440] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   45.190264][ T5437] bridge0: port 1(bridge_slave_0) entered blocking state
[   45.197719][ T5437] bridge0: port 1(bridge_slave_0) entered disabled state
[   45.205468][ T5437] device bridge_slave_0 entered promiscuous mode
[   45.214236][ T5437] bridge0: port 2(bridge_slave_1) entered blocking state
[   45.221735][ T5437] bridge0: port 2(bridge_slave_1) entered disabled state
[   45.229404][ T5437] device bridge_slave_1 entered promiscuous mode
[   45.236462][ T5439] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   45.250320][ T5423] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   45.260104][ T5440] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   45.276062][ T5439] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   45.289707][ T5456] batman_adv: batadv0: Adding interface: batadv_slave_0
[   45.297992][ T5456] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   45.329783][ T5456] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   45.343229][ T5456] batman_adv: batadv0: Adding interface: batadv_slave_1
[   45.350764][ T5456] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   45.379192][ T5456] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   45.397240][ T5433] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   45.406805][ T5451] batman_adv: batadv0: Adding interface: batadv_slave_0
[   45.414300][ T5451] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   45.441969][ T5451] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   45.455119][ T5437] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   45.467517][ T5429] batman_adv: batadv0: Adding interface: batadv_slave_0
[   45.474615][ T5429] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   45.501041][ T5429] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   45.515656][ T5423] team0: Port device team_slave_0 added
[   45.521715][ T5440] team0: Port device team_slave_0 added
[   45.528208][ T5433] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   45.537551][ T5451] batman_adv: batadv0: Adding interface: batadv_slave_1
[   45.545375][ T5451] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   45.572340][ T5451] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   45.583726][ T5437] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   45.593386][ T5439] team0: Port device team_slave_0 added
[   45.599453][ T5429] batman_adv: batadv0: Adding interface: batadv_slave_1
[   45.606839][ T5429] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   45.634515][ T5429] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   45.648855][ T5423] team0: Port device team_slave_1 added
[   45.661533][ T5440] team0: Port device team_slave_1 added
[   45.676796][ T5439] team0: Port device team_slave_1 added
[   45.683737][ T5456] device hsr_slave_0 entered promiscuous mode
[   45.690498][ T5456] device hsr_slave_1 entered promiscuous mode
[   45.700487][ T5423] batman_adv: batadv0: Adding interface: batadv_slave_0
[   45.707914][ T5423] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   45.737600][ T5423] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   45.753543][ T5433] team0: Port device team_slave_0 added
[   45.760996][ T5437] team0: Port device team_slave_0 added
[   45.770903][ T5439] batman_adv: batadv0: Adding interface: batadv_slave_0
[   45.779159][ T5439] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   45.805781][ T5439] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   45.817991][ T5439] batman_adv: batadv0: Adding interface: batadv_slave_1
[   45.825564][ T5439] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   45.852728][ T5439] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   45.864868][ T5423] batman_adv: batadv0: Adding interface: batadv_slave_1
[   45.872155][ T5423] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   45.898523][ T5423] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   45.910938][ T5440] batman_adv: batadv0: Adding interface: batadv_slave_0
[   45.918145][ T5440] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   45.945023][ T5440] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   45.956369][ T5433] team0: Port device team_slave_1 added
[   45.962490][ T5437] team0: Port device team_slave_1 added
[   45.973800][ T5429] device hsr_slave_0 entered promiscuous mode
[   45.980459][ T5429] device hsr_slave_1 entered promiscuous mode
[   45.987016][ T5429] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   45.994706][ T5429] Cannot create hsr debugfs directory
[   46.009235][ T5451] device hsr_slave_0 entered promiscuous mode
[   46.016224][ T5451] device hsr_slave_1 entered promiscuous mode
[   46.023298][ T5451] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   46.031122][ T5451] Cannot create hsr debugfs directory
[   46.036861][ T5440] batman_adv: batadv0: Adding interface: batadv_slave_1
[   46.044238][ T5440] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   46.073672][ T5440] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   46.088367][ T5433] batman_adv: batadv0: Adding interface: batadv_slave_0
[   46.095493][ T5433] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   46.123250][ T5433] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   46.140239][ T5437] batman_adv: batadv0: Adding interface: batadv_slave_0
[   46.147545][ T5437] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   46.176321][ T5437] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   46.203273][ T5433] batman_adv: batadv0: Adding interface: batadv_slave_1
[   46.210953][ T5433] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   46.238827][ T5433] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   46.250243][ T5437] batman_adv: batadv0: Adding interface: batadv_slave_1
[   46.257709][ T5437] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   46.284748][ T5437] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   46.300301][ T5423] device hsr_slave_0 entered promiscuous mode
[   46.307434][ T5423] device hsr_slave_1 entered promiscuous mode
[   46.314618][ T5423] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   46.322421][ T5423] Cannot create hsr debugfs directory
[   46.335410][ T5439] device hsr_slave_0 entered promiscuous mode
[   46.342358][ T5439] device hsr_slave_1 entered promiscuous mode
[   46.349562][ T5439] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   46.358350][ T5439] Cannot create hsr debugfs directory
[   46.386253][ T5440] device hsr_slave_0 entered promiscuous mode
[   46.393278][ T5440] device hsr_slave_1 entered promiscuous mode
[   46.400411][ T5440] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   46.403548][    T5] Bluetooth: hci6: command 0x0409 tx timeout
[   46.408542][ T5440] Cannot create hsr debugfs directory
[   46.415453][    T5] Bluetooth: hci4: command 0x0409 tx timeout
[   46.432787][    T5] Bluetooth: hci1: command 0x0409 tx timeout
[   46.439309][    T5] Bluetooth: hci3: command 0x0409 tx timeout
[   46.440489][ T5433] device hsr_slave_0 entered promiscuous mode
[   46.445616][    T5] Bluetooth: hci5: command 0x0409 tx timeout
[   46.458126][    T5] Bluetooth: hci2: command 0x0409 tx timeout
[   46.458306][ T5433] device hsr_slave_1 entered promiscuous mode
[   46.464250][    T5] Bluetooth: hci0: command 0x0409 tx timeout
[   46.478052][ T5433] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   46.485894][   T19] Bluetooth: hci7: command 0x0409 tx timeout
[   46.492117][ T5433] Cannot create hsr debugfs directory
[   46.506349][ T5437] device hsr_slave_0 entered promiscuous mode
[   46.512789][ T5437] device hsr_slave_1 entered promiscuous mode
[   46.519854][ T5437] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   46.527982][ T5437] Cannot create hsr debugfs directory
[   46.612042][ T5456] netdevsim netdevsim3 netdevsim0: renamed from eth0
[   46.623156][ T5456] netdevsim netdevsim3 netdevsim1: renamed from eth1
[   46.632293][ T5456] netdevsim netdevsim3 netdevsim2: renamed from eth2
[   46.645678][ T5456] netdevsim netdevsim3 netdevsim3: renamed from eth3
[   46.661898][ T5451] netdevsim netdevsim2 netdevsim0: renamed from eth0
[   46.670258][ T5451] netdevsim netdevsim2 netdevsim1: renamed from eth1
[   46.684890][ T5451] netdevsim netdevsim2 netdevsim2: renamed from eth2
[   46.692895][ T5451] netdevsim netdevsim2 netdevsim3: renamed from eth3
[   46.718075][ T5429] netdevsim netdevsim0 netdevsim0: renamed from eth0
[   46.736918][ T5429] netdevsim netdevsim0 netdevsim1: renamed from eth1
[   46.745364][ T5440] netdevsim netdevsim1 netdevsim0: renamed from eth0
[   46.754651][ T5440] netdevsim netdevsim1 netdevsim1: renamed from eth1
[   46.762701][ T5429] netdevsim netdevsim0 netdevsim2: renamed from eth2
[   46.772078][ T5429] netdevsim netdevsim0 netdevsim3: renamed from eth3
[   46.783186][ T5456] 8021q: adding VLAN 0 to HW filter on device bond0
[   46.790855][ T5440] netdevsim netdevsim1 netdevsim2: renamed from eth2
[   46.800371][ T5440] netdevsim netdevsim1 netdevsim3: renamed from eth3
[   46.831664][ T5439] netdevsim netdevsim6 netdevsim0: renamed from eth0
[   46.840895][ T5439] netdevsim netdevsim6 netdevsim1: renamed from eth1
[   46.857698][ T5456] 8021q: adding VLAN 0 to HW filter on device team0
[   46.867837][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   46.875876][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   46.884708][ T5439] netdevsim netdevsim6 netdevsim2: renamed from eth2
[   46.892811][ T5439] netdevsim netdevsim6 netdevsim3: renamed from eth3
[   46.907808][ T5433] netdevsim netdevsim7 netdevsim0: renamed from eth0
[   46.916602][ T5433] netdevsim netdevsim7 netdevsim1: renamed from eth1
[   46.925079][ T5433] netdevsim netdevsim7 netdevsim2: renamed from eth2
[   46.934013][ T5433] netdevsim netdevsim7 netdevsim3: renamed from eth3
[   46.946098][ T5437] netdevsim netdevsim4 netdevsim0: renamed from eth0
[   46.963678][ T5511] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   46.972198][ T5511] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   46.981446][ T5511] bridge0: port 1(bridge_slave_0) entered blocking state
[   46.988669][ T5511] bridge0: port 1(bridge_slave_0) entered forwarding state
[   46.996296][ T5511] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   47.004865][ T5511] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   47.013272][ T5511] bridge0: port 2(bridge_slave_1) entered blocking state
[   47.021137][ T5511] bridge0: port 2(bridge_slave_1) entered forwarding state
[   47.028954][ T5511] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   47.038727][ T5511] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   47.049387][ T5511] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   47.058845][ T5511] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   47.067203][ T5511] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   47.075841][ T5511] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   47.084181][ T5511] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   47.092531][ T5511] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   47.106347][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   47.115982][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   47.125435][ T5437] netdevsim netdevsim4 netdevsim1: renamed from eth1
[   47.134717][ T5456] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   47.146222][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   47.160513][ T5451] 8021q: adding VLAN 0 to HW filter on device bond0
[   47.170198][ T5437] netdevsim netdevsim4 netdevsim2: renamed from eth2
[   47.178164][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   47.187789][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   47.208719][ T5429] 8021q: adding VLAN 0 to HW filter on device bond0
[   47.216182][ T5437] netdevsim netdevsim4 netdevsim3: renamed from eth3
[   47.229357][ T5440] 8021q: adding VLAN 0 to HW filter on device bond0
[   47.237212][ T5423] netdevsim netdevsim5 netdevsim0: renamed from eth0
[   47.247391][ T5423] netdevsim netdevsim5 netdevsim1: renamed from eth1
[   47.256319][ T5423] netdevsim netdevsim5 netdevsim2: renamed from eth2
[   47.265606][ T5423] netdevsim netdevsim5 netdevsim3: renamed from eth3
[   47.278410][ T5429] 8021q: adding VLAN 0 to HW filter on device team0
[   47.295358][ T5451] 8021q: adding VLAN 0 to HW filter on device team0
[   47.303089][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   47.311806][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   47.320061][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   47.330270][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   47.339194][ T5506] bridge0: port 1(bridge_slave_0) entered blocking state
[   47.346833][ T5506] bridge0: port 1(bridge_slave_0) entered forwarding state
[   47.354844][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   47.363014][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   47.371349][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   47.380738][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   47.390123][ T5506] bridge0: port 2(bridge_slave_1) entered blocking state
[   47.397800][ T5506] bridge0: port 2(bridge_slave_1) entered forwarding state
[   47.411322][ T5440] 8021q: adding VLAN 0 to HW filter on device team0
[   47.419445][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   47.427730][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   47.435918][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   47.464770][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   47.474783][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   47.484782][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   47.495152][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   47.506219][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   47.516687][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   47.526181][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   47.535196][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   47.544078][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   47.553021][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   47.561762][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   47.569770][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   47.580249][ T5429] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   47.597935][ T5439] 8021q: adding VLAN 0 to HW filter on device bond0
[   47.608565][ T5518] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   47.617449][ T5518] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   47.628978][ T5518] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   47.637804][ T5518] bridge0: port 1(bridge_slave_0) entered blocking state
[   47.646069][ T5518] bridge0: port 1(bridge_slave_0) entered forwarding state
[   47.655642][ T5518] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   47.674280][ T5512] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   47.686442][ T5512] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   47.695389][ T5512] bridge0: port 1(bridge_slave_0) entered blocking state
[   47.702834][ T5512] bridge0: port 1(bridge_slave_0) entered forwarding state
[   47.711308][ T5512] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   47.720516][ T5512] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   47.729502][ T5512] bridge0: port 2(bridge_slave_1) entered blocking state
[   47.737241][ T5512] bridge0: port 2(bridge_slave_1) entered forwarding state
[   47.745713][ T5512] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   47.755651][ T5512] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   47.765144][ T5512] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   47.774257][ T5512] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   47.784689][ T5512] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   47.793967][ T5512] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   47.813451][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   47.821879][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   47.830725][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   47.839731][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   47.849020][ T5505] bridge0: port 2(bridge_slave_1) entered blocking state
[   47.856228][ T5505] bridge0: port 2(bridge_slave_1) entered forwarding state
[   47.864172][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   47.874052][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   47.883459][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   47.892451][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   47.901248][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   47.909621][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   47.918350][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   47.926733][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   47.935436][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   47.943771][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   47.952586][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   47.961840][ T5456] 8021q: adding VLAN 0 to HW filter on device batadv0
[   47.980586][ T5423] 8021q: adding VLAN 0 to HW filter on device bond0
[   47.993905][ T5429] 8021q: adding VLAN 0 to HW filter on device batadv0
[   48.007236][ T5439] 8021q: adding VLAN 0 to HW filter on device team0
[   48.018063][ T5440] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   48.026876][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   48.037372][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   48.044927][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   48.052521][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   48.060543][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   48.068978][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   48.077936][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   48.086840][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   48.095440][   T35] bridge0: port 1(bridge_slave_0) entered blocking state
[   48.102798][   T35] bridge0: port 1(bridge_slave_0) entered forwarding state
[   48.111232][ T5433] 8021q: adding VLAN 0 to HW filter on device bond0
[   48.121075][ T5451] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   48.133194][ T5451] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   48.151152][ T5437] 8021q: adding VLAN 0 to HW filter on device bond0
[   48.162427][ T5423] 8021q: adding VLAN 0 to HW filter on device team0
[   48.170150][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   48.178272][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   48.186465][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   48.194767][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   48.203065][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   48.211856][   T35] bridge0: port 2(bridge_slave_1) entered blocking state
[   48.219170][   T35] bridge0: port 2(bridge_slave_1) entered forwarding state
[   48.226976][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   48.235866][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   48.244431][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   48.252756][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   48.261212][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   48.269543][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   48.277662][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   48.285241][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   48.293501][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   48.301038][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   48.311452][ T5456] device veth0_vlan entered promiscuous mode
[   48.334910][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   48.344197][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   48.352504][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   48.361418][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   48.370019][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   48.378487][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   48.386779][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   48.395587][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   48.404162][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   48.413560][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   48.422462][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   48.430172][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   48.438214][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   48.446094][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   48.454037][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   48.463757][ T5456] device veth1_vlan entered promiscuous mode
[   48.476994][ T5437] 8021q: adding VLAN 0 to HW filter on device team0
[   48.483810][ T5518] Bluetooth: hci0: command 0x041b tx timeout
[   48.484729][ T5439] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   48.491134][ T5518] Bluetooth: hci2: command 0x041b tx timeout
[   48.511275][ T5451] 8021q: adding VLAN 0 to HW filter on device batadv0
[   48.518559][ T5518] Bluetooth: hci5: command 0x041b tx timeout
[   48.518992][ T5433] 8021q: adding VLAN 0 to HW filter on device team0
[   48.524988][ T5518] Bluetooth: hci3: command 0x041b tx timeout
[   48.533249][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   48.538507][ T5518] Bluetooth: hci1: command 0x041b tx timeout
[   48.546589][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   48.552259][ T5518] Bluetooth: hci4: command 0x041b tx timeout
[   48.559868][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   48.566374][ T5518] Bluetooth: hci6: command 0x041b tx timeout
[   48.574333][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   48.580133][ T5504] Bluetooth: hci7: command 0x041b tx timeout
[   48.588173][   T35] bridge0: port 1(bridge_slave_0) entered blocking state
[   48.601465][   T35] bridge0: port 1(bridge_slave_0) entered forwarding state
[   48.609327][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   48.617989][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   48.626411][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   48.634892][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   48.643732][   T35] bridge0: port 2(bridge_slave_1) entered blocking state
[   48.651130][   T35] bridge0: port 2(bridge_slave_1) entered forwarding state
[   48.658892][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   48.668317][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   48.676326][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   48.684182][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   48.693981][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   48.704056][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   48.712846][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   48.720774][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   48.729502][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   48.737400][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   48.745847][ T5429] device veth0_vlan entered promiscuous mode
[   48.757752][ T5429] device veth1_vlan entered promiscuous mode
[   48.785202][ T5433] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   48.796138][ T5433] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   48.809756][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   48.819017][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   48.827399][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   48.836094][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   48.844975][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   48.853938][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   48.862287][ T5509] bridge0: port 1(bridge_slave_0) entered blocking state
[   48.870557][ T5509] bridge0: port 1(bridge_slave_0) entered forwarding state
[   48.878592][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   48.887319][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   48.895934][ T5509] bridge0: port 2(bridge_slave_1) entered blocking state
[   48.902976][ T5509] bridge0: port 2(bridge_slave_1) entered forwarding state
[   48.910738][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   48.920254][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   48.929448][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   48.938220][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   48.947405][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   48.956730][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   48.966299][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   48.974932][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   48.983148][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   48.992242][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   49.002373][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   49.010419][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   49.018401][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   49.027015][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   49.035918][ T5509] bridge0: port 1(bridge_slave_0) entered blocking state
[   49.043021][ T5509] bridge0: port 1(bridge_slave_0) entered forwarding state
[   49.051203][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   49.060228][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   49.068929][ T5509] bridge0: port 2(bridge_slave_1) entered blocking state
[   49.076251][ T5509] bridge0: port 2(bridge_slave_1) entered forwarding state
[   49.085040][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   49.093806][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   49.102220][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   49.111002][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   49.119720][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   49.128670][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   49.136514][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   49.144434][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   49.152383][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   49.165586][ T5440] 8021q: adding VLAN 0 to HW filter on device batadv0
[   49.180968][ T5456] device veth0_macvtap entered promiscuous mode
[   49.200066][ T5423] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   49.211601][ T5429] device veth0_macvtap entered promiscuous mode
[   49.220736][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   49.231004][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   49.240104][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   49.249016][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   49.258580][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   49.268086][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   49.277627][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   49.286895][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   49.296005][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   49.315229][ T5439] 8021q: adding VLAN 0 to HW filter on device batadv0
[   49.324495][ T5456] device veth1_macvtap entered promiscuous mode
[   49.341312][ T5451] device veth0_vlan entered promiscuous mode
[   49.351782][ T5429] device veth1_macvtap entered promiscuous mode
[   49.359854][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   49.369008][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   49.377151][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   49.385252][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   49.394240][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   49.402311][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   49.411834][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   49.420527][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   49.428330][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   49.436385][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   49.445236][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   49.453962][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   49.462386][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   49.480018][ T5451] device veth1_vlan entered promiscuous mode
[   49.491396][ T5440] device veth0_vlan entered promiscuous mode
[   49.498392][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   49.506439][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   49.514446][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   49.523241][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   49.531602][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   49.540092][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   49.549464][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   49.558094][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   49.566601][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   49.575466][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   49.585221][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   49.592897][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   49.611531][ T5429] batman_adv: batadv0: Interface activated: batadv_slave_0
[   49.625809][ T5429] batman_adv: batadv0: Interface activated: batadv_slave_1
[   49.637699][ T5437] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   49.649111][ T5456] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   49.662734][ T5456] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   49.674057][ T5456] batman_adv: batadv0: Interface activated: batadv_slave_0
[   49.682008][   T19] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   49.692860][   T19] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   49.702625][   T19] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   49.712040][   T19] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   49.720950][   T19] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   49.729608][   T19] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   49.738555][   T19] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   49.748283][   T19] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   49.758727][ T5433] 8021q: adding VLAN 0 to HW filter on device batadv0
[   49.769913][ T5429] netdevsim netdevsim0 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   49.779474][ T5429] netdevsim netdevsim0 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   49.788965][ T5429] netdevsim netdevsim0 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   49.798915][ T5429] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   49.815999][ T5456] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   49.827500][ T5456] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   49.838858][ T5456] batman_adv: batadv0: Interface activated: batadv_slave_1
[   49.850978][ T5456] netdevsim netdevsim3 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   49.860423][ T5456] netdevsim netdevsim3 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   49.870359][ T5456] netdevsim netdevsim3 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   49.880439][ T5456] netdevsim netdevsim3 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   49.891576][ T5440] device veth1_vlan entered promiscuous mode
[   49.900370][ T5507] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   49.909408][ T5507] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   49.918478][ T5507] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   49.927760][ T5507] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   49.937944][ T5507] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   49.946829][ T5507] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   49.958983][ T5507] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   49.985761][ T5507] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   49.997306][ T5507] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   50.010244][ T5423] 8021q: adding VLAN 0 to HW filter on device batadv0
[   50.027890][ T5440] device veth0_macvtap entered promiscuous mode
[   50.036933][ T5451] device veth0_macvtap entered promiscuous mode
[   50.061379][ T5439] device veth0_vlan entered promiscuous mode
[   50.069033][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   50.078673][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   50.088649][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   50.097892][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   50.106070][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   50.114318][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   50.124758][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   50.133421][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   50.141604][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   50.149733][ T5509] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   50.165442][ T5440] device veth1_macvtap entered promiscuous mode
[   50.175289][ T5451] device veth1_macvtap entered promiscuous mode
[   50.193289][ T5437] 8021q: adding VLAN 0 to HW filter on device batadv0
[   50.193982][    T8] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   50.209988][    T8] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   50.220860][ T5517] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   50.232557][ T5517] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   50.241784][ T5517] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   50.250506][ T5517] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   50.259160][ T5517] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   50.276965][ T3028] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   50.280954][ T5451] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   50.289748][ T3028] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   50.297941][ T5451] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   50.319987][ T5451] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   50.331600][ T5451] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   50.342723][ T5451] batman_adv: batadv0: Interface activated: batadv_slave_0
[   50.357260][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   50.366092][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   50.375038][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   50.383050][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   50.392139][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   50.407257][ T5451] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   50.418692][ T5451] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   50.429466][ T5451] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   50.440348][ T5451] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   50.451170][ T5451] batman_adv: batadv0: Interface activated: batadv_slave_1
[   50.461380][ T5439] device veth1_vlan entered promiscuous mode
[   50.469567][ T5433] device veth0_vlan entered promiscuous mode
[   50.476471][ T3028] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   50.488082][ T3028] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   50.496334][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   50.504779][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   50.512750][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   50.520613][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   50.528847][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   50.540993][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   50.550069][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   50.559336][ T5504] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   50.572031][ T5451] netdevsim netdevsim2 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   50.582059][ T5504] Bluetooth: hci1: command 0x040f tx timeout
[   50.588243][ T5451] netdevsim netdevsim2 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   50.597230][ T5451] netdevsim netdevsim2 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   50.597342][ T5504] Bluetooth: hci3: command 0x040f tx timeout
[   50.607952][ T5451] netdevsim netdevsim2 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   50.613575][ T5504] Bluetooth: hci5: command 0x040f tx timeout
[   50.629535][ T5504] Bluetooth: hci2: command 0x040f tx timeout
[   50.638542][ T5504] Bluetooth: hci0: command 0x040f tx timeout
[   50.638767][ T5433] device veth1_vlan entered promiscuous mode
[   50.645839][ T5510] Bluetooth: hci7: command 0x040f tx timeout
[   50.657627][ T5510] Bluetooth: hci6: command 0x040f tx timeout
[   50.661858][ T5423] device veth0_vlan entered promiscuous mode
[   50.664752][ T5510] Bluetooth: hci4: command 0x040f tx timeout
[   50.674101][ T5440] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   50.688077][ T5440] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   50.698616][ T5440] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   50.709768][ T5440] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   50.720134][ T5440] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   50.731728][ T5440] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   50.742641][ T5440] batman_adv: batadv0: Interface activated: batadv_slave_0
[   50.760406][   T67] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   50.773801][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   50.773834][   T67] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   50.783191][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   50.797187][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   50.805376][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   50.813582][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   50.821768][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   50.830287][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   50.838762][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   50.846636][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   50.855216][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   50.866374][ T5423] device veth1_vlan entered promiscuous mode
[   50.873590][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   50.881439][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   50.889128][   T35] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   50.902958][ T5439] device veth0_macvtap entered promiscuous mode
[   50.911024][ T5440] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   50.913514][ T5504] usb 4-1: new full-speed USB device number 2 using dummy_hcd
[   50.921907][ T5440] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   50.940002][ T5440] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   50.950833][ T5440] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   50.962384][ T5440] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   50.973953][ T5440] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   50.984848][ T5440] batman_adv: batadv0: Interface activated: batadv_slave_1
[   50.997290][ T5433] device veth0_macvtap entered promiscuous mode
[   51.007996][ T5433] device veth1_macvtap entered promiscuous mode
[   51.018763][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   51.028203][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   51.040129][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   51.049090][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   51.058440][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   51.068698][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   51.078617][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   51.089432][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   51.097910][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   51.108340][ T5439] device veth1_macvtap entered promiscuous mode
[   51.116960][ T5437] device veth0_vlan entered promiscuous mode
[   51.132304][ T5433] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   51.143763][ T5433] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.154721][ T5433] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   51.166026][ T5433] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.176285][ T5433] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   51.187791][ T5433] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.198071][ T5433] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   51.210173][ T5433] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.222262][ T5433] batman_adv: batadv0: Interface activated: batadv_slave_0
[   51.230845][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   51.239169][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   51.247360][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   51.255415][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   51.263258][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   51.271130][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   51.279608][ T5506] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   51.293450][ T5504] usb 4-1: New USB device found, idVendor=0c72, idProduct=0012, bcdDevice=a8.99
[   51.302513][ T5440] netdevsim netdevsim1 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   51.303950][ T5504] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   51.313297][ T5440] netdevsim netdevsim1 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   51.322442][ T5504] usb 4-1: config 0 descriptor??
[   51.330827][ T5507] usb 1-1: new full-speed USB device number 2 using dummy_hcd
[   51.337383][ T5440] netdevsim netdevsim1 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   51.352892][ T5440] netdevsim netdevsim1 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   51.370493][ T5423] device veth0_macvtap entered promiscuous mode
[   51.380530][ T5437] device veth1_vlan entered promiscuous mode
[   51.390910][   T67] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   51.401888][   T67] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   51.408964][ T5439] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   51.421403][ T5439] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.431383][ T5439] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   51.442664][ T5439] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.453103][ T5439] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   51.465133][ T5439] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.475387][ T5439] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   51.486427][ T5439] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.496745][ T5439] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   51.508317][ T5439] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.519414][ T5439] batman_adv: batadv0: Interface activated: batadv_slave_0
[   51.531830][ T3692] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   51.540588][ T3692] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   51.549098][ T3692] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   51.559205][ T3692] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   51.567575][ T3692] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   51.576855][ T3692] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   51.586526][ T5433] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   51.597561][ T5433] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.607846][ T5433] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   51.619208][ T5433] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.630021][ T5433] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   51.630187][ T5504] peak_usb 4-1:0.0: PEAK-System PCAN-USB FD v0 fw v0.0.0 (1 channels)
[   51.641028][ T5433] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.659554][ T5433] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   51.670600][ T5433] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.681983][ T5433] batman_adv: batadv0: Interface activated: batadv_slave_1
[   51.695566][ T5439] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   51.707720][ T5439] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.717965][ T5439] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   51.723424][ T5507] usb 1-1: New USB device found, idVendor=0c72, idProduct=0012, bcdDevice=a8.99
[   51.729956][ T5439] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.738326][ T5507] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   51.748166][ T5439] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   51.764640][ T5507] usb 1-1: config 0 descriptor??
[   51.769332][ T5439] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.784804][ T5439] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   51.795936][ T5439] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.806351][ T5439] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   51.818958][ T5439] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.830489][ T5439] batman_adv: batadv0: Interface activated: batadv_slave_1
[   51.840866][ T3692] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   51.848908][ T5504] peak_usb 4-1:0.0 can0: sending command failure: -22
[   51.856173][ T5504] peak_usb 4-1:0.0 can0: sending command failure: -22
[   51.864132][ T3692] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   51.873071][ T3692] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   51.881543][ T5504] peak_usb 4-1:0.0 can0: sending command failure: -22
[   51.888853][ T3692] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   51.897462][ T3692] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   51.908435][ T5433] netdevsim netdevsim7 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   51.919030][ T5433] netdevsim netdevsim7 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   51.931105][ T5433] netdevsim netdevsim7 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   51.942829][ T5433] netdevsim netdevsim7 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   51.956347][  T230] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   51.963747][ T5423] device veth1_macvtap entered promiscuous mode
[   51.965696][  T230] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   51.990146][ T5439] netdevsim netdevsim6 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   52.001125][ T5439] netdevsim netdevsim6 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   52.011272][ T5439] netdevsim netdevsim6 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   52.020668][ T5439] netdevsim netdevsim6 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   52.033109][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   52.033491][ T5507] peak_usb 1-1:0.0: PEAK-System PCAN-USB FD v0 fw v0.0.0 (1 channels)
[   52.041659][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   52.057234][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   52.085127][    T8] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   52.095029][ T5504] peak_usb: probe of 4-1:0.0 failed with error -22
[   52.102346][    T8] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   52.108498][ T5437] device veth0_macvtap entered promiscuous mode
[   52.117864][ T5504] usb 4-1: USB disconnect, device number 2
[   52.129285][ T5423] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.141173][ T5423] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.152711][ T5423] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.163837][ T5423] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.178026][ T5423] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.188598][ T5423] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.202256][ T5423] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.213278][ T5423] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.224030][ T5423] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.235101][ T5423] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.245724][ T5423] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.253604][ T5507] peak_usb 1-1:0.0 can1: sending command failure: -22
[   52.256350][ T5423] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.263225][ T5507] peak_usb 1-1:0.0 can1: sending command failure: -22
[   52.273974][ T5423] batman_adv: batadv0: Interface activated: batadv_slave_0
[   52.280369][ T5507] peak_usb 1-1:0.0 can1: sending command failure: -22
[   52.298203][ T5518] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   52.306459][ T5518] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   52.315068][ T5518] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   52.324367][ T5518] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   52.333560][ T5518] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   52.342348][ T5517] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   52.355204][ T5423] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   52.365980][ T5423] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.376424][ T5423] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   52.387105][ T5423] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.397079][ T5423] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   52.409277][ T5423] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.420075][ T5423] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   52.431170][ T5423] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.441331][ T5423] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   52.443416][    T7] usb 3-1: new full-speed USB device number 2 using dummy_hcd
[   52.452625][ T5423] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.471188][ T5423] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   52.483577][ T5423] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.494912][ T5423] batman_adv: batadv0: Interface activated: batadv_slave_1
[   52.505293][ T5437] device veth1_macvtap entered promiscuous mode
[   52.515354][ T5507] peak_usb: probe of 1-1:0.0 failed with error -22
[   52.523892][    T8] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   52.524445][ T5510] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   52.532685][ T5507] usb 1-1: USB disconnect, device number 2
[   52.547314][    T8] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
2024/04/16 17:20:08 executed programs: 8
[   52.549686][ T5510] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   52.572612][ T5510] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   52.582467][ T5510] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   52.592991][ T5423] netdevsim netdevsim5 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   52.602570][ T5423] netdevsim netdevsim5 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   52.612295][ T5423] netdevsim netdevsim5 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   52.622859][ T5423] netdevsim netdevsim5 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   52.643612][ T5510] Bluetooth: hci2: command 0x0419 tx timeout
[   52.649853][ T5510] Bluetooth: hci5: command 0x0419 tx timeout
[   52.659439][ T5437] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.670653][ T5510] Bluetooth: hci3: command 0x0419 tx timeout
[   52.677410][ T5437] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.687458][ T5510] Bluetooth: hci1: command 0x0419 tx timeout
[   52.698161][ T5437] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.712003][ T5437] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.722691][ T5437] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.733766][ T5517] Bluetooth: hci4: command 0x0419 tx timeout
[   52.734251][ T5437] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.739945][ T5517] Bluetooth: hci6: command 0x0419 tx timeout
[   52.751383][ T5437] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.756292][ T5517] Bluetooth: hci7: command 0x0419 tx timeout
[   52.767776][ T5437] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.773680][ T5517] Bluetooth: hci0: command 0x0419 tx timeout
[   52.784298][ T5437] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.800900][ T5437] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.811174][ T5437] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.822591][ T5437] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.833530][    T7] usb 3-1: New USB device found, idVendor=0c72, idProduct=0012, bcdDevice=a8.99
[   52.833866][ T5437] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.842718][    T7] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   52.854353][ T5437] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.863442][ T5506] usb 4-1: new full-speed USB device number 3 using dummy_hcd
[   52.872818][ T5437] batman_adv: batadv0: Interface activated: batadv_slave_0
[   52.886039][    T7] usb 3-1: config 0 descriptor??
[   52.893267][ T3028] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   52.904763][ T5437] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   52.906256][ T3028] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   52.920830][ T5437] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.933922][ T5437] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   52.945285][ T5437] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.956166][ T5437] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   52.968135][ T5437] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.978846][ T5504] usb 2-1: new full-speed USB device number 2 using dummy_hcd
[   52.979583][ T5437] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   52.997809][ T5437] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.008551][ T5437] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.019160][ T5437] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.029775][ T5437] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.047956][ T5437] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.058902][ T5437] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.070891][ T5437] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.082595][ T5437] batman_adv: batadv0: Interface activated: batadv_slave_1
[   53.091864][ T5511] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   53.101700][ T5511] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   53.110715][ T5511] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   53.119541][ T5511] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   53.129358][ T5511] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   53.162213][ T5437] netdevsim netdevsim4 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   53.171152][ T5437] netdevsim netdevsim4 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   53.173837][    T7] peak_usb 3-1:0.0: PEAK-System PCAN-USB FD v0 fw v0.0.0 (1 channels)
[   53.181116][ T5437] netdevsim netdevsim4 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   53.199180][ T5437] netdevsim netdevsim4 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   53.215589][ T3028] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   53.229792][ T3028] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   53.244535][   T67] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   53.252795][   T67] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   53.264009][    T8] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   53.264923][ T5597] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   53.272696][    T8] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   53.272949][    T8] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   53.281819][ T5506] usb 4-1: New USB device found, idVendor=0c72, idProduct=0012, bcdDevice=a8.99
[   53.291741][    T8] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   53.299715][ T5506] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   53.322830][ T5597] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   53.332047][ T5597] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   53.340456][ T5597] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   53.343439][   T35] usb 1-1: new full-speed USB device number 3 using dummy_hcd
[   53.348845][ T5506] usb 4-1: config 0 descriptor??
[   53.373581][ T5504] usb 2-1: New USB device found, idVendor=0c72, idProduct=0012, bcdDevice=a8.99
[   53.393816][    T7] peak_usb 3-1:0.0 can0: sending command failure: -22
[   53.401061][    T7] peak_usb 3-1:0.0 can0: sending command failure: -22
[   53.413593][ T5504] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   53.424872][    T8] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   53.432974][    T8] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   53.459176][ T3028] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   53.471579][    T7] peak_usb 3-1:0.0 can0: sending command failure: -22
[   53.479634][ T3028] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   53.491060][ T5504] usb 2-1: config 0 descriptor??
[   53.497718][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   53.507352][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   53.524514][ T3028] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   53.532440][ T3028] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   53.548343][ T5594] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   53.567446][    T7] peak_usb: probe of 3-1:0.0 failed with error -22
[   53.594068][    T7] usb 3-1: USB disconnect, device number 2
[   53.623522][ T5506] peak_usb 4-1:0.0: PEAK-System PCAN-USB FD v0 fw v0.0.0 (1 channels)
[   53.693503][ T5508] usb 8-1: new full-speed USB device number 2 using dummy_hcd
[   53.723467][   T35] usb 1-1: New USB device found, idVendor=0c72, idProduct=0012, bcdDevice=a8.99
[   53.734173][   T35] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   53.753579][   T35] usb 1-1: config 0 descriptor??
[   53.763745][ T5507] usb 7-1: new full-speed USB device number 2 using dummy_hcd
[   53.764285][ T5504] peak_usb 2-1:0.0: PEAK-System PCAN-USB FD v0 fw v0.0.0 (1 channels)
[   53.813402][ T5517] usb 6-1: new full-speed USB device number 2 using dummy_hcd
[   53.843593][ T5506] peak_usb 4-1:0.0 can1: sending command failure: -22
[   53.850729][ T5506] peak_usb 4-1:0.0 can1: sending command failure: -22
[   53.858176][ T5506] peak_usb 4-1:0.0 can1: sending command failure: -22
[   53.873556][ T5594] usb 5-1: new full-speed USB device number 2 using dummy_hcd
[   53.913879][ T5506] peak_usb: probe of 4-1:0.0 failed with error -22
[   53.973428][ T5504] peak_usb 2-1:0.0 can0: sending command failure: -22
[   53.980494][ T5504] peak_usb 2-1:0.0 can0: sending command failure: -22
[   53.987800][ T5504] peak_usb 2-1:0.0 can0: sending command failure: -22
[   54.013657][ T5504] peak_usb: probe of 2-1:0.0 failed with error -22
[   54.033623][   T35] peak_usb 1-1:0.0: PEAK-System PCAN-USB FD v0 fw v0.0.0 (1 channels)
[   54.044570][   T19] usb 4-1: USB disconnect, device number 3
[   54.093495][ T5508] usb 8-1: New USB device found, idVendor=0c72, idProduct=0012, bcdDevice=a8.99
[   54.103106][ T5508] usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   54.115717][ T5508] usb 8-1: config 0 descriptor??
[   54.143696][ T5507] usb 7-1: New USB device found, idVendor=0c72, idProduct=0012, bcdDevice=a8.99
[   54.153517][ T5507] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   54.173455][ T5517] usb 6-1: New USB device found, idVendor=0c72, idProduct=0012, bcdDevice=a8.99
[   54.178750][ T5507] usb 7-1: config 0 descriptor??
[   54.187437][ T5517] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   54.191168][ T5432] usb 2-1: USB disconnect, device number 2
[   54.198678][ T5517] usb 6-1: config 0 descriptor??
[   54.233593][ T5594] usb 5-1: New USB device found, idVendor=0c72, idProduct=0012, bcdDevice=a8.99
[   54.242851][ T5594] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   54.243455][   T35] peak_usb 1-1:0.0 can2: sending command failure: -22
[   54.254810][ T5594] usb 5-1: config 0 descriptor??
[   54.277440][   T35] peak_usb 1-1:0.0 can2: sending command failure: -22
[   54.285148][   T35] peak_usb 1-1:0.0 can2: sending command failure: -22
[   54.353561][   T35] peak_usb: probe of 1-1:0.0 failed with error -22
[   54.393470][ T5508] peak_usb 8-1:0.0: PEAK-System PCAN-USB FD v0 fw v0.0.0 (1 channels)
[   54.413570][ T5510] usb 3-1: new full-speed USB device number 3 using dummy_hcd
[   54.453429][ T5517] peak_usb 6-1:0.0: PEAK-System PCAN-USB FD v0 fw v0.0.0 (1 channels)
[   54.459297][   T35] usb 1-1: USB disconnect, device number 3
[   54.468564][ T5507] peak_usb 7-1:0.0: PEAK-System PCAN-USB FD v0 fw v0.0.0 (1 channels)
[   54.523472][ T5594] peak_usb 5-1:0.0: PEAK-System PCAN-USB FD v0 fw v0.0.0 (1 channels)
[   54.603492][ T5508] peak_usb 8-1:0.0 can0: sending command failure: -22
[   54.610421][ T5508] peak_usb 8-1:0.0 can0: sending command failure: -22
[   54.619780][ T5508] peak_usb 8-1:0.0 can0: sending command failure: -22
[   54.663666][ T5508] peak_usb: probe of 8-1:0.0 failed with error -22
[   54.663673][ T5517] peak_usb 6-1:0.0 can1: sending command failure: -22
[   54.678754][ T5517] peak_usb 6-1:0.0 can1: sending command failure: -22
[   54.686807][ T5517] peak_usb 6-1:0.0 can1: sending command failure: -22
[   54.693441][ T5507] peak_usb 7-1:0.0 can3: sending command failure: -22
[   54.702062][ T5507] peak_usb 7-1:0.0 can3: sending command failure: -22
[   54.709637][ T5507] peak_usb 7-1:0.0 can3: sending command failure: -22
[   54.733699][ T5517] peak_usb: probe of 6-1:0.0 failed with error -22
[   54.743509][ T5594] peak_usb 5-1:0.0 can2: sending command failure: -22
[   54.750380][ T5594] peak_usb 5-1:0.0 can2: sending command failure: -22
[   54.760848][ T5594] peak_usb 5-1:0.0 can2: sending command failure: -22
[   54.774739][ T5507] peak_usb: probe of 7-1:0.0 failed with error -22
[   54.795081][ T5510] usb 3-1: New USB device found, idVendor=0c72, idProduct=0012, bcdDevice=a8.99
[   54.805057][ T5507] usb 8-1: USB disconnect, device number 2
[   54.813999][ T5594] peak_usb: probe of 5-1:0.0 failed with error -22
[   54.821418][ T5510] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   54.846340][ T3692] usb 4-1: new full-speed USB device number 4 using dummy_hcd
[   54.854027][ T5510] usb 3-1: config 0 descriptor??
[   54.876511][ T5508] usb 6-1: USB disconnect, device number 2
[   54.895712][ T5511] usb 7-1: USB disconnect, device number 2
[   54.945522][ T5432] usb 5-1: USB disconnect, device number 2
[   54.983782][ T5594] usb 2-1: new full-speed USB device number 3 using dummy_hcd
[   55.113628][ T5510] peak_usb 3-1:0.0: PEAK-System PCAN-USB FD v0 fw v0.0.0 (1 channels)
[   55.213449][ T3692] usb 4-1: New USB device found, idVendor=0c72, idProduct=0012, bcdDevice=a8.99
[   55.222805][ T3692] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   55.234948][ T3692] usb 4-1: config 0 descriptor??
[   55.253443][   T35] usb 1-1: new full-speed USB device number 4 using dummy_hcd
[   55.333529][ T5510] peak_usb 3-1:0.0 can0: sending command failure: -22
[   55.340435][ T5510] peak_usb 3-1:0.0 can0: sending command failure: -22
[   55.347825][ T5510] peak_usb 3-1:0.0 can0: sending command failure: -22
[   55.354985][ T5594] usb 2-1: New USB device found, idVendor=0c72, idProduct=0012, bcdDevice=a8.99
[   55.364859][ T5594] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   55.375589][ T5594] usb 2-1: config 0 descriptor??
[   55.403674][ T5510] peak_usb: probe of 3-1:0.0 failed with error -22
[   55.493797][ T3692] peak_usb 4-1:0.0: PEAK-System PCAN-USB FD v0 fw v0.0.0 (1 channels)
[   55.534513][ T5507] usb 3-1: USB disconnect, device number 3
[   55.583427][    T7] usb 8-1: new full-speed USB device number 3 using dummy_hcd
[   55.633518][ T5594] peak_usb 2-1:0.0: PEAK-System PCAN-USB FD v0 fw v0.0.0 (1 channels)
[   55.663514][   T35] usb 1-1: New USB device found, idVendor=0c72, idProduct=0012, bcdDevice=a8.99
[   55.673488][   T35] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   55.682722][   T35] usb 1-1: config 0 descriptor??
[   55.713436][ T3692] peak_usb 4-1:0.0 can1: sending command failure: -22
[   55.720690][ T3692] peak_usb 4-1:0.0 can1: sending command failure: -22
[   55.728230][ T3692] peak_usb 4-1:0.0 can1: sending command failure: -22
[   55.783674][ T3692] peak_usb: probe of 4-1:0.0 failed with error -22
[   55.853481][ T5594] peak_usb 2-1:0.0 can0: sending command failure: -22
[   55.860277][ T5594] peak_usb 2-1:0.0 can0: sending command failure: -22
[   55.867249][ T5594] peak_usb 2-1:0.0 can0: sending command failure: -22
[   55.914901][ T5507] usb 4-1: USB disconnect, device number 4
[   55.933876][ T5594] peak_usb: probe of 2-1:0.0 failed with error -22
[   55.943854][    T7] usb 8-1: New USB device found, idVendor=0c72, idProduct=0012, bcdDevice=a8.99
[   55.953793][    T7] usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   55.955917][   T35] peak_usb 1-1:0.0: PEAK-System PCAN-USB FD v0 fw v0.0.0 (1 channels)
[   55.970389][    T7] usb 8-1: config 0 descriptor??
[   56.053812][ T5432] usb 2-1: USB disconnect, device number 3
[   56.163549][   T35] peak_usb 1-1:0.0 can2: sending command failure: -22
[   56.170902][   T35] peak_usb 1-1:0.0 can2: sending command failure: -22
[   56.178275][   T35] peak_usb 1-1:0.0 can2: sending command failure: -22
[   56.223643][   T35] peak_usb: probe of 1-1:0.0 failed with error -22
[   56.233424][    T7] peak_usb 8-1:0.0: PEAK-System PCAN-USB FD v0 fw v0.0.0 (1 channels)
[   56.364645][ T3692] usb 1-1: USB disconnect, device number 4
[   56.453471][    T7] peak_usb 8-1:0.0 can0: sending command failure: -22
[   56.460684][    T7] peak_usb 8-1:0.0 can0: sending command failure: -22
[   56.468327][    T7] peak_usb 8-1:0.0 can0: sending command failure: -22
[   56.523506][    T7] peak_usb: probe of 8-1:0.0 failed with error -22
[   56.653772][    T7] usb 8-1: USB disconnect, device number 3
[   63.291092][ T5625] kmemleak: 27 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
BUG: memory leak
unreferenced object 0xffff88811f526100 (size 128):
  comm "kworker/0:3", pid 5504, jiffies 4294942422 (age 14.200s)
  hex dump (first 32 bytes):
    40 09 c5 1f 81 88 ff ff 00 00 00 00 00 00 00 00  @...............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000132fc14b>] pcan_usb_fd_init+0x195/0x240
    [<00000000922696ed>] peak_usb_probe+0x37d/0x480
    [<00000000503c0641>] usb_probe_interface+0x167/0x350
    [<0000000080ae215f>] really_probe+0x154/0x490
    [<00000000947a220a>] driver_probe_device+0x85/0x100
    [<00000000a46214f7>] __device_attach_driver+0xeb/0x130
    [<00000000f45e478f>] bus_for_each_drv+0xb1/0xf0
    [<0000000017ceca78>] __device_attach+0xed/0x240
    [<0000000000713add>] bus_probe_device+0xc6/0xe0
    [<00000000a394cde1>] device_add+0x566/0xc60
    [<00000000f5111a4e>] usb_set_configuration+0x814/0xb50
    [<0000000080726e49>] usb_generic_driver_probe+0x86/0xc0
    [<00000000e432aa08>] usb_probe_device+0x5c/0x150
    [<0000000080ae215f>] really_probe+0x154/0x490
    [<00000000947a220a>] driver_probe_device+0x85/0x100
    [<00000000a46214f7>] __device_attach_driver+0xeb/0x130

BUG: memory leak
unreferenced object 0xffff88811fccdf80 (size 128):
  comm "kworker/1:4", pid 5507, jiffies 4294942459 (age 13.830s)
  hex dump (first 32 bytes):
    40 89 cb 1f 81 88 ff ff 00 00 00 00 00 00 00 00  @...............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000132fc14b>] pcan_usb_fd_init+0x195/0x240
    [<00000000922696ed>] peak_usb_probe+0x37d/0x480
    [<00000000503c0641>] usb_probe_interface+0x167/0x350
    [<0000000080ae215f>] really_probe+0x154/0x490
    [<00000000947a220a>] driver_probe_device+0x85/0x100
    [<00000000a46214f7>] __device_attach_driver+0xeb/0x130
    [<00000000f45e478f>] bus_for_each_drv+0xb1/0xf0
    [<0000000017ceca78>] __device_attach+0xed/0x240
    [<0000000000713add>] bus_probe_device+0xc6/0xe0
    [<00000000a394cde1>] device_add+0x566/0xc60
    [<00000000f5111a4e>] usb_set_configuration+0x814/0xb50
    [<0000000080726e49>] usb_generic_driver_probe+0x86/0xc0
    [<00000000e432aa08>] usb_probe_device+0x5c/0x150
    [<0000000080ae215f>] really_probe+0x154/0x490
    [<00000000947a220a>] driver_probe_device+0x85/0x100
    [<00000000a46214f7>] __device_attach_driver+0xeb/0x130

BUG: memory leak
unreferenced object 0xffff88811b525400 (size 512):
  comm "kworker/1:4", pid 5507, jiffies 4294942459 (age 13.830s)
  hex dump (first 32 bytes):
    01 00 00 00 00 00 00 00 ff ff ff ff ff ff ff ff  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000ee59f789>] pcan_usb_fd_init+0x1c0/0x240
    [<00000000922696ed>] peak_usb_probe+0x37d/0x480
    [<00000000503c0641>] usb_probe_interface+0x167/0x350
    [<0000000080ae215f>] really_probe+0x154/0x490
    [<00000000947a220a>] driver_probe_device+0x85/0x100
    [<00000000a46214f7>] __device_attach_driver+0xeb/0x130
    [<00000000f45e478f>] bus_for_each_drv+0xb1/0xf0
    [<0000000017ceca78>] __device_attach+0xed/0x240
    [<0000000000713add>] bus_probe_device+0xc6/0xe0
    [<00000000a394cde1>] device_add+0x566/0xc60
    [<00000000f5111a4e>] usb_set_configuration+0x814/0xb50
    [<0000000080726e49>] usb_generic_driver_probe+0x86/0xc0
    [<00000000e432aa08>] usb_probe_device+0x5c/0x150
    [<0000000080ae215f>] really_probe+0x154/0x490
    [<00000000947a220a>] driver_probe_device+0x85/0x100
    [<00000000a46214f7>] __device_attach_driver+0xeb/0x130

