Warning: Permanently added '10.128.0.99' (ED25519) to the list of known hosts.
2024/04/16 17:19:30 ignoring optional flag "sandboxArg"="0"
2024/04/16 17:19:30 parsed 1 programs
[   26.550355][ T3510] cgroup: Unknown subsys name 'net'
[   26.670271][ T3510] cgroup: Unknown subsys name 'rlimit'
2024/04/16 17:19:38 executed programs: 0
[   34.332150][ T3510] kmemleak: 8 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
[   35.501986][ T3536] Bluetooth: hci2: unexpected cc 0x0c03 length: 249 > 1
[   35.507868][ T3537] Bluetooth: hci1: unexpected cc 0x0c03 length: 249 > 1
[   35.509111][ T3536] Bluetooth: hci2: unexpected cc 0x1003 length: 249 > 9
[   35.516263][ T3538] Bluetooth: hci1: unexpected cc 0x1003 length: 249 > 9
[   35.523256][ T3536] Bluetooth: hci2: unexpected cc 0x1001 length: 249 > 9
[   35.530832][ T3538] Bluetooth: hci1: unexpected cc 0x1001 length: 249 > 9
[   35.537480][ T3536] Bluetooth: hci2: unexpected cc 0x0c23 length: 249 > 4
[   35.544803][ T3538] Bluetooth: hci1: unexpected cc 0x0c23 length: 249 > 4
[   35.551511][ T3536] Bluetooth: hci2: unexpected cc 0x0c25 length: 249 > 3
[   35.558428][ T3538] Bluetooth: hci1: unexpected cc 0x0c25 length: 249 > 3
[   35.565546][ T3536] Bluetooth: hci2: unexpected cc 0x0c38 length: 249 > 2
[   35.572471][ T3538] Bluetooth: hci1: unexpected cc 0x0c38 length: 249 > 2
[   35.604099][ T3546] Bluetooth: hci4: unexpected cc 0x0c03 length: 249 > 1
[   35.611189][ T3546] Bluetooth: hci5: unexpected cc 0x0c03 length: 249 > 1
[   35.618839][ T3546] Bluetooth: hci6: unexpected cc 0x0c03 length: 249 > 1
[   35.626152][ T3546] Bluetooth: hci7: unexpected cc 0x0c03 length: 249 > 1
[   35.633526][ T3546] Bluetooth: hci4: unexpected cc 0x1003 length: 249 > 9
[   35.640771][ T3546] Bluetooth: hci5: unexpected cc 0x1003 length: 249 > 9
[   35.647925][ T3546] Bluetooth: hci6: unexpected cc 0x1003 length: 249 > 9
[   35.654960][ T3546] Bluetooth: hci7: unexpected cc 0x1003 length: 249 > 9
[   35.656227][ T3525] chnl_net:caif_netlink_parms(): no params data found
[   35.662193][ T3546] Bluetooth: hci4: unexpected cc 0x1001 length: 249 > 9
[   35.672059][ T3524] chnl_net:caif_netlink_parms(): no params data found
[   35.675873][ T3546] Bluetooth: hci5: unexpected cc 0x1001 length: 249 > 9
[   35.689857][ T3546] Bluetooth: hci6: unexpected cc 0x1001 length: 249 > 9
[   35.690350][ T3548] Bluetooth: hci7: unexpected cc 0x1001 length: 249 > 9
[   35.697179][ T3551] Bluetooth: hci4: unexpected cc 0x0c23 length: 249 > 4
[   35.706535][ T3548] Bluetooth: hci5: unexpected cc 0x0c23 length: 249 > 4
[   35.714640][ T3551] Bluetooth: hci4: unexpected cc 0x0c25 length: 249 > 3
[   35.722918][ T3548] Bluetooth: hci7: unexpected cc 0x0c23 length: 249 > 4
[   35.729776][ T3551] Bluetooth: hci6: unexpected cc 0x0c23 length: 249 > 4
[   35.737117][ T3548] Bluetooth: hci7: unexpected cc 0x0c25 length: 249 > 3
[   35.744120][ T3551] Bluetooth: hci5: unexpected cc 0x0c25 length: 249 > 3
[   35.751196][ T3548] Bluetooth: hci4: unexpected cc 0x0c38 length: 249 > 2
[   35.758790][ T3552] Bluetooth: hci7: unexpected cc 0x0c38 length: 249 > 2
[   35.765287][ T3548] Bluetooth: hci5: unexpected cc 0x0c38 length: 249 > 2
[   35.772242][ T3546] Bluetooth: hci6: unexpected cc 0x0c25 length: 249 > 3
[   35.786463][ T3546] Bluetooth: hci6: unexpected cc 0x0c38 length: 249 > 2
[   35.833170][ T3525] bridge0: port 1(bridge_slave_0) entered blocking state
[   35.840497][ T3525] bridge0: port 1(bridge_slave_0) entered disabled state
[   35.847971][ T3525] device bridge_slave_0 entered promiscuous mode
[   35.858661][ T3525] bridge0: port 2(bridge_slave_1) entered blocking state
[   35.865804][ T3525] bridge0: port 2(bridge_slave_1) entered disabled state
[   35.873285][ T3525] device bridge_slave_1 entered promiscuous mode
[   35.918032][ T3525] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   35.928859][ T3525] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   35.945707][ T3524] bridge0: port 1(bridge_slave_0) entered blocking state
[   35.952949][ T3524] bridge0: port 1(bridge_slave_0) entered disabled state
[   35.960340][ T3524] device bridge_slave_0 entered promiscuous mode
[   35.967118][ T3529] chnl_net:caif_netlink_parms(): no params data found
[   35.977045][ T3525] team0: Port device team_slave_0 added
[   35.983574][ T3525] team0: Port device team_slave_1 added
[   35.994976][ T3524] bridge0: port 2(bridge_slave_1) entered blocking state
[   36.002256][ T3524] bridge0: port 2(bridge_slave_1) entered disabled state
[   36.009722][ T3524] device bridge_slave_1 entered promiscuous mode
[   36.022776][ T3524] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   36.034633][ T3527] chnl_net:caif_netlink_parms(): no params data found
[   36.055416][ T3524] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   36.064766][ T3525] batman_adv: batadv0: Adding interface: batadv_slave_0
[   36.071924][ T3525] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   36.098687][ T3525] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   36.121176][ T3528] chnl_net:caif_netlink_parms(): no params data found
[   36.131716][ T3525] batman_adv: batadv0: Adding interface: batadv_slave_1
[   36.138919][ T3525] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   36.165503][ T3525] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   36.185410][ T3524] team0: Port device team_slave_0 added
[   36.204981][ T3529] bridge0: port 1(bridge_slave_0) entered blocking state
[   36.212096][ T3529] bridge0: port 1(bridge_slave_0) entered disabled state
[   36.219643][ T3529] device bridge_slave_0 entered promiscuous mode
[   36.226655][ T3524] team0: Port device team_slave_1 added
[   36.237618][ T3530] chnl_net:caif_netlink_parms(): no params data found
[   36.246153][ T3525] device hsr_slave_0 entered promiscuous mode
[   36.252568][ T3525] device hsr_slave_1 entered promiscuous mode
[   36.261350][ T3529] bridge0: port 2(bridge_slave_1) entered blocking state
[   36.268624][ T3529] bridge0: port 2(bridge_slave_1) entered disabled state
[   36.276177][ T3529] device bridge_slave_1 entered promiscuous mode
[   36.288423][ T3524] batman_adv: batadv0: Adding interface: batadv_slave_0
[   36.295635][ T3524] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   36.321945][ T3524] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   36.348116][ T3529] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   36.358725][ T3524] batman_adv: batadv0: Adding interface: batadv_slave_1
[   36.366094][ T3524] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   36.392433][ T3524] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   36.409728][ T3528] bridge0: port 1(bridge_slave_0) entered blocking state
[   36.416926][ T3528] bridge0: port 1(bridge_slave_0) entered disabled state
[   36.424651][ T3528] device bridge_slave_0 entered promiscuous mode
[   36.431746][ T3527] bridge0: port 1(bridge_slave_0) entered blocking state
[   36.439136][ T3527] bridge0: port 1(bridge_slave_0) entered disabled state
[   36.446536][ T3527] device bridge_slave_0 entered promiscuous mode
[   36.453911][ T3529] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   36.472902][ T3528] bridge0: port 2(bridge_slave_1) entered blocking state
[   36.480050][ T3528] bridge0: port 2(bridge_slave_1) entered disabled state
[   36.487370][ T3528] device bridge_slave_1 entered promiscuous mode
[   36.494227][ T3527] bridge0: port 2(bridge_slave_1) entered blocking state
[   36.501358][ T3527] bridge0: port 2(bridge_slave_1) entered disabled state
[   36.508904][ T3527] device bridge_slave_1 entered promiscuous mode
[   36.524092][ T3530] bridge0: port 1(bridge_slave_0) entered blocking state
[   36.531384][ T3530] bridge0: port 1(bridge_slave_0) entered disabled state
[   36.538857][ T3530] device bridge_slave_0 entered promiscuous mode
[   36.546519][ T3524] device hsr_slave_0 entered promiscuous mode
[   36.552877][ T3524] device hsr_slave_1 entered promiscuous mode
[   36.559259][ T3524] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   36.566923][ T3524] Cannot create hsr debugfs directory
[   36.579688][ T3529] team0: Port device team_slave_0 added
[   36.588756][ T3530] bridge0: port 2(bridge_slave_1) entered blocking state
[   36.595877][ T3530] bridge0: port 2(bridge_slave_1) entered disabled state
[   36.603680][ T3530] device bridge_slave_1 entered promiscuous mode
[   36.615775][ T3529] team0: Port device team_slave_1 added
[   36.631489][ T3528] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   36.641750][ T3527] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   36.662249][ T3528] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   36.672359][ T3527] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   36.684151][ T3530] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   36.693720][ T3529] batman_adv: batadv0: Adding interface: batadv_slave_0
[   36.700892][ T3529] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   36.727344][ T3529] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   36.738976][ T3529] batman_adv: batadv0: Adding interface: batadv_slave_1
[   36.746005][ T3529] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   36.772544][ T3529] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   36.790456][ T3530] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   36.820470][ T3527] team0: Port device team_slave_0 added
[   36.840157][ T3528] team0: Port device team_slave_0 added
[   36.852821][ T3527] team0: Port device team_slave_1 added
[   36.858942][ T3530] team0: Port device team_slave_0 added
[   36.864920][ T3528] team0: Port device team_slave_1 added
[   36.871911][ T3529] device hsr_slave_0 entered promiscuous mode
[   36.878770][ T3529] device hsr_slave_1 entered promiscuous mode
[   36.885004][ T3529] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   36.893140][ T3529] Cannot create hsr debugfs directory
[   36.903678][ T3530] team0: Port device team_slave_1 added
[   36.920049][ T3527] batman_adv: batadv0: Adding interface: batadv_slave_0
[   36.927079][ T3527] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   36.953671][ T3527] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   36.965021][ T3525] netdevsim netdevsim6 netdevsim0: renamed from eth0
[   36.977315][ T3528] batman_adv: batadv0: Adding interface: batadv_slave_0
[   36.984625][ T3528] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   37.011281][ T3528] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   37.027645][ T3527] batman_adv: batadv0: Adding interface: batadv_slave_1
[   37.037811][ T3527] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   37.064451][ T3527] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   37.076127][ T3525] netdevsim netdevsim6 netdevsim1: renamed from eth1
[   37.083861][ T3528] batman_adv: batadv0: Adding interface: batadv_slave_1
[   37.091011][ T3528] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   37.117165][ T3528] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   37.132073][ T3524] netdevsim netdevsim0 netdevsim0: renamed from eth0
[   37.141938][ T3525] netdevsim netdevsim6 netdevsim2: renamed from eth2
[   37.149458][ T3530] batman_adv: batadv0: Adding interface: batadv_slave_0
[   37.156487][ T3530] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   37.183426][ T3530] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   37.196168][ T3530] batman_adv: batadv0: Adding interface: batadv_slave_1
[   37.203466][ T3530] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   37.229650][ T3530] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   37.240924][ T3524] netdevsim netdevsim0 netdevsim1: renamed from eth1
[   37.251659][ T3525] netdevsim netdevsim6 netdevsim3: renamed from eth3
[   37.267501][ T3524] netdevsim netdevsim0 netdevsim2: renamed from eth2
[   37.275864][ T3527] device hsr_slave_0 entered promiscuous mode
[   37.282364][ T3527] device hsr_slave_1 entered promiscuous mode
[   37.289327][ T3527] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   37.297797][ T3527] Cannot create hsr debugfs directory
[   37.309019][ T3528] device hsr_slave_0 entered promiscuous mode
[   37.315437][ T3528] device hsr_slave_1 entered promiscuous mode
[   37.321967][ T3528] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   37.329586][ T3528] Cannot create hsr debugfs directory
[   37.340341][ T3524] netdevsim netdevsim0 netdevsim3: renamed from eth3
[   37.355426][ T3530] device hsr_slave_0 entered promiscuous mode
[   37.361904][ T3530] device hsr_slave_1 entered promiscuous mode
[   37.368377][ T3530] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   37.376096][ T3530] Cannot create hsr debugfs directory
[   37.405041][ T3529] netdevsim netdevsim5 netdevsim0: renamed from eth0
[   37.418485][ T3529] netdevsim netdevsim5 netdevsim1: renamed from eth1
[   37.426145][ T3529] netdevsim netdevsim5 netdevsim2: renamed from eth2
[   37.445017][ T3529] netdevsim netdevsim5 netdevsim3: renamed from eth3
[   37.501920][ T3525] 8021q: adding VLAN 0 to HW filter on device bond0
[   37.514086][ T3527] netdevsim netdevsim4 netdevsim0: renamed from eth0
[   37.525633][ T3524] 8021q: adding VLAN 0 to HW filter on device bond0
[   37.533761][ T3527] netdevsim netdevsim4 netdevsim1: renamed from eth1
[   37.542161][ T3527] netdevsim netdevsim4 netdevsim2: renamed from eth2
[   37.553660][ T3525] 8021q: adding VLAN 0 to HW filter on device team0
[   37.567115][ T3529] 8021q: adding VLAN 0 to HW filter on device bond0
[   37.576386][ T3524] 8021q: adding VLAN 0 to HW filter on device team0
[   37.583228][   T46] Bluetooth: hci0: Opcode 0x c03 failed: -110
[   37.591048][ T3527] netdevsim netdevsim4 netdevsim3: renamed from eth3
[   37.600399][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   37.608217][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   37.615883][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   37.623805][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   37.631471][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   37.640164][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   37.648615][ T3577] bridge0: port 1(bridge_slave_0) entered blocking state
[   37.655648][ T3577] bridge0: port 1(bridge_slave_0) entered forwarding state
[   37.658030][ T3540] Bluetooth: hci2: command 0x0409 tx timeout
[   37.663053][ T3538] Bluetooth: hci3: Opcode 0x c03 failed: -110
[   37.668922][ T3540] Bluetooth: hci1: command 0x0409 tx timeout
[   37.676544][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   37.689559][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   37.698023][ T3577] bridge0: port 2(bridge_slave_1) entered blocking state
[   37.705143][ T3577] bridge0: port 2(bridge_slave_1) entered forwarding state
[   37.712900][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   37.721305][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   37.729741][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   37.738065][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   37.746181][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   37.754948][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   37.763381][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   37.771154][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   37.781652][ T3529] 8021q: adding VLAN 0 to HW filter on device team0
[   37.792236][ T3524] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   37.802980][ T3524] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   37.817768][ T3540] Bluetooth: hci7: command 0x0409 tx timeout
[   37.824691][ T3577] Bluetooth: hci6: command 0x0409 tx timeout
[   37.826956][ T3525] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   37.831817][ T3577] Bluetooth: hci5: command 0x0409 tx timeout
[   37.847947][ T3577] Bluetooth: hci4: command 0x0409 tx timeout
[   37.854090][ T3525] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   37.867829][ T3530] netdevsim netdevsim7 netdevsim0: renamed from eth0
[   37.875519][ T3528] netdevsim netdevsim1 netdevsim0: renamed from eth0
[   37.886044][ T3528] netdevsim netdevsim1 netdevsim1: renamed from eth1
[   37.898177][ T3528] netdevsim netdevsim1 netdevsim2: renamed from eth2
[   37.905964][ T3528] netdevsim netdevsim1 netdevsim3: renamed from eth3
[   37.917407][ T3525] 8021q: adding VLAN 0 to HW filter on device batadv0
[   37.924627][ T3530] netdevsim netdevsim7 netdevsim1: renamed from eth1
[   37.935262][ T3524] 8021q: adding VLAN 0 to HW filter on device batadv0
[   37.942688][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   37.951843][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   37.959356][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   37.967855][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   37.979305][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   37.987508][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   37.995611][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   38.004340][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   38.012724][   T25] bridge0: port 1(bridge_slave_0) entered blocking state
[   38.019788][   T25] bridge0: port 1(bridge_slave_0) entered forwarding state
[   38.027287][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   38.035921][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   38.044343][   T25] bridge0: port 2(bridge_slave_1) entered blocking state
[   38.051442][   T25] bridge0: port 2(bridge_slave_1) entered forwarding state
[   38.058995][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   38.070611][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   38.079148][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   38.087554][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   38.095955][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   38.104255][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   38.112482][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   38.120669][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   38.128832][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   38.136832][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   38.144928][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   38.153584][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   38.162027][   T25] bridge0: port 1(bridge_slave_0) entered blocking state
[   38.171690][   T25] bridge0: port 1(bridge_slave_0) entered forwarding state
[   38.179155][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   38.186522][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   38.194192][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   38.201742][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   38.223091][ T3527] 8021q: adding VLAN 0 to HW filter on device bond0
[   38.230177][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   38.237590][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   38.245619][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   38.253692][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   38.261181][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   38.268879][ T3530] netdevsim netdevsim7 netdevsim2: renamed from eth2
[   38.279432][ T3530] netdevsim netdevsim7 netdevsim3: renamed from eth3
[   38.306347][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   38.315040][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   38.323736][ T3583] bridge0: port 2(bridge_slave_1) entered blocking state
[   38.331088][ T3583] bridge0: port 2(bridge_slave_1) entered forwarding state
[   38.340308][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   38.348799][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   38.357120][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   38.366057][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   38.374486][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   38.382996][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   38.391378][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   38.400041][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   38.408386][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   38.416474][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   38.425151][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   38.437063][ T3529] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   38.451829][ T3527] 8021q: adding VLAN 0 to HW filter on device team0
[   38.468766][ T3529] 8021q: adding VLAN 0 to HW filter on device batadv0
[   38.476426][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   38.485300][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   38.493713][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   38.502303][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   38.510702][ T3349] bridge0: port 1(bridge_slave_0) entered blocking state
[   38.517859][ T3349] bridge0: port 1(bridge_slave_0) entered forwarding state
[   38.526225][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   38.534749][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   38.542987][ T3349] bridge0: port 2(bridge_slave_1) entered blocking state
[   38.550049][ T3349] bridge0: port 2(bridge_slave_1) entered forwarding state
[   38.557605][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   38.566281][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   38.573807][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   38.581231][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   38.590213][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   38.600120][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   38.609206][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   38.621276][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   38.634854][ T3527] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   38.645461][ T3527] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   38.657529][ T3528] 8021q: adding VLAN 0 to HW filter on device bond0
[   38.669801][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   38.678903][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   38.687306][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   38.695687][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   38.704330][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   38.712617][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   38.735397][ T3528] 8021q: adding VLAN 0 to HW filter on device team0
[   38.743540][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   38.752169][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   38.760834][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   38.769284][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   38.776718][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   38.784373][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   38.792636][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   38.800892][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   38.808701][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   38.816658][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   38.824463][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   38.833537][ T3525] device veth0_vlan entered promiscuous mode
[   38.846885][ T3527] 8021q: adding VLAN 0 to HW filter on device batadv0
[   38.857075][ T3530] 8021q: adding VLAN 0 to HW filter on device bond0
[   38.870440][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   38.881035][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   38.889741][ T3583] bridge0: port 1(bridge_slave_0) entered blocking state
[   38.896778][ T3583] bridge0: port 1(bridge_slave_0) entered forwarding state
[   38.904425][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   38.913260][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   38.921882][ T3583] bridge0: port 2(bridge_slave_1) entered blocking state
[   38.929293][ T3583] bridge0: port 2(bridge_slave_1) entered forwarding state
[   38.937337][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   38.945844][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   38.955074][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   38.963660][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   38.972275][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   38.980731][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   38.989630][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   38.998307][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   39.006976][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   39.015261][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   39.026207][ T3525] device veth1_vlan entered promiscuous mode
[   39.035801][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   39.044533][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   39.055414][ T3528] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   39.067290][ T3528] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   39.077340][ T3524] device veth0_vlan entered promiscuous mode
[   39.086606][ T3530] 8021q: adding VLAN 0 to HW filter on device team0
[   39.094108][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   39.102785][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   39.110986][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   39.118728][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   39.126192][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   39.134354][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   39.142806][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   39.150544][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   39.161336][ T3525] device veth0_macvtap entered promiscuous mode
[   39.171231][ T3524] device veth1_vlan entered promiscuous mode
[   39.184852][ T3529] device veth0_vlan entered promiscuous mode
[   39.191569][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   39.199588][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   39.208186][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   39.216421][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   39.225774][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   39.234282][ T3349] bridge0: port 1(bridge_slave_0) entered blocking state
[   39.241440][ T3349] bridge0: port 1(bridge_slave_0) entered forwarding state
[   39.249038][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   39.257461][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   39.265962][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   39.273420][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   39.281259][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   39.289576][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   39.298071][ T3525] device veth1_macvtap entered promiscuous mode
[   39.308756][ T3528] 8021q: adding VLAN 0 to HW filter on device batadv0
[   39.319033][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   39.327440][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   39.335570][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   39.343667][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   39.351559][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   39.359312][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   39.366875][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   39.375493][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   39.383983][ T3349] bridge0: port 2(bridge_slave_1) entered blocking state
[   39.391401][ T3349] bridge0: port 2(bridge_slave_1) entered forwarding state
[   39.399306][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   39.408498][ T3349] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   39.420532][ T3525] batman_adv: batadv0: Interface activated: batadv_slave_0
[   39.428969][ T3539] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   39.437509][ T3539] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   39.446295][ T3539] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   39.454697][ T3539] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   39.463653][ T3539] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   39.477304][ T3524] device veth0_macvtap entered promiscuous mode
[   39.489454][ T3529] device veth1_vlan entered promiscuous mode
[   39.496204][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   39.504513][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   39.513040][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   39.521848][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   39.530423][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   39.538830][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   39.546907][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   39.555465][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   39.563856][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   39.573199][ T3530] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   39.581709][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   39.590725][ T3525] batman_adv: batadv0: Interface activated: batadv_slave_1
[   39.603608][ T3524] device veth1_macvtap entered promiscuous mode
[   39.616103][ T3530] 8021q: adding VLAN 0 to HW filter on device batadv0
[   39.627133][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   39.635648][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   39.643799][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   39.652465][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   39.661509][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   39.670037][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   39.678712][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   39.686148][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   39.693619][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   39.702206][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   39.712589][ T3525] netdevsim netdevsim6 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   39.721396][ T3525] netdevsim netdevsim6 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   39.730300][ T3525] netdevsim netdevsim6 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   39.740382][ T3525] netdevsim netdevsim6 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   39.741465][ T3583] Bluetooth: hci1: command 0x041b tx timeout
[   39.757310][ T3529] device veth0_macvtap entered promiscuous mode
[   39.763674][ T3583] Bluetooth: hci2: command 0x041b tx timeout
[   39.769258][ T3524] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   39.780376][ T3524] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   39.791150][ T3524] batman_adv: batadv0: Interface activated: batadv_slave_0
[   39.799665][ T3527] device veth0_vlan entered promiscuous mode
[   39.811120][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   39.819388][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   39.827674][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   39.836067][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   39.844635][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   39.861850][ T3528] device veth0_vlan entered promiscuous mode
[   39.868987][ T3529] device veth1_macvtap entered promiscuous mode
[   39.877589][ T3529] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   39.888781][ T3529] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   39.897896][ T3349] Bluetooth: hci4: command 0x041b tx timeout
[   39.899192][ T3529] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   39.904889][ T3349] Bluetooth: hci5: command 0x041b tx timeout
[   39.915807][ T3529] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   39.921948][ T3349] Bluetooth: hci7: command 0x041b tx timeout
[   39.932591][ T3529] batman_adv: batadv0: Interface activated: batadv_slave_0
[   39.938383][ T3349] Bluetooth: hci6: command 0x041b tx timeout
[   39.946346][ T3524] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   39.962607][ T3524] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   39.973338][ T3524] batman_adv: batadv0: Interface activated: batadv_slave_1
[   39.982529][ T3524] netdevsim netdevsim0 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   39.991496][ T3524] netdevsim netdevsim0 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   40.001032][ T3524] netdevsim netdevsim0 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   40.009908][ T3524] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   40.019794][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   40.028154][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   40.035692][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   40.043436][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   40.052035][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   40.060539][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   40.068865][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   40.077140][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   40.085632][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   40.094821][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   40.103150][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   40.116883][ T3528] device veth1_vlan entered promiscuous mode
[   40.124166][ T3529] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   40.134968][ T3529] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   40.145536][ T3529] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   40.156127][ T3529] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   40.166571][ T3529] batman_adv: batadv0: Interface activated: batadv_slave_1
[   40.175252][ T3527] device veth1_vlan entered promiscuous mode
[   40.182636][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   40.190469][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   40.198164][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   40.206766][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   40.218454][ T3529] netdevsim netdevsim5 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   40.227166][ T3529] netdevsim netdevsim5 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   40.236199][ T3529] netdevsim netdevsim5 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   40.247034][ T3529] netdevsim netdevsim5 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   40.263397][ T3527] device veth0_macvtap entered promiscuous mode
[   40.285201][   T43] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   40.294384][   T43] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   40.303304][ T3528] device veth0_macvtap entered promiscuous mode
[   40.310448][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   40.318747][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   40.326873][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   40.335829][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   40.344241][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   40.353392][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   40.361838][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   40.370637][ T3527] device veth1_macvtap entered promiscuous mode
[   40.380083][ T3530] device veth0_vlan entered promiscuous mode
[   40.387650][ T3530] device veth1_vlan entered promiscuous mode
[   40.396016][   T26] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   40.404163][   T26] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   40.418458][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   40.426569][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   40.434520][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   40.443653][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   40.451898][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   40.460626][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   40.468942][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   40.478125][ T3527] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   40.490002][ T3527] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   40.500211][ T3527] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   40.511100][ T3527] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   40.521212][ T3527] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   40.532030][ T3527] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   40.544143][ T3527] batman_adv: batadv0: Interface activated: batadv_slave_0
[   40.554698][ T3528] device veth1_macvtap entered promiscuous mode
[   40.562458][   T26] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   40.569791][ T3528] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   40.570734][   T26] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   40.581267][ T3528] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   40.599393][ T3528] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   40.609915][ T3528] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   40.619883][ T3528] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   40.630904][ T3528] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   40.640965][ T3528] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   40.651710][ T3528] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   40.662129][ T3528] batman_adv: batadv0: Interface activated: batadv_slave_0
[   40.670276][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   40.678417][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   40.686008][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   40.693740][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   40.701864][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   40.710451][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   40.719250][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   40.726738][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   40.735164][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   40.747918][ T3530] device veth0_macvtap entered promiscuous mode
[   40.755726][ T3530] device veth1_macvtap entered promiscuous mode
[   40.764716][ T3527] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   40.775703][ T3527] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   40.786168][ T3527] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   40.796887][ T3527] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   40.807152][ T3527] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   40.818063][ T3527] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   40.828739][ T3527] batman_adv: batadv0: Interface activated: batadv_slave_1
[   40.837038][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   40.846881][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   40.855512][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   40.863333][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   40.871966][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   40.880519][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   40.893139][ T3528] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   40.903898][ T3528] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   40.914192][ T3528] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   40.925597][ T3528] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   40.936097][ T3528] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   40.947166][ T3528] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   40.957302][ T3528] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   40.968231][ T3528] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   40.979345][ T3528] batman_adv: batadv0: Interface activated: batadv_slave_1
[   40.987180][ T3527] netdevsim netdevsim4 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   40.996989][ T3527] netdevsim netdevsim4 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   41.005938][ T3527] netdevsim netdevsim4 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   41.014846][ T3527] netdevsim netdevsim4 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   41.028375][ T1104] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   41.029939][ T3530] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   41.038011][ T1104] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   41.047311][ T3530] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   41.065799][ T3530] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   41.076908][ T3530] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   41.086838][ T3530] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   41.098324][ T3530] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   41.108408][ T3530] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   41.119300][ T3530] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   41.130736][ T3530] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   41.141268][ T3530] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   41.151881][ T3530] batman_adv: batadv0: Interface activated: batadv_slave_0
[   41.168029][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   41.176450][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   41.185385][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   41.193234][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   41.202513][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   41.207764][ T3583] usb 7-1: new high-speed USB device number 2 using dummy_hcd
[   41.220036][ T3528] netdevsim netdevsim1 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   41.229102][ T3528] netdevsim netdevsim1 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   41.238157][ T3528] netdevsim netdevsim1 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   41.247040][ T3528] netdevsim netdevsim1 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   41.263865][ T3530] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   41.274660][ T3530] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   41.287094][ T3530] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   41.297812][ T3530] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   41.307616][ T3530] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   41.318226][ T3530] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   41.328300][ T3530] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   41.339274][ T3530] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   41.349787][ T3530] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   41.360402][ T3530] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   41.373080][ T3530] batman_adv: batadv0: Interface activated: batadv_slave_1
[   41.387114][ T3594] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   41.395670][ T3594] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   41.406189][ T3530] netdevsim netdevsim7 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   41.415022][ T3530] netdevsim netdevsim7 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   41.424748][ T3530] netdevsim netdevsim7 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   41.434353][ T3530] netdevsim netdevsim7 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   41.449411][ T1104] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   41.458254][ T1104] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   41.466195][ T3594] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   41.478690][   T26] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   41.488081][   T26] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   41.500584][ T3579] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   41.518814][   T26] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   41.527531][   T26] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   41.544647][ T3580] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   41.562492][ T1104] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   41.570568][   T26] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   41.573732][ T1104] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   41.578653][   T26] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   41.579312][   T53] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   41.597797][ T3583] usb 7-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   41.603840][ T3653] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   41.614146][ T3583] usb 7-1: New USB device found, idVendor=0926, idProduct=3333, bcdDevice= 0.40
[   41.622544][ T3653] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   41.630755][ T3583] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   41.637409][   T53] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   41.648779][ T3583] usb 7-1: config 0 descriptor??
[   41.675336][   T26] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   41.683550][   T26] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   41.683770][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   41.698929][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   41.709732][   T26] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   41.719664][   T26] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   41.727289][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   41.737851][ T3538] Bluetooth: hci0: Opcode 0x c03 failed: -110
[   41.817952][   T46] Bluetooth: hci3: Opcode 0x c03 failed: -110
[   41.818213][ T3349] Bluetooth: hci2: command 0x040f tx timeout
[   41.830537][ T3349] Bluetooth: hci1: command 0x040f tx timeout
[   41.837850][ T3577] usb 6-1: new high-speed USB device number 2 using dummy_hcd
[   41.845358][ T3579] usb 1-1: new high-speed USB device number 2 using dummy_hcd
[   41.967744][ T3575] usb 5-1: new high-speed USB device number 2 using dummy_hcd
[   41.978493][ T3349] Bluetooth: hci6: command 0x040f tx timeout
[   41.984571][ T3349] Bluetooth: hci7: command 0x040f tx timeout
[   41.991046][ T3594] usb 2-1: new high-speed USB device number 2 using dummy_hcd
[   41.998780][ T3349] Bluetooth: hci5: command 0x040f tx timeout
[   42.005307][ T3349] Bluetooth: hci4: command 0x040f tx timeout
[   42.017899][   T25] usb 8-1: new high-speed USB device number 2 using dummy_hcd
[   42.138373][ T3583] keytouch 0003:0926:3333.0001: fixing up Keytouch IEC report descriptor
[   42.150909][ T3583] input: HID 0926:3333 as /devices/platform/dummy_hcd.6/usb7/7-1/7-1:0.0/0003:0926:3333.0001/input/input5
[   42.232826][ T3583] keytouch 0003:0926:3333.0001: input,hidraw0: USB HID v0.00 Keyboard [HID 0926:3333] on usb-dummy_hcd.6-1/input0
[   42.248052][ T3579] usb 1-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   42.259418][ T3577] usb 6-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   42.270783][ T3579] usb 1-1: New USB device found, idVendor=0926, idProduct=3333, bcdDevice= 0.40
[   42.280015][ T3577] usb 6-1: New USB device found, idVendor=0926, idProduct=3333, bcdDevice= 0.40
[   42.289523][ T3579] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   42.297585][ T3577] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   42.308721][ T3579] usb 1-1: config 0 descriptor??
[   42.314155][ T3577] usb 6-1: config 0 descriptor??
[   42.357923][ T3575] usb 5-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   42.358275][ T3594] usb 2-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   42.370639][ T3575] usb 5-1: New USB device found, idVendor=0926, idProduct=3333, bcdDevice= 0.40
[   42.381016][ T3594] usb 2-1: New USB device found, idVendor=0926, idProduct=3333, bcdDevice= 0.40
[   42.389954][ T3575] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   42.399138][ T3594] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   42.408693][ T3575] usb 5-1: config 0 descriptor??
[   42.416366][ T3594] usb 2-1: config 0 descriptor??
[   42.438229][   T25] usb 8-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   42.449706][   T25] usb 8-1: New USB device found, idVendor=0926, idProduct=3333, bcdDevice= 0.40
[   42.461284][   T25] usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   42.473586][   T25] usb 8-1: config 0 descriptor??
[   42.768219][ T3579] keytouch 0003:0926:3333.0002: fixing up Keytouch IEC report descriptor
[   42.777528][ T3579] input: HID 0926:3333 as /devices/platform/dummy_hcd.0/usb1/1-1/1-1:0.0/0003:0926:3333.0002/input/input6
[   42.808204][ T3577] keytouch 0003:0926:3333.0003: fixing up Keytouch IEC report descriptor
[   42.817654][ T3577] input: HID 0926:3333 as /devices/platform/dummy_hcd.5/usb6/6-1/6-1:0.0/0003:0926:3333.0003/input/input7
[   42.861720][ T3579] keytouch 0003:0926:3333.0002: input,hidraw1: USB HID v0.00 Keyboard [HID 0926:3333] on usb-dummy_hcd.0-1/input0
[   42.898223][ T3594] keytouch 0003:0926:3333.0004: fixing up Keytouch IEC report descriptor
[   42.898420][ T3575] keytouch 0003:0926:3333.0005: fixing up Keytouch IEC report descriptor
[   42.908630][ T3594] input: HID 0926:3333 as /devices/platform/dummy_hcd.1/usb2/2-1/2-1:0.0/0003:0926:3333.0004/input/input8
[   42.919419][ T3575] input: HID 0926:3333 as /devices/platform/dummy_hcd.4/usb5/5-1/5-1:0.0/0003:0926:3333.0005/input/input9
[   42.940933][ T3577] keytouch 0003:0926:3333.0003: input,hidraw2: USB HID v0.00 Keyboard [HID 0926:3333] on usb-dummy_hcd.5-1/input0
[   42.958290][   T25] keytouch 0003:0926:3333.0006: fixing up Keytouch IEC report descriptor
[   42.972623][   T25] input: HID 0926:3333 as /devices/platform/dummy_hcd.7/usb8/8-1/8-1:0.0/0003:0926:3333.0006/input/input10
[   43.009386][ T3594] keytouch 0003:0926:3333.0004: input,hidraw3: USB HID v0.00 Keyboard [HID 0926:3333] on usb-dummy_hcd.1-1/input0
[   43.079167][ T3575] keytouch 0003:0926:3333.0005: input,hidraw4: USB HID v0.00 Keyboard [HID 0926:3333] on usb-dummy_hcd.4-1/input0
[   43.158916][   T25] keytouch 0003:0926:3333.0006: input,hidraw5: USB HID v0.00 Keyboard [HID 0926:3333] on usb-dummy_hcd.7-1/input0
[   43.180294][ T3594] usb 7-1: USB disconnect, device number 2
2024/04/16 17:19:47 executed programs: 8
[   43.879013][ T3540] usb 1-1: USB disconnect, device number 2
[   43.897937][    C1] keytouch 0003:0926:3333.0002: usb_submit_urb(ctrl) failed: -19
[   43.907243][ T3656] Bluetooth: hci1: command 0x0419 tx timeout
[   43.913935][ T3656] Bluetooth: hci2: command 0x0419 tx timeout
[   43.920519][   T44] usb 6-1: USB disconnect, device number 2
[   43.937755][    C1] keytouch 0003:0926:3333.0003: usb_submit_urb(ctrl) failed: -19
[   43.946988][ T3656] usb 2-1: USB disconnect, device number 2
[   43.947723][ T3594] usb 7-1: new high-speed USB device number 3 using dummy_hcd
[   43.960577][    C0] keytouch 0003:0926:3333.0004: usb_submit_urb(ctrl) failed: -19
[   44.010099][ T3583] usb 5-1: USB disconnect, device number 2
[   44.027740][    C1] keytouch 0003:0926:3333.0005: usb_submit_urb(ctrl) failed: -19
[   44.058463][ T3578] Bluetooth: hci4: command 0x0419 tx timeout
[   44.065195][ T3578] Bluetooth: hci5: command 0x0419 tx timeout
[   44.071708][ T3578] Bluetooth: hci7: command 0x0419 tx timeout
[   44.077959][ T3578] Bluetooth: hci6: command 0x0419 tx timeout
[   44.085048][ T3539] usb 8-1: USB disconnect, device number 2
[   44.087756][    C1] keytouch 0003:0926:3333.0006: usb_submit_urb(ctrl) failed: -19
[   44.327825][ T3594] usb 7-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   44.340912][ T3594] usb 7-1: New USB device found, idVendor=0926, idProduct=3333, bcdDevice= 0.40
[   44.350474][ T3594] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   44.359453][ T3594] usb 7-1: config 0 descriptor??
[   44.838160][ T3594] keytouch 0003:0926:3333.0007: fixing up Keytouch IEC report descriptor
[   44.847551][ T3594] input: HID 0926:3333 as /devices/platform/dummy_hcd.6/usb7/7-1/7-1:0.0/0003:0926:3333.0007/input/input11
[   44.929494][ T3594] keytouch 0003:0926:3333.0007: input,hidraw0: USB HID v0.00 Keyboard [HID 0926:3333] on usb-dummy_hcd.6-1/input0
[   45.878254][ T3578] usb 7-1: USB disconnect, device number 3
[   45.897889][   T46] Bluetooth: hci0: Opcode 0x c03 failed: -110
[   45.977912][ T3538] Bluetooth: hci3: Opcode 0x c03 failed: -110
[   50.058355][ T3538] Bluetooth: hci0: Opcode 0x c03 failed: -110
[   50.137783][   T46] Bluetooth: hci3: Opcode 0x c03 failed: -110
[   52.219924][ T3551] Bluetooth: hci3: unexpected cc 0x0c03 length: 249 > 1
[   52.227258][ T3552] Bluetooth: hci3: unexpected cc 0x1003 length: 249 > 9
[   52.234367][ T3552] Bluetooth: hci3: unexpected cc 0x1001 length: 249 > 9
[   52.241500][ T3552] Bluetooth: hci3: unexpected cc 0x0c23 length: 249 > 4
[   52.248651][ T3552] Bluetooth: hci3: unexpected cc 0x0c25 length: 249 > 3
[   52.255880][ T3552] Bluetooth: hci3: unexpected cc 0x0c38 length: 249 > 2
[   52.289187][ T3678] chnl_net:caif_netlink_parms(): no params data found
[   52.307910][ T3678] bridge0: port 1(bridge_slave_0) entered blocking state
[   52.314997][ T3678] bridge0: port 1(bridge_slave_0) entered disabled state
[   52.322568][ T3678] device bridge_slave_0 entered promiscuous mode
[   52.330311][ T3678] bridge0: port 2(bridge_slave_1) entered blocking state
[   52.337372][ T3678] bridge0: port 2(bridge_slave_1) entered disabled state
[   52.345176][ T3678] device bridge_slave_1 entered promiscuous mode
[   52.356969][ T3678] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   52.367419][ T3678] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   52.381427][ T3678] team0: Port device team_slave_0 added
[   52.387639][ T3678] team0: Port device team_slave_1 added
[   52.397842][ T3678] batman_adv: batadv0: Adding interface: batadv_slave_0
[   52.404877][ T3678] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   52.431274][ T3678] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   52.442867][ T3678] batman_adv: batadv0: Adding interface: batadv_slave_1
[   52.449921][ T3678] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   52.476511][ T3678] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   52.492318][ T3678] device hsr_slave_0 entered promiscuous mode
[   52.498676][ T3678] device hsr_slave_1 entered promiscuous mode
[   52.505071][ T3678] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   52.513092][ T3678] Cannot create hsr debugfs directory
[   52.540350][ T3678] netdevsim netdevsim2 netdevsim0: renamed from eth0
[   52.548012][ T3678] netdevsim netdevsim2 netdevsim1: renamed from eth1
[   52.555937][ T3678] netdevsim netdevsim2 netdevsim2: renamed from eth2
[   52.563772][ T3678] netdevsim netdevsim2 netdevsim3: renamed from eth3
[   52.575751][ T3678] bridge0: port 2(bridge_slave_1) entered blocking state
[   52.582907][ T3678] bridge0: port 2(bridge_slave_1) entered forwarding state
[   52.590176][ T3678] bridge0: port 1(bridge_slave_0) entered blocking state
[   52.597217][ T3678] bridge0: port 1(bridge_slave_0) entered forwarding state
[   52.615675][ T3678] 8021q: adding VLAN 0 to HW filter on device bond0
[   52.626106][ T3539] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   52.636149][ T3539] bridge0: port 1(bridge_slave_0) entered disabled state
[   52.644146][ T3539] bridge0: port 2(bridge_slave_1) entered disabled state
[   52.652007][ T3539] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
[   52.661629][ T3678] 8021q: adding VLAN 0 to HW filter on device team0
[   52.670122][ T3656] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   52.678789][ T3656] bridge0: port 1(bridge_slave_0) entered blocking state
[   52.686097][ T3656] bridge0: port 1(bridge_slave_0) entered forwarding state
[   52.700968][ T3678] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   52.711674][ T3678] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   52.724465][ T3575] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   52.732919][ T3575] bridge0: port 2(bridge_slave_1) entered blocking state
[   52.739968][ T3575] bridge0: port 2(bridge_slave_1) entered forwarding state
[   52.748429][ T3575] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   52.756651][ T3575] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   52.765096][ T3575] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   52.773280][ T3575] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   52.783501][ T3578] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   52.791264][ T3578] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   52.802380][ T3594] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   52.810234][ T3594] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   52.818828][ T3678] 8021q: adding VLAN 0 to HW filter on device batadv0
[   52.853062][ T3678] device veth0_vlan entered promiscuous mode
[   52.859845][ T3575] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   52.868637][ T3575] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   52.876646][ T3575] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   52.885108][ T3575] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   52.894879][ T3678] device veth1_vlan entered promiscuous mode
[   52.905287][ T3594] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   52.913355][ T3594] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   52.921517][ T3594] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   52.931342][ T3678] device veth0_macvtap entered promiscuous mode
[   52.939137][ T3678] device veth1_macvtap entered promiscuous mode
[   52.948503][ T3678] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   52.959130][ T3678] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.969642][ T3678] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   52.980391][ T3678] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.990848][ T3678] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   53.001662][ T3678] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.011538][ T3678] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   53.022234][ T3678] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.032496][ T3678] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   53.043339][ T3678] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.053242][ T3678] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   53.064514][ T3678] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.075662][ T3678] batman_adv: batadv0: Interface activated: batadv_slave_0
[   53.083916][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   53.093140][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   53.102004][ T3678] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   53.112852][ T3678] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.122953][ T3678] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   53.133667][ T3678] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.143654][ T3678] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   53.154184][ T3678] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.164167][ T3678] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   53.174736][ T3678] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.185049][ T3678] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   53.195861][ T3678] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.205934][ T3678] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   53.216617][ T3678] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.227558][ T3678] batman_adv: batadv0: Interface activated: batadv_slave_1
[   53.235685][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   53.245144][ T3678] netdevsim netdevsim2 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   53.254096][ T3678] netdevsim netdevsim2 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   53.264760][ T3678] netdevsim netdevsim2 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   53.273780][ T3678] netdevsim netdevsim2 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   53.297398][   T43] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   53.309060][   T43] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   53.317429][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   53.326304][ T1104] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   53.335640][ T1104] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   53.344854][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   53.627753][ T3539] usb 3-1: new high-speed USB device number 2 using dummy_hcd
[   54.027944][ T3539] usb 3-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   54.039136][ T3539] usb 3-1: New USB device found, idVendor=0926, idProduct=3333, bcdDevice= 0.40
[   54.048487][ T3539] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   54.057256][ T3539] usb 3-1: config 0 descriptor??
[   54.217746][   T46] Bluetooth: hci0: Opcode 0x c03 failed: -110
[   54.297978][ T3577] Bluetooth: hci3: command 0x0409 tx timeout
[   54.528593][ T3539] keytouch 0003:0926:3333.0008: fixing up Keytouch IEC report descriptor
[   54.537578][ T3539] input: HID 0926:3333 as /devices/platform/dummy_hcd.2/usb3/3-1/3-1:0.0/0003:0926:3333.0008/input/input12
[   54.629119][ T3539] keytouch 0003:0926:3333.0008: input,hidraw0: USB HID v0.00 Keyboard [HID 0926:3333] on usb-dummy_hcd.2-1/input0
[   55.639347][ T3594] usb 3-1: USB disconnect, device number 2
[   55.647710][    C0] keytouch 0003:0926:3333.0008: usb_submit_urb(ctrl) failed: -19
2024/04/16 17:20:00 executed programs: 14
[   56.377807][ T3594] Bluetooth: hci3: command 0x041b tx timeout
[   58.378037][   T46] Bluetooth: hci0: Opcode 0x c03 failed: -110
[   58.457996][ T3594] Bluetooth: hci3: command 0x040f tx timeout
[   60.460014][ T3552] Bluetooth: hci0: unexpected cc 0x0c03 length: 249 > 1
[   60.467406][ T3552] Bluetooth: hci0: unexpected cc 0x1003 length: 249 > 9
[   60.474634][ T3552] Bluetooth: hci0: unexpected cc 0x1001 length: 249 > 9
[   60.481955][ T3552] Bluetooth: hci0: unexpected cc 0x0c23 length: 249 > 4
[   60.489306][ T3552] Bluetooth: hci0: unexpected cc 0x0c25 length: 249 > 3
[   60.496537][ T3552] Bluetooth: hci0: unexpected cc 0x0c38 length: 249 > 2
[   60.531058][ T3695] chnl_net:caif_netlink_parms(): no params data found
[   60.537890][ T3577] Bluetooth: hci3: command 0x0419 tx timeout
[   60.552088][ T3695] bridge0: port 1(bridge_slave_0) entered blocking state
[   60.559280][ T3695] bridge0: port 1(bridge_slave_0) entered disabled state
[   60.567146][ T3695] device bridge_slave_0 entered promiscuous mode
[   60.575391][ T3695] bridge0: port 2(bridge_slave_1) entered blocking state
[   60.583139][ T3695] bridge0: port 2(bridge_slave_1) entered disabled state
[   60.591112][ T3695] device bridge_slave_1 entered promiscuous mode
[   60.602492][ T3695] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   60.613235][ T3695] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   60.628278][ T3695] team0: Port device team_slave_0 added
[   60.634420][ T3695] team0: Port device team_slave_1 added
[   60.645003][ T3695] batman_adv: batadv0: Adding interface: batadv_slave_0
[   60.652269][ T3695] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   60.678888][ T3695] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   60.690274][ T3695] batman_adv: batadv0: Adding interface: batadv_slave_1
[   60.697298][ T3695] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   60.724459][ T3695] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   60.740472][ T3695] device hsr_slave_0 entered promiscuous mode
[   60.746767][ T3695] device hsr_slave_1 entered promiscuous mode
[   60.753501][ T3695] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   60.761122][ T3695] Cannot create hsr debugfs directory
[   60.789851][ T3695] netdevsim netdevsim3 netdevsim0: renamed from eth0
[   60.797411][ T3695] netdevsim netdevsim3 netdevsim1: renamed from eth1
[   60.805151][ T3695] netdevsim netdevsim3 netdevsim2: renamed from eth2
[   60.813675][ T3695] netdevsim netdevsim3 netdevsim3: renamed from eth3
[   60.824620][ T3695] bridge0: port 2(bridge_slave_1) entered blocking state
[   60.831691][ T3695] bridge0: port 2(bridge_slave_1) entered forwarding state
[   60.838930][ T3695] bridge0: port 1(bridge_slave_0) entered blocking state
[   60.846404][ T3695] bridge0: port 1(bridge_slave_0) entered forwarding state
[   60.864228][ T3695] 8021q: adding VLAN 0 to HW filter on device bond0
[   60.874173][ T3539] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   60.882364][ T3539] bridge0: port 1(bridge_slave_0) entered disabled state
[   60.890582][ T3539] bridge0: port 2(bridge_slave_1) entered disabled state
[   60.898377][ T3539] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
[   60.907625][ T3695] 8021q: adding VLAN 0 to HW filter on device team0
[   60.916187][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   60.924733][ T3577] bridge0: port 1(bridge_slave_0) entered blocking state
[   60.931777][ T3577] bridge0: port 1(bridge_slave_0) entered forwarding state
[   60.947266][ T3695] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   60.959971][ T3695] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   60.971802][ T3539] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   60.980368][ T3539] bridge0: port 2(bridge_slave_1) entered blocking state
[   60.987750][ T3539] bridge0: port 2(bridge_slave_1) entered forwarding state
[   60.995803][ T3539] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   61.004612][ T3539] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   61.013015][ T3539] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   61.022031][ T3539] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   61.030393][ T3539] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   61.038048][ T3539] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   61.050522][ T3695] 8021q: adding VLAN 0 to HW filter on device batadv0
[   61.058446][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   61.065951][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   61.104014][ T3695] device veth0_vlan entered promiscuous mode
[   61.111149][ T3539] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   61.120970][ T3539] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   61.129279][ T3539] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   61.136798][ T3539] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   61.146263][ T3695] device veth1_vlan entered promiscuous mode
[   61.156595][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   61.164933][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   61.173284][   T25] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   61.183636][ T3695] device veth0_macvtap entered promiscuous mode
[   61.192403][ T3695] device veth1_macvtap entered promiscuous mode
[   61.202139][ T3695] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   61.213022][ T3695] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   61.224704][ T3695] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   61.235992][ T3695] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   61.246623][ T3695] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   61.257201][ T3695] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   61.267761][ T3695] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   61.278233][ T3695] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   61.288345][ T3695] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   61.298959][ T3695] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   61.308911][ T3695] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   61.319898][ T3695] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   61.329797][ T3695] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3d) already exists on: batadv_slave_0
[   61.342862][ T3695] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   61.353684][ T3695] batman_adv: batadv0: Interface activated: batadv_slave_0
[   61.361578][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   61.370983][ T3583] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   61.379994][ T3695] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   61.390849][ T3695] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   61.400901][ T3695] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   61.411658][ T3695] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   61.421819][ T3695] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   61.432346][ T3695] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   61.442318][ T3695] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   61.453036][ T3695] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   61.462991][ T3695] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   61.475448][ T3695] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   61.485693][ T3695] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   61.496838][ T3695] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   61.506873][ T3695] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_1
[   61.517592][ T3695] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   61.528817][ T3695] batman_adv: batadv0: Interface activated: batadv_slave_1
[   61.537967][ T3539] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   61.547379][ T3695] netdevsim netdevsim3 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   61.557890][ T3695] netdevsim netdevsim3 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   61.567329][ T3695] netdevsim netdevsim3 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   61.576626][ T3695] netdevsim netdevsim3 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   61.601811][   T53] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   61.610372][   T53] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   61.618245][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   61.627398][   T53] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   61.636379][   T53] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   61.644247][ T3577] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   61.927794][ T3577] usb 4-1: new high-speed USB device number 2 using dummy_hcd
[   62.288322][ T3577] usb 4-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   62.299285][ T3577] usb 4-1: New USB device found, idVendor=0926, idProduct=3333, bcdDevice= 0.40
[   62.308994][ T3577] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   62.319135][ T3577] usb 4-1: config 0 descriptor??
[   62.548121][ T3539] Bluetooth: hci0: command 0x0409 tx timeout
[   62.798169][ T3577] keytouch 0003:0926:3333.0009: fixing up Keytouch IEC report descriptor
[   62.807124][ T3577] input: HID 0926:3333 as /devices/platform/dummy_hcd.3/usb4/4-1/4-1:0.0/0003:0926:3333.0009/input/input13
[   62.889004][ T3577] keytouch 0003:0926:3333.0009: input,hidraw0: USB HID v0.00 Keyboard [HID 0926:3333] on usb-dummy_hcd.3-1/input0
[   63.840621][ T3577] usb 4-1: USB disconnect, device number 2
2024/04/16 17:20:08 executed programs: 15
[   64.617826][ T3539] Bluetooth: hci0: command 0x041b tx timeout
[   66.192110][ T3709] kmemleak: 4 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
[   66.698502][ T3583] Bluetooth: hci0: command 0x040f tx timeout
[   68.777790][ T3583] Bluetooth: hci0: command 0x0419 tx timeout
[   69.899625][ T1233] ieee802154 phy0 wpan0: encryption failed: -22
[   69.905931][ T1233] ieee802154 phy1 wpan1: encryption failed: -22
[   69.913506][  T140] cfg80211: failed to load regulatory.db
[   71.112020][ T3709] kmemleak: 123 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
BUG: memory leak
unreferenced object 0xffff88811781bd80 (size 32):
  comm "softirq", pid 0, jiffies 4294941502 (age 31.900s)
  hex dump (first 32 bytes):
    64 f3 c6 6a d1 88 07 04 00 00 00 00 00 00 00 00  d..j............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff814c2c00>] kmemdup+0x20/0x50
    [<ffffffff83578276>] hidraw_report_event+0xa6/0x150
    [<ffffffff8356a069>] hid_report_raw_event+0x249/0x6f0
    [<ffffffff8356a709>] hid_input_report+0x1f9/0x290
    [<ffffffff835ed11e>] hid_irq_in+0x1fe/0x240
    [<ffffffff82d4771e>] __usb_hcd_giveback_urb+0x13e/0x220
    [<ffffffff82d479a8>] usb_hcd_giveback_urb+0x1a8/0x1c0
    [<ffffffff82ef969a>] dummy_timer+0x90a/0x1560
    [<ffffffff81310549>] call_timer_fn+0x39/0x200
    [<ffffffff81310a2d>] __run_timers.part.0+0x31d/0x420
    [<ffffffff81310b74>] run_timer_softirq+0x44/0x90
    [<ffffffff848000ee>] __do_softirq+0xee/0x2fe
    [<ffffffff812575bc>] irq_exit_rcu+0xac/0x110
    [<ffffffff84585cce>] sysvec_apic_timer_interrupt+0x9e/0xc0
    [<ffffffff84600cc6>] asm_sysvec_apic_timer_interrupt+0x16/0x20
    [<ffffffff8459a822>] acpi_idle_do_entry+0xb2/0xd0

BUG: memory leak
unreferenced object 0xffff88811781bd00 (size 32):
  comm "softirq", pid 0, jiffies 4294941504 (age 31.880s)
  hex dump (first 32 bytes):
    27 1a e8 41 4f c2 fd 8c 00 00 00 00 00 00 00 00  '..AO...........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff814c2c00>] kmemdup+0x20/0x50
    [<ffffffff83578276>] hidraw_report_event+0xa6/0x150
    [<ffffffff8356a069>] hid_report_raw_event+0x249/0x6f0
    [<ffffffff8356a709>] hid_input_report+0x1f9/0x290
    [<ffffffff835ed11e>] hid_irq_in+0x1fe/0x240
    [<ffffffff82d4771e>] __usb_hcd_giveback_urb+0x13e/0x220
    [<ffffffff82d479a8>] usb_hcd_giveback_urb+0x1a8/0x1c0
    [<ffffffff82ef969a>] dummy_timer+0x90a/0x1560
    [<ffffffff81310549>] call_timer_fn+0x39/0x200
    [<ffffffff81310a2d>] __run_timers.part.0+0x31d/0x420
    [<ffffffff81310b74>] run_timer_softirq+0x44/0x90
    [<ffffffff848000ee>] __do_softirq+0xee/0x2fe
    [<ffffffff812572a1>] run_ksoftirqd+0x21/0x30
    [<ffffffff81292357>] smpboot_thread_fn+0x267/0x360
    [<ffffffff8128914f>] kthread+0x11f/0x160
    [<ffffffff810021df>] ret_from_fork+0x1f/0x30

BUG: memory leak
unreferenced object 0xffff88811750e080 (size 32):
  comm "softirq", pid 0, jiffies 4294941506 (age 31.860s)
  hex dump (first 32 bytes):
    5e 2d ce 49 18 07 8e f1 00 00 00 00 00 00 00 00  ^-.I............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff814c2c00>] kmemdup+0x20/0x50
    [<ffffffff83578276>] hidraw_report_event+0xa6/0x150
    [<ffffffff8356a069>] hid_report_raw_event+0x249/0x6f0
    [<ffffffff8356a709>] hid_input_report+0x1f9/0x290
    [<ffffffff835ed11e>] hid_irq_in+0x1fe/0x240
    [<ffffffff82d4771e>] __usb_hcd_giveback_urb+0x13e/0x220
    [<ffffffff82d479a8>] usb_hcd_giveback_urb+0x1a8/0x1c0
    [<ffffffff82ef969a>] dummy_timer+0x90a/0x1560
    [<ffffffff81310549>] call_timer_fn+0x39/0x200
    [<ffffffff81310a2d>] __run_timers.part.0+0x31d/0x420
    [<ffffffff81310b74>] run_timer_softirq+0x44/0x90
    [<ffffffff848000ee>] __do_softirq+0xee/0x2fe
    [<ffffffff812572a1>] run_ksoftirqd+0x21/0x30
    [<ffffffff81292357>] smpboot_thread_fn+0x267/0x360
    [<ffffffff8128914f>] kthread+0x11f/0x160
    [<ffffffff810021df>] ret_from_fork+0x1f/0x30

