Warning: Permanently added '10.128.0.32' (ED25519) to the list of known hosts.
2024/04/16 16:51:15 ignoring optional flag "sandboxArg"="0"
2024/04/16 16:51:15 parsed 1 programs
[   49.324385][ T3516] cgroup: Unknown subsys name 'net'
[   49.436493][ T3516] cgroup: Unknown subsys name 'rlimit'
2024/04/16 16:51:15 executed programs: 0
[   50.759310][ T3546] Bluetooth: hci0: unexpected cc 0x0c03 length: 249 > 1
[   50.768762][ T3549] Bluetooth: hci0: unexpected cc 0x1003 length: 249 > 9
[   50.769428][ T3550] Bluetooth: hci1: unexpected cc 0x0c03 length: 249 > 1
[   50.777599][ T3549] Bluetooth: hci0: unexpected cc 0x1001 length: 249 > 9
[   50.784335][ T3550] Bluetooth: hci1: unexpected cc 0x1003 length: 249 > 9
[   50.791386][ T3549] Bluetooth: hci0: unexpected cc 0x0c23 length: 249 > 4
[   50.797952][ T3550] Bluetooth: hci1: unexpected cc 0x1001 length: 249 > 9
[   50.805142][ T3549] Bluetooth: hci0: unexpected cc 0x0c25 length: 249 > 3
[   50.812032][ T3550] Bluetooth: hci1: unexpected cc 0x0c23 length: 249 > 4
[   50.818674][ T3549] Bluetooth: hci0: unexpected cc 0x0c38 length: 249 > 2
[   50.825801][ T3550] Bluetooth: hci1: unexpected cc 0x0c25 length: 249 > 3
[   50.839411][   T48] Bluetooth: hci1: unexpected cc 0x0c38 length: 249 > 2
[   50.887112][ T3559] Bluetooth: hci4: unexpected cc 0x0c03 length: 249 > 1
[   50.895546][ T3559] Bluetooth: hci3: unexpected cc 0x0c03 length: 249 > 1
[   50.905486][ T3559] Bluetooth: hci5: unexpected cc 0x0c03 length: 249 > 1
[   50.914009][ T3559] Bluetooth: hci6: unexpected cc 0x0c03 length: 249 > 1
[   50.914669][ T3546] Bluetooth: hci7: unexpected cc 0x0c03 length: 249 > 1
[   50.923970][ T3559] Bluetooth: hci5: unexpected cc 0x1003 length: 249 > 9
[   50.929280][ T3546] Bluetooth: hci6: unexpected cc 0x1003 length: 249 > 9
[   50.942832][ T3559] Bluetooth: hci3: unexpected cc 0x1003 length: 249 > 9
[   50.944003][ T3546] Bluetooth: hci4: unexpected cc 0x1003 length: 249 > 9
[   50.958015][ T3546] Bluetooth: hci5: unexpected cc 0x1001 length: 249 > 9
[   50.958252][ T3559] Bluetooth: hci7: unexpected cc 0x1003 length: 249 > 9
[   50.965725][ T3546] Bluetooth: hci3: unexpected cc 0x1001 length: 249 > 9
[   50.974657][ T3559] Bluetooth: hci6: unexpected cc 0x1001 length: 249 > 9
[   50.986677][ T3546] Bluetooth: hci4: unexpected cc 0x1001 length: 249 > 9
[   50.987666][ T3559] Bluetooth: hci7: unexpected cc 0x1001 length: 249 > 9
[   51.002926][ T3546] Bluetooth: hci6: unexpected cc 0x0c23 length: 249 > 4
[   51.003558][ T3559] Bluetooth: hci3: unexpected cc 0x0c23 length: 249 > 4
[   51.010147][ T3546] Bluetooth: hci5: unexpected cc 0x0c23 length: 249 > 4
[   51.018028][ T3559] Bluetooth: hci4: unexpected cc 0x0c23 length: 249 > 4
[   51.032396][ T3546] Bluetooth: hci7: unexpected cc 0x0c23 length: 249 > 4
[   51.032527][ T3560] Bluetooth: hci6: unexpected cc 0x0c25 length: 249 > 3
[   51.046724][ T3546] Bluetooth: hci4: unexpected cc 0x0c25 length: 249 > 3
[   51.047618][ T3560] Bluetooth: hci5: unexpected cc 0x0c25 length: 249 > 3
[   51.054094][ T3559] Bluetooth: hci3: unexpected cc 0x0c25 length: 249 > 3
[   51.064656][ T3560] Bluetooth: hci4: unexpected cc 0x0c38 length: 249 > 2
[   51.068385][ T3546] Bluetooth: hci6: unexpected cc 0x0c38 length: 249 > 2
[   51.075647][ T3560] Bluetooth: hci5: unexpected cc 0x0c38 length: 249 > 2
[   51.081969][ T3546] Bluetooth: hci7: unexpected cc 0x0c25 length: 249 > 3
[   51.098700][ T3561] Bluetooth: hci3: unexpected cc 0x0c38 length: 249 > 2
[   51.110913][ T3544] Bluetooth: hci7: unexpected cc 0x0c38 length: 249 > 2
[   51.354651][ T3537] chnl_net:caif_netlink_parms(): no params data found
[   51.628597][ T3539] chnl_net:caif_netlink_parms(): no params data found
[   51.642135][ T3537] bridge0: port 1(bridge_slave_0) entered blocking state
[   51.649227][ T3537] bridge0: port 1(bridge_slave_0) entered disabled state
[   51.658573][ T3537] device bridge_slave_0 entered promiscuous mode
[   51.684996][ T3535] chnl_net:caif_netlink_parms(): no params data found
[   51.717584][ T3537] bridge0: port 2(bridge_slave_1) entered blocking state
[   51.724944][ T3537] bridge0: port 2(bridge_slave_1) entered disabled state
[   51.733032][ T3537] device bridge_slave_1 entered promiscuous mode
[   51.741225][ T3543] chnl_net:caif_netlink_parms(): no params data found
[   51.763154][ T3542] chnl_net:caif_netlink_parms(): no params data found
[   51.843766][ T3537] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   51.889171][ T3538] chnl_net:caif_netlink_parms(): no params data found
[   51.899262][ T3537] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   51.925204][ T3539] bridge0: port 1(bridge_slave_0) entered blocking state
[   51.932524][ T3539] bridge0: port 1(bridge_slave_0) entered disabled state
[   51.940967][ T3539] device bridge_slave_0 entered promiscuous mode
[   51.984083][ T3537] team0: Port device team_slave_0 added
[   51.990522][ T3539] bridge0: port 2(bridge_slave_1) entered blocking state
[   51.997625][ T3539] bridge0: port 2(bridge_slave_1) entered disabled state
[   52.006602][ T3539] device bridge_slave_1 entered promiscuous mode
[   52.036205][ T3537] team0: Port device team_slave_1 added
[   52.092843][ T3541] chnl_net:caif_netlink_parms(): no params data found
[   52.121200][ T3535] bridge0: port 1(bridge_slave_0) entered blocking state
[   52.128308][ T3535] bridge0: port 1(bridge_slave_0) entered disabled state
[   52.136412][ T3535] device bridge_slave_0 entered promiscuous mode
[   52.154452][ T3539] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   52.166670][ T3542] bridge0: port 1(bridge_slave_0) entered blocking state
[   52.174115][ T3542] bridge0: port 1(bridge_slave_0) entered disabled state
[   52.182733][ T3542] device bridge_slave_0 entered promiscuous mode
[   52.190992][ T3543] bridge0: port 1(bridge_slave_0) entered blocking state
[   52.198095][ T3543] bridge0: port 1(bridge_slave_0) entered disabled state
[   52.206250][ T3543] device bridge_slave_0 entered promiscuous mode
[   52.223213][ T3535] bridge0: port 2(bridge_slave_1) entered blocking state
[   52.230488][ T3535] bridge0: port 2(bridge_slave_1) entered disabled state
[   52.238252][ T3535] device bridge_slave_1 entered promiscuous mode
[   52.246167][ T3537] batman_adv: batadv0: Adding interface: batadv_slave_0
[   52.253349][ T3537] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   52.279850][ T3537] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   52.293133][ T3539] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   52.307869][ T3542] bridge0: port 2(bridge_slave_1) entered blocking state
[   52.315103][ T3542] bridge0: port 2(bridge_slave_1) entered disabled state
[   52.323737][ T3542] device bridge_slave_1 entered promiscuous mode
[   52.330969][ T3543] bridge0: port 2(bridge_slave_1) entered blocking state
[   52.338055][ T3543] bridge0: port 2(bridge_slave_1) entered disabled state
[   52.346470][ T3543] device bridge_slave_1 entered promiscuous mode
[   52.387008][ T3537] batman_adv: batadv0: Adding interface: batadv_slave_1
[   52.394257][ T3537] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   52.420725][ T3537] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   52.477138][ T3538] bridge0: port 1(bridge_slave_0) entered blocking state
[   52.484465][ T3538] bridge0: port 1(bridge_slave_0) entered disabled state
[   52.492513][ T3538] device bridge_slave_0 entered promiscuous mode
[   52.541843][ T3539] team0: Port device team_slave_0 added
[   52.558954][ T3543] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   52.568509][ T3538] bridge0: port 2(bridge_slave_1) entered blocking state
[   52.576042][ T3538] bridge0: port 2(bridge_slave_1) entered disabled state
[   52.584671][ T3538] device bridge_slave_1 entered promiscuous mode
[   52.593633][ T3535] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   52.606751][ T3537] device hsr_slave_0 entered promiscuous mode
[   52.613843][ T3537] device hsr_slave_1 entered promiscuous mode
[   52.626295][ T3539] team0: Port device team_slave_1 added
[   52.634294][ T3542] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   52.645384][ T3543] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   52.671070][ T3535] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   52.694773][ T3542] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   52.724046][ T3538] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   52.772693][ T3543] team0: Port device team_slave_0 added
[   52.780131][ T3538] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   52.807114][ T3539] batman_adv: batadv0: Adding interface: batadv_slave_0
[   52.814192][ T3539] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   52.840256][ T3539] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   52.860697][ T3543] team0: Port device team_slave_1 added
[   52.879229][ T3541] bridge0: port 1(bridge_slave_0) entered blocking state
[   52.887432][ T3541] bridge0: port 1(bridge_slave_0) entered disabled state
[   52.895638][ T3541] device bridge_slave_0 entered promiscuous mode
[   52.907637][ T3535] team0: Port device team_slave_0 added
[   52.914581][   T48] Bluetooth: hci2: Opcode 0x c03 failed: -110
[   52.925119][ T3547] Bluetooth: hci0: command 0x0409 tx timeout
[   52.945137][ T3539] batman_adv: batadv0: Adding interface: batadv_slave_1
[   52.952317][ T3539] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   52.978567][ T3539] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   52.996438][ T3542] team0: Port device team_slave_0 added
[   53.002464][  T922] Bluetooth: hci1: command 0x0409 tx timeout
[   53.027341][ T3541] bridge0: port 2(bridge_slave_1) entered blocking state
[   53.034729][ T3541] bridge0: port 2(bridge_slave_1) entered disabled state
[   53.043452][ T3541] device bridge_slave_1 entered promiscuous mode
[   53.052024][ T3535] team0: Port device team_slave_1 added
[   53.075728][ T3542] team0: Port device team_slave_1 added
[   53.101028][ T3538] team0: Port device team_slave_0 added
[   53.126434][ T3541] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   53.143173][ T3543] batman_adv: batadv0: Adding interface: batadv_slave_0
[   53.151461][   T14] Bluetooth: hci3: command 0x0409 tx timeout
[   53.151790][ T3547] Bluetooth: hci7: command 0x0409 tx timeout
[   53.157669][   T14] Bluetooth: hci5: command 0x0409 tx timeout
[   53.163742][ T3543] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   53.195955][ T3543] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   53.205246][   T14] Bluetooth: hci6: command 0x0409 tx timeout
[   53.208967][ T3543] batman_adv: batadv0: Adding interface: batadv_slave_1
[   53.216923][   T14] Bluetooth: hci4: command 0x0409 tx timeout
[   53.219611][ T3543] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   53.252106][ T3543] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   53.272510][ T3538] team0: Port device team_slave_1 added
[   53.292822][ T3541] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   53.314183][ T3542] batman_adv: batadv0: Adding interface: batadv_slave_0
[   53.321402][ T3542] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   53.347921][ T3542] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   53.369019][ T3535] batman_adv: batadv0: Adding interface: batadv_slave_0
[   53.376807][ T3535] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   53.403437][ T3535] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   53.417813][ T3539] device hsr_slave_0 entered promiscuous mode
[   53.424810][ T3539] device hsr_slave_1 entered promiscuous mode
[   53.431638][ T3539] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   53.439525][ T3539] Cannot create hsr debugfs directory
[   53.468600][ T3542] batman_adv: batadv0: Adding interface: batadv_slave_1
[   53.475836][ T3542] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   53.501825][ T3542] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   53.532217][ T3535] batman_adv: batadv0: Adding interface: batadv_slave_1
[   53.539228][ T3535] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   53.565181][ T3535] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   53.602848][ T3538] batman_adv: batadv0: Adding interface: batadv_slave_0
[   53.609989][ T3538] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   53.636452][ T3538] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   53.661931][ T3541] team0: Port device team_slave_0 added
[   53.671994][ T3541] team0: Port device team_slave_1 added
[   53.688100][ T3543] device hsr_slave_0 entered promiscuous mode
[   53.695118][ T3543] device hsr_slave_1 entered promiscuous mode
[   53.704570][ T3543] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   53.712507][ T3543] Cannot create hsr debugfs directory
[   53.729255][ T3538] batman_adv: batadv0: Adding interface: batadv_slave_1
[   53.736338][ T3538] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   53.762951][ T3538] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   53.820352][ T3535] device hsr_slave_0 entered promiscuous mode
[   53.827336][ T3535] device hsr_slave_1 entered promiscuous mode
[   53.834402][ T3535] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   53.842230][ T3535] Cannot create hsr debugfs directory
[   53.856130][ T3541] batman_adv: batadv0: Adding interface: batadv_slave_0
[   53.864411][ T3541] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   53.892173][ T3541] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   53.943741][ T3541] batman_adv: batadv0: Adding interface: batadv_slave_1
[   53.954523][ T3541] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   53.991172][ T3541] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   54.030412][ T3542] device hsr_slave_0 entered promiscuous mode
[   54.037390][ T3542] device hsr_slave_1 entered promiscuous mode
[   54.044710][ T3542] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   54.052690][ T3542] Cannot create hsr debugfs directory
[   54.183099][ T3538] device hsr_slave_0 entered promiscuous mode
[   54.190044][ T3538] device hsr_slave_1 entered promiscuous mode
[   54.209944][ T3538] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   54.217542][ T3538] Cannot create hsr debugfs directory
[   54.315193][ T3541] device hsr_slave_0 entered promiscuous mode
[   54.322413][ T3541] device hsr_slave_1 entered promiscuous mode
[   54.328966][ T3541] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   54.337003][ T3541] Cannot create hsr debugfs directory
[   54.496076][ T3537] netdevsim netdevsim3 netdevsim0: renamed from eth0
[   54.514896][ T3537] netdevsim netdevsim3 netdevsim1: renamed from eth1
[   54.563658][ T3537] netdevsim netdevsim3 netdevsim2: renamed from eth2
[   54.577158][ T3537] netdevsim netdevsim3 netdevsim3: renamed from eth3
[   54.734107][ T3535] netdevsim netdevsim1 netdevsim0: renamed from eth0
[   54.755863][ T3535] netdevsim netdevsim1 netdevsim1: renamed from eth1
[   54.780900][ T3535] netdevsim netdevsim1 netdevsim2: renamed from eth2
[   54.792752][ T3535] netdevsim netdevsim1 netdevsim3: renamed from eth3
[   54.836346][ T3539] netdevsim netdevsim5 netdevsim0: renamed from eth0
[   54.845640][ T3539] netdevsim netdevsim5 netdevsim1: renamed from eth1
[   54.871536][ T3539] netdevsim netdevsim5 netdevsim2: renamed from eth2
[   54.881452][ T3539] netdevsim netdevsim5 netdevsim3: renamed from eth3
[   54.945246][ T3537] 8021q: adding VLAN 0 to HW filter on device bond0
[   54.990386][ T3598] Bluetooth: hci0: command 0x041b tx timeout
[   54.999058][ T3535] 8021q: adding VLAN 0 to HW filter on device bond0
[   55.014842][ T3537] 8021q: adding VLAN 0 to HW filter on device team0
[   55.023207][ T3543] netdevsim netdevsim2 netdevsim0: renamed from eth0
[   55.044293][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   55.056104][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   55.064678][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   55.078318][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   55.097962][ T3603] Bluetooth: hci1: command 0x041b tx timeout
[   55.105757][ T3535] 8021q: adding VLAN 0 to HW filter on device team0
[   55.116944][ T3543] netdevsim netdevsim2 netdevsim1: renamed from eth1
[   55.160862][ T3543] netdevsim netdevsim2 netdevsim2: renamed from eth2
[   55.172606][ T3551] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   55.188145][ T3551] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   55.199736][ T3551] bridge0: port 1(bridge_slave_0) entered blocking state
[   55.207100][ T3551] bridge0: port 1(bridge_slave_0) entered forwarding state
[   55.226098][ T3551] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   55.238993][ T3551] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   55.240157][ T3603] Bluetooth: hci6: command 0x041b tx timeout
[   55.253697][ T3603] Bluetooth: hci5: command 0x041b tx timeout
[   55.256964][ T3551] bridge0: port 2(bridge_slave_1) entered blocking state
[   55.260549][ T3603] Bluetooth: hci7: command 0x041b tx timeout
[   55.266904][ T3551] bridge0: port 2(bridge_slave_1) entered forwarding state
[   55.273440][ T3603] Bluetooth: hci3: command 0x041b tx timeout
[   55.289255][ T3551] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   55.298729][ T3551] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   55.310391][ T3603] Bluetooth: hci4: command 0x041b tx timeout
[   55.320261][ T3551] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   55.328762][ T3551] bridge0: port 1(bridge_slave_0) entered blocking state
[   55.335920][ T3551] bridge0: port 1(bridge_slave_0) entered forwarding state
[   55.385313][ T3543] netdevsim netdevsim2 netdevsim3: renamed from eth3
[   55.398110][ T3602] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   55.407505][ T3602] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   55.416621][ T3602] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   55.425493][ T3602] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   55.434412][ T3602] bridge0: port 2(bridge_slave_1) entered blocking state
[   55.441560][ T3602] bridge0: port 2(bridge_slave_1) entered forwarding state
[   55.449426][ T3602] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   55.458813][ T3602] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   55.467874][ T3602] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   55.478496][ T3602] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   55.488715][ T3602] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   55.540380][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   55.548550][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   55.561594][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   55.570782][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   55.579779][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   55.589217][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   55.598208][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   55.606970][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   55.615901][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   55.624535][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   55.633878][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   55.643188][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   55.667060][ T3538] netdevsim netdevsim0 netdevsim0: renamed from eth0
[   55.695273][ T3538] netdevsim netdevsim0 netdevsim1: renamed from eth1
[   55.710562][ T3602] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   55.718915][ T3602] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   55.732069][ T3539] 8021q: adding VLAN 0 to HW filter on device bond0
[   55.747390][ T3602] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   55.756149][ T3602] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   55.768520][ T3538] netdevsim netdevsim0 netdevsim2: renamed from eth2
[   55.797347][ T3538] netdevsim netdevsim0 netdevsim3: renamed from eth3
[   55.809760][ T3535] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   55.845851][ T3539] 8021q: adding VLAN 0 to HW filter on device team0
[   55.879367][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   55.900575][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   55.960431][ T3602] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   55.969363][ T3602] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   55.988007][ T3602] bridge0: port 1(bridge_slave_0) entered blocking state
[   55.995488][ T3602] bridge0: port 1(bridge_slave_0) entered forwarding state
[   56.047954][ T3542] netdevsim netdevsim6 netdevsim0: renamed from eth0
[   56.085395][    T6] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   56.094697][    T6] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   56.104515][    T6] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   56.114083][    T6] bridge0: port 2(bridge_slave_1) entered blocking state
[   56.121290][    T6] bridge0: port 2(bridge_slave_1) entered forwarding state
[   56.129486][    T6] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   56.138989][    T6] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   56.148705][    T6] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   56.158269][    T6] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   56.171435][ T3543] 8021q: adding VLAN 0 to HW filter on device bond0
[   56.186450][ T3542] netdevsim netdevsim6 netdevsim1: renamed from eth1
[   56.241378][ T3535] 8021q: adding VLAN 0 to HW filter on device batadv0
[   56.258546][ T3609] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   56.269732][ T3609] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   56.278600][ T3609] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   56.286483][ T3609] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   56.296241][ T3609] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   56.306065][ T3609] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   56.315493][ T3609] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   56.324678][ T3609] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   56.334340][ T3609] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   56.343164][ T3609] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   56.352258][ T3609] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   56.362548][ T3542] netdevsim netdevsim6 netdevsim2: renamed from eth2
[   56.378555][ T3542] netdevsim netdevsim6 netdevsim3: renamed from eth3
[   56.408719][ T3537] 8021q: adding VLAN 0 to HW filter on device batadv0
[   56.434435][ T3539] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   56.476823][ T3604] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   56.485065][ T3604] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   56.494818][ T3604] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   56.504021][ T3604] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   56.515792][ T3541] netdevsim netdevsim7 netdevsim0: renamed from eth0
[   56.570897][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   56.579680][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   56.603834][ T3543] 8021q: adding VLAN 0 to HW filter on device team0
[   56.618726][ T3541] netdevsim netdevsim7 netdevsim1: renamed from eth1
[   56.637722][ T3541] netdevsim netdevsim7 netdevsim2: renamed from eth2
[   56.653918][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   56.663599][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   56.673483][ T3598] bridge0: port 1(bridge_slave_0) entered blocking state
[   56.680653][ T3598] bridge0: port 1(bridge_slave_0) entered forwarding state
[   56.689791][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   56.712360][ T3541] netdevsim netdevsim7 netdevsim3: renamed from eth3
[   56.744999][ T3538] 8021q: adding VLAN 0 to HW filter on device bond0
[   56.767416][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   56.777191][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   56.785942][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   56.796269][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   56.805395][  T922] bridge0: port 2(bridge_slave_1) entered blocking state
[   56.812860][  T922] bridge0: port 2(bridge_slave_1) entered forwarding state
[   56.821463][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   56.829337][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   56.839023][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   56.847441][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   56.883979][ T3535] device veth0_vlan entered promiscuous mode
[   56.904140][ T3539] 8021q: adding VLAN 0 to HW filter on device batadv0
[   56.917583][   T26] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   56.927251][   T26] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   56.936917][   T26] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   56.948360][   T26] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   56.957131][   T26] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   56.965950][   T26] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   56.974440][   T26] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   56.990315][    T6] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   57.013422][    T6] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   57.027869][    T6] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   57.045189][ T3537] device veth0_vlan entered promiscuous mode
[   57.078475][ T3538] 8021q: adding VLAN 0 to HW filter on device team0
[   57.080031][ T3598] Bluetooth: hci0: command 0x040f tx timeout
[   57.092633][    T6] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   57.107256][ T3535] device veth1_vlan entered promiscuous mode
[   57.129600][ T3537] device veth1_vlan entered promiscuous mode
[   57.157719][    T6] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   57.165409][   T48] Bluetooth: hci2: Opcode 0x c03 failed: -110
[   57.187075][    T6] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   57.195702][    T6] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   57.205425][    T6] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   57.215141][    T6] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   57.224321][    T6] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   57.233804][    T6] bridge0: port 1(bridge_slave_0) entered blocking state
[   57.240975][    T6] bridge0: port 1(bridge_slave_0) entered forwarding state
[   57.256375][ T3542] 8021q: adding VLAN 0 to HW filter on device bond0
[   57.264182][    T6] Bluetooth: hci1: command 0x040f tx timeout
[   57.279481][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   57.288107][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   57.297622][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   57.307143][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   57.316364][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   57.320840][  T922] Bluetooth: hci3: command 0x040f tx timeout
[   57.330974][  T922] Bluetooth: hci7: command 0x040f tx timeout
[   57.335253][ T3613] Bluetooth: hci6: command 0x040f tx timeout
[   57.349752][ T3543] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   57.366639][  T922] Bluetooth: hci5: command 0x040f tx timeout
[   57.401657][ T3603] Bluetooth: hci4: command 0x040f tx timeout
[   57.439087][ T3542] 8021q: adding VLAN 0 to HW filter on device team0
[   57.447328][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   57.461259][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   57.471411][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   57.480270][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   57.488891][  T922] bridge0: port 2(bridge_slave_1) entered blocking state
[   57.496056][  T922] bridge0: port 2(bridge_slave_1) entered forwarding state
[   57.503958][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   57.512987][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   57.522092][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   57.531576][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   57.540699][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   57.549353][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   57.558509][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   57.567236][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   57.579268][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   57.611520][ T3537] device veth0_macvtap entered promiscuous mode
[   57.626957][ T3538] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   57.638971][ T3538] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   57.660937][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   57.669408][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   57.679035][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   57.688495][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   57.702476][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   57.711853][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   57.721833][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   57.731778][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   57.740888][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   57.749629][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   57.758294][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   57.771291][ T3535] device veth0_macvtap entered promiscuous mode
[   57.783323][   T26] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   57.792221][   T26] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   57.800552][   T26] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   57.810150][   T26] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   57.820889][   T26] bridge0: port 1(bridge_slave_0) entered blocking state
[   57.828268][   T26] bridge0: port 1(bridge_slave_0) entered forwarding state
[   57.839138][ T3537] device veth1_macvtap entered promiscuous mode
[   57.887340][ T3541] 8021q: adding VLAN 0 to HW filter on device bond0
[   57.903457][ T3535] device veth1_macvtap entered promiscuous mode
[   57.926880][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   57.935782][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   57.945154][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   57.955502][ T3598] bridge0: port 2(bridge_slave_1) entered blocking state
[   57.962740][ T3598] bridge0: port 2(bridge_slave_1) entered forwarding state
[   57.971324][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   57.980050][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   57.988904][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   57.998476][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   58.028045][ T3542] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   58.038778][ T3542] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   58.066132][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   58.081677][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   58.111265][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   58.123844][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   58.133746][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   58.142958][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   58.152679][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   58.177783][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   58.209571][ T3543] 8021q: adding VLAN 0 to HW filter on device batadv0
[   58.226279][ T3537] batman_adv: batadv0: Interface activated: batadv_slave_0
[   58.264775][ T3539] device veth0_vlan entered promiscuous mode
[   58.290281][ T3603] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   58.297859][ T3603] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   58.306994][ T3603] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   58.316439][ T3603] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   58.325346][ T3603] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   58.334576][ T3603] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   58.345179][ T3603] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   58.353540][ T3603] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   58.367033][ T3541] 8021q: adding VLAN 0 to HW filter on device team0
[   58.380125][ T3535] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   58.391192][ T3535] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.403351][ T3535] batman_adv: batadv0: Interface activated: batadv_slave_0
[   58.413219][ T3537] batman_adv: batadv0: Interface activated: batadv_slave_1
[   58.426399][ T3537] netdevsim netdevsim3 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   58.436791][ T3537] netdevsim netdevsim3 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   58.446287][ T3537] netdevsim netdevsim3 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   58.455254][ T3537] netdevsim netdevsim3 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   58.479026][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   58.487190][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   58.495131][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   58.504446][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   58.513569][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   58.522918][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   58.541494][ T3535] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   58.554676][ T3535] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.566304][ T3535] batman_adv: batadv0: Interface activated: batadv_slave_1
[   58.589141][ T3539] device veth1_vlan entered promiscuous mode
[   58.611998][ T3617] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   58.622277][ T3617] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   58.634755][ T3617] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   58.643059][ T3617] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   58.652535][ T3617] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   58.661739][ T3617] bridge0: port 1(bridge_slave_0) entered blocking state
[   58.669011][ T3617] bridge0: port 1(bridge_slave_0) entered forwarding state
[   58.677071][ T3617] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   58.686065][ T3617] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   58.695149][ T3617] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   58.702798][ T3617] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   58.711102][ T3617] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   58.720465][ T3617] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   58.729327][ T3617] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   58.738439][ T3617] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   58.746941][ T3617] bridge0: port 2(bridge_slave_1) entered blocking state
[   58.754292][ T3617] bridge0: port 2(bridge_slave_1) entered forwarding state
[   58.765282][ T3535] netdevsim netdevsim1 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   58.775135][ T3535] netdevsim netdevsim1 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   58.790167][ T3535] netdevsim netdevsim1 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   58.798937][ T3535] netdevsim netdevsim1 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   58.824969][ T3538] 8021q: adding VLAN 0 to HW filter on device batadv0
[   58.840612][ T3551] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   58.850429][ T3551] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   58.858660][ T3551] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   58.867377][ T3551] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   58.876512][ T3551] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   58.914824][ T3543] device veth0_vlan entered promiscuous mode
[   58.928237][ T3551] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   58.937092][ T3551] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   58.953180][ T3542] 8021q: adding VLAN 0 to HW filter on device batadv0
[   58.976350][ T3539] device veth0_macvtap entered promiscuous mode
[   59.016294][ T3603] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   59.039449][ T3603] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   59.048605][ T3603] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   59.057376][ T3603] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   59.089026][ T3541] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   59.110441][ T3541] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   59.134044][ T3543] device veth1_vlan entered promiscuous mode
[   59.143940][ T3629] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   59.153233][ T3629] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   59.162183][ T3629] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   59.171424][ T3629] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   59.181517][ T3629] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   59.190910][ T3629] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   59.199766][ T3629] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   59.208794][ T3629] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   59.218373][ T3629] Bluetooth: hci0: command 0x0419 tx timeout
[   59.230103][ T3539] device veth1_macvtap entered promiscuous mode
[   59.290902][ T3629] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   59.299107][ T3629] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   59.330624][ T3629] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   59.339440][ T3629] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   59.351568][ T3560] Bluetooth: hci2: unexpected cc 0x0c03 length: 249 > 1
[   59.360596][ T3560] Bluetooth: hci2: unexpected cc 0x1003 length: 249 > 9
[   59.369187][ T3560] Bluetooth: hci2: unexpected cc 0x1001 length: 249 > 9
[   59.378027][ T3560] Bluetooth: hci2: unexpected cc 0x0c23 length: 249 > 4
[   59.386559][ T3629] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   59.394794][ T3560] Bluetooth: hci2: unexpected cc 0x0c25 length: 249 > 3
[   59.403016][ T3560] Bluetooth: hci2: unexpected cc 0x0c38 length: 249 > 2
[   59.421642][ T3629] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   59.430560][ T3629] Bluetooth: hci1: command 0x0419 tx timeout
[   59.432563][ T3543] device veth0_macvtap entered promiscuous mode
[   59.453153][ T3629] Bluetooth: hci7: command 0x0419 tx timeout
[   59.459374][ T3629] Bluetooth: hci6: command 0x0419 tx timeout
[   59.466096][ T3629] Bluetooth: hci3: command 0x0419 tx timeout
[   59.473367][ T3547] Bluetooth: hci4: command 0x0419 tx timeout
[   59.479697][ T3547] Bluetooth: hci5: command 0x0419 tx timeout
[   59.496522][ T3539] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   59.516582][ T3654] loop1: detected capacity change from 0 to 1024
[   59.523893][ T3539] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   59.534408][ T3539] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   59.547506][ T3656] loop3: detected capacity change from 0 to 1024
[   59.554473][ T3539] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   59.570390][ T3539] batman_adv: batadv0: Interface activated: batadv_slave_0
[   59.619623][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   59.634324][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   59.642867][ T3656] EXT4-fs (loop3): mounted filesystem without journal. Quota mode: writeback.
[   59.654706][   T27] audit: type=1804 audit(1713286286.012:2): pid=3660 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.1" name="/root/syzkaller-testdir1062981863/syzkaller.u6qaBt/0/bus" dev="sda1" ino=1957 res=1 errno=0
[   59.679670][ T3654] EXT4-fs (loop1): mounted filesystem without journal. Quota mode: writeback.
[   59.705730][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   59.715043][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   59.731042][   T27] audit: type=1804 audit(1713286286.052:3): pid=3656 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.3" name="/root/syzkaller-testdir2990492561/syzkaller.OAW3h1/0/file0/bus" dev="loop3" ino=18 res=1 errno=0
[   59.768003][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   59.779702][ T3538] device veth0_vlan entered promiscuous mode
[   59.798239][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   59.810564][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   59.826155][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   59.836528][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   59.863212][ T3543] device veth1_macvtap entered promiscuous mode
2024/04/16 16:51:26 executed programs: 8
[   59.875130][ T3539] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   59.887130][ T3539] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   59.898536][ T3539] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   59.911420][ T3539] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   59.927547][ T3539] batman_adv: batadv0: Interface activated: batadv_slave_1
[   59.946606][ T3538] device veth1_vlan entered promiscuous mode
[   59.950606][ T3537] EXT4-fs (loop3): unmounting filesystem.
[   59.972424][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   59.984517][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   59.994019][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   60.003093][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   60.011114][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   60.019920][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   60.072555][ T3539] netdevsim netdevsim5 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   60.104424][ T3539] netdevsim netdevsim5 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   60.109777][ T3667] loop3: detected capacity change from 0 to 1024
[   60.126157][ T3539] netdevsim netdevsim5 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   60.136340][ T3539] netdevsim netdevsim5 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   60.164266][ T3542] device veth0_vlan entered promiscuous mode
[   60.175076][ T3551] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   60.182346][ T3667] EXT4-fs (loop3): mounted filesystem without journal. Quota mode: writeback.
[   60.185300][ T3551] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   60.202303][ T3551] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   60.213936][   T27] audit: type=1804 audit(1713286286.572:4): pid=3669 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.3" name="/root/syzkaller-testdir2990492561/syzkaller.OAW3h1/1/bus" dev="sda1" ino=1958 res=1 errno=0
[   60.249630][ T3551] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   60.263605][ T3543] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   60.279353][ T3543] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   60.289670][ T3543] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   60.306257][ T3543] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   60.316680][ T3543] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   60.327744][ T3543] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   60.342364][ T3543] batman_adv: batadv0: Interface activated: batadv_slave_0
[   60.360976][ T3535] EXT4-fs (loop1): unmounting filesystem.
[   60.372898][ T3541] 8021q: adding VLAN 0 to HW filter on device batadv0
[   60.416572][ T3671] loop1: detected capacity change from 0 to 1024
[   60.419578][ T3542] device veth1_vlan entered promiscuous mode
[   60.449286][ T3671] EXT4-fs (loop1): mounted filesystem without journal. Quota mode: writeback.
[   60.462074][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   60.472950][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   60.484284][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   60.493738][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   60.502970][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   60.516540][ T3543] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   60.548301][ T3543] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   60.561343][   T27] audit: type=1804 audit(1713286286.902:5): pid=3671 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.1" name="/root/syzkaller-testdir1062981863/syzkaller.u6qaBt/1/file0/bus" dev="loop1" ino=18 res=1 errno=0
[   60.565057][ T3543] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   60.601542][ T3543] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   60.614501][ T3543] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   60.627770][ T3543] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   60.643873][ T3543] batman_adv: batadv0: Interface activated: batadv_slave_1
[   60.659698][ T3538] device veth0_macvtap entered promiscuous mode
[   60.677347][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   60.688993][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   60.715601][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   60.756817][ T3543] netdevsim netdevsim2 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   60.783210][ T3543] netdevsim netdevsim2 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   60.806004][ T3543] netdevsim netdevsim2 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   60.836409][ T3543] netdevsim netdevsim2 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   60.884065][ T3538] device veth1_macvtap entered promiscuous mode
[   60.933176][ T3609] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   60.947285][ T3609] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   60.968212][ T3609] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   60.983687][ T3609] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   61.007388][ T3537] EXT4-fs (loop3): unmounting filesystem.
[   61.015356][ T3535] EXT4-fs (loop1): unmounting filesystem.
[   61.032045][ T3538] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   61.073484][ T3682] loop1: detected capacity change from 0 to 1024
[   61.082286][ T3538] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   61.092943][ T3538] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   61.127707][ T3682] EXT4-fs (loop1): mounted filesystem without journal. Quota mode: writeback.
[   61.142564][ T3685] loop3: detected capacity change from 0 to 1024
[   61.148802][ T3538] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   61.162587][ T3538] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   61.175915][ T3538] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   61.186615][ T3538] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   61.203266][   T27] audit: type=1804 audit(1713286287.562:6): pid=3682 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.1" name="/root/syzkaller-testdir1062981863/syzkaller.u6qaBt/2/file0/bus" dev="loop1" ino=18 res=1 errno=0
[   61.203951][ T3685] EXT4-fs (loop3): mounted filesystem without journal. Quota mode: writeback.
[   61.233587][ T3538] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   61.273931][ T3538] batman_adv: batadv0: Interface activated: batadv_slave_0
[   61.281507][   T27] audit: type=1804 audit(1713286287.632:7): pid=3685 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.3" name="/root/syzkaller-testdir2990492561/syzkaller.OAW3h1/2/file0/bus" dev="loop3" ino=18 res=1 errno=0
[   61.348195][ T3542] device veth0_macvtap entered promiscuous mode
[   61.371830][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   61.386844][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   61.404174][ T3538] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   61.427535][ T3538] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   61.441871][ T3690] loop5: detected capacity change from 0 to 1024
[   61.447495][ T3538] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   61.467451][ T3538] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   61.478911][ T3538] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   61.479019][   T14] Bluetooth: hci2: command 0x0409 tx timeout
[   61.490967][ T3538] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   61.500009][ T3690] EXT4-fs (loop5): mounted filesystem without journal. Quota mode: writeback.
[   61.506648][ T3538] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   61.528278][ T3538] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   61.538658][   T27] audit: type=1804 audit(1713286287.892:8): pid=3690 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.5" name="/root/syzkaller-testdir4170142998/syzkaller.1QaWYO/0/file0/bus" dev="loop5" ino=18 res=1 errno=0
[   61.554839][ T3538] batman_adv: batadv0: Interface activated: batadv_slave_1
[   61.579509][ T3535] EXT4-fs (loop1): unmounting filesystem.
[   61.585992][ T3537] EXT4-fs (loop3): unmounting filesystem.
[   61.633185][ T3542] device veth1_macvtap entered promiscuous mode
[   61.680465][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   61.691901][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   61.719085][ T3538] netdevsim netdevsim0 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   61.750550][ T3695] loop3: detected capacity change from 0 to 1024
[   61.755820][ T3538] netdevsim netdevsim0 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   61.777612][ T3697] loop1: detected capacity change from 0 to 1024
[   61.782378][ T3538] netdevsim netdevsim0 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   61.798291][ T3695] EXT4-fs (loop3): mounted filesystem without journal. Quota mode: writeback.
[   61.810030][ T3538] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   61.826055][   T27] audit: type=1804 audit(1713286288.182:9): pid=3695 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.3" name="/root/syzkaller-testdir2990492561/syzkaller.OAW3h1/3/file0/bus" dev="loop3" ino=18 res=1 errno=0
[   61.838127][ T3697] EXT4-fs (loop1): mounted filesystem without journal. Quota mode: writeback.
[   61.886889][ T3539] EXT4-fs (loop5): unmounting filesystem.
[   61.897214][   T27] audit: type=1804 audit(1713286288.222:10): pid=3697 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.1" name="/root/syzkaller-testdir1062981863/syzkaller.u6qaBt/3/file0/bus" dev="loop1" ino=18 res=1 errno=0
[   61.999873][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   62.026297][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   62.042338][ T3703] loop5: detected capacity change from 0 to 1024
[   62.072758][ T3542] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   62.103789][ T3542] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   62.117423][ T3542] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   62.122562][ T3703] EXT4-fs (loop5): mounted filesystem without journal. Quota mode: writeback.
[   62.128090][ T3542] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   62.147833][ T3542] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   62.158651][ T3542] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   62.169028][ T3542] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   62.182601][ T3542] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   62.193381][ T3542] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   62.205696][ T3542] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   62.217714][ T3542] batman_adv: batadv0: Interface activated: batadv_slave_0
[   62.243166][ T3642] chnl_net:caif_netlink_parms(): no params data found
[   62.267936][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   62.277362][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   62.282779][ T3535] EXT4-fs (loop1): unmounting filesystem.
[   62.316323][   T27] audit: type=1804 audit(1713286288.662:11): pid=3707 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=ToMToU comm="syz-executor.5" name="/root/syzkaller-testdir4170142998/syzkaller.1QaWYO/1/file0/bus" dev="loop5" ino=18 res=1 errno=0
[   62.347268][ T3541] device veth0_vlan entered promiscuous mode
[   62.363411][ T3710] loop2: detected capacity change from 0 to 1024
[   62.372233][ T3520] I/O error, dev loop2, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   62.379158][ T3537] EXT4-fs (loop3): unmounting filesystem.
[   62.392593][ T3542] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   62.421128][ T3542] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   62.433173][ T3520] Buffer I/O error on dev loop2, logical block 0, async page read
[   62.455572][ T3542] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   62.482408][ T3520]  loop2: unable to read partition table
[   62.513010][ T3717] loop1: detected capacity change from 0 to 1024
[   62.516670][ T3710] EXT4-fs (loop2): mounted filesystem without journal. Quota mode: writeback.
[   62.523177][ T3517] I/O error, dev loop1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   62.533326][ T3716] loop3: detected capacity change from 0 to 1024
[   62.538689][ T3711] I/O error, dev loop3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   62.552372][ T3517] Buffer I/O error on dev loop1, logical block 0, async page read
[   62.553258][ T3711] Buffer I/O error on dev loop3, logical block 0, async page read
[   62.569227][ T3711] I/O error, dev loop3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   62.573480][ T3542] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   62.580487][ T3711] Buffer I/O error on dev loop3, logical block 0, async page read
[   62.601261][ T3711] I/O error, dev loop3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   62.610248][ T3517]  loop1: unable to read partition table
[   62.610896][ T3711] Buffer I/O error on dev loop3, logical block 0, async page read
[   62.625917][ T3711] I/O error, dev loop3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   62.635546][ T3711] Buffer I/O error on dev loop3, logical block 0, async page read
[   62.644575][ T3711] I/O error, dev loop3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   62.654864][ T3711] Buffer I/O error on dev loop3, logical block 0, async page read
[   62.665078][ T3711]  loop3: unable to read partition table
[   62.672445][ T3542] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   62.712454][ T3542] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   62.731573][ T3717] EXT4-fs (loop1): mounted filesystem without journal. Quota mode: writeback.
[   62.756974][ T3542] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   62.778410][ T3542] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   62.798375][ T3542] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   62.811211][ T3542] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   62.828661][ T3539] EXT4-fs (loop5): unmounting filesystem.
[   62.835134][ T3542] batman_adv: batadv0: Interface activated: batadv_slave_1
[   62.874743][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   62.896022][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   62.907841][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   62.918473][ T2987] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   62.931416][ T3542] netdevsim netdevsim6 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   62.964480][ T3542] netdevsim netdevsim6 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   62.979937][ T3542] netdevsim netdevsim6 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   63.001786][ T3542] netdevsim netdevsim6 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   63.041569][ T3541] device veth1_vlan entered promiscuous mode
[   63.050477][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   63.059530][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   63.069539][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   63.191093][ T3543] EXT4-fs (loop2): unmounting filesystem.
[   63.199701][ T3728] loop0: detected capacity change from 0 to 1024
[   63.271094][ T3601] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   63.296458][ T3728] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: writeback.
[   63.308528][ T3601] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   63.360990][ T3541] device veth0_macvtap entered promiscuous mode
[   63.394942][ T3535] EXT4-fs (loop1): unmounting filesystem.
[   63.421338][ T3642] bridge0: port 1(bridge_slave_0) entered blocking state
[   63.438969][ T3642] bridge0: port 1(bridge_slave_0) entered disabled state
[   63.455097][ T3642] device bridge_slave_0 entered promiscuous mode
[   63.515959][ T3541] device veth1_macvtap entered promiscuous mode
[   63.555958][ T3613] Bluetooth: hci2: command 0x041b tx timeout
[   63.563790][ T3642] bridge0: port 2(bridge_slave_1) entered blocking state
[   63.584081][ T3642] bridge0: port 2(bridge_slave_1) entered disabled state
[   63.586118][ T3734] loop6: detected capacity change from 0 to 1024
[   63.608112][ T3642] device bridge_slave_1 entered promiscuous mode
[   63.613408][ T3734] EXT4-fs (loop6): mounted filesystem without journal. Quota mode: writeback.
[   63.656867][ T3541] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   63.674971][ T3541] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   63.686289][ T3541] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   63.697690][ T3541] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   63.708712][ T3541] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   63.721572][ T3541] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   63.732599][ T3541] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   63.743836][ T3541] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   63.754685][ T3541] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   63.766395][ T3541] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   63.777006][ T3541] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   63.791800][ T3541] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   63.804467][ T3541] batman_adv: batadv0: Interface activated: batadv_slave_0
[   63.830913][    T6] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   63.844108][    T6] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   63.853995][    T6] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   63.863082][    T6] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   63.882494][ T3541] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   63.907220][ T3541] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   63.917976][ T3541] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   63.934771][ T3541] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   63.944748][ T3541] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   63.967966][ T3541] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   63.985769][ T3541] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   63.997916][ T3541] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   64.020247][ T3738] loop5: detected capacity change from 0 to 1024
[   64.020322][ T3541] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   64.039653][ T3541] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   64.052158][ T3541] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   64.068624][ T3541] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   64.077280][ T3738] EXT4-fs (loop5): mounted filesystem without journal. Quota mode: writeback.
[   64.080939][ T3541] batman_adv: batadv0: Interface activated: batadv_slave_1
[   64.092896][ T3542] EXT4-fs (loop6): unmounting filesystem.
[   64.098565][ T3642] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   64.104399][ T3538] EXT4-fs (loop0): unmounting filesystem.
[   64.114162][ T3642] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   64.135841][    T6] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   64.157592][    T6] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   64.172147][ T3541] netdevsim netdevsim7 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   64.191497][ T3541] netdevsim netdevsim7 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   64.202359][ T3541] netdevsim netdevsim7 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   64.211462][ T3541] netdevsim netdevsim7 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   64.297405][ T3743] loop0: detected capacity change from 0 to 1024
[   64.324061][ T3743] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: writeback.
[   64.373398][ T3642] team0: Port device team_slave_0 added
[   64.435758][ T3539] EXT4-fs (loop5): unmounting filesystem.
[   64.436076][ T3642] team0: Port device team_slave_1 added
[   64.570543][ T3642] batman_adv: batadv0: Adding interface: batadv_slave_0
[   64.577590][ T3642] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   64.602559][ T3538] EXT4-fs (loop0): unmounting filesystem.
[   64.620710][ T3642] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   64.626899][ T3747] loop7: detected capacity change from 0 to 1024
[   64.678243][ T3747] EXT4-fs (loop7): mounted filesystem without journal. Quota mode: writeback.
[   64.679258][ T3642] batman_adv: batadv0: Adding interface: batadv_slave_1
[   64.705625][ T3642] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   64.733421][ T3642] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   64.735114][   T27] kauditd_printk_skb: 8 callbacks suppressed
[   64.735127][   T27] audit: type=1804 audit(1713286291.092:20): pid=3747 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.7" name="/root/syzkaller-testdir3255321565/syzkaller.KLBqn9/0/file0/bus" dev="loop7" ino=18 res=1 errno=0
[   64.796010][ T3642] device hsr_slave_0 entered promiscuous mode
[   64.804201][ T3642] device hsr_slave_1 entered promiscuous mode
[   64.812424][ T3642] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   64.820865][ T3642] Cannot create hsr debugfs directory
2024/04/16 16:51:31 executed programs: 25
[   64.944558][ T3541] EXT4-fs (loop7): unmounting filesystem.
[   65.024742][ T3642] netdevsim netdevsim4 netdevsim0: renamed from eth0
[   65.034012][ T3642] netdevsim netdevsim4 netdevsim1: renamed from eth1
[   65.045693][ T3642] netdevsim netdevsim4 netdevsim2: renamed from eth2
[   65.055047][ T3642] netdevsim netdevsim4 netdevsim3: renamed from eth3
[   65.129585][ T3642] 8021q: adding VLAN 0 to HW filter on device bond0
[   65.155783][ T3645] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   65.165425][ T3645] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   65.176975][ T3642] 8021q: adding VLAN 0 to HW filter on device team0
[   65.189965][ T3645] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   65.198687][ T3645] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   65.207429][ T3645] bridge0: port 1(bridge_slave_0) entered blocking state
[   65.214558][ T3645] bridge0: port 1(bridge_slave_0) entered forwarding state
[   65.224069][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   65.242165][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   65.251365][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   65.264518][ T3614] bridge0: port 2(bridge_slave_1) entered blocking state
[   65.271978][ T3614] bridge0: port 2(bridge_slave_1) entered forwarding state
[   65.280463][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   65.289432][ T3614] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   65.305755][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   65.315880][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   65.333390][ T3642] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   65.345809][ T3642] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   65.359058][ T3645] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   65.367266][ T3645] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   65.376634][ T3645] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   65.385765][ T3645] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   65.395227][ T3645] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   65.404404][ T3645] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   65.413136][ T3645] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   65.425694][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   65.523956][ T3642] 8021q: adding VLAN 0 to HW filter on device batadv0
[   65.531697][ T3613] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   65.539363][ T3613] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   65.632493][ T3613] Bluetooth: hci2: command 0x040f tx timeout
[   65.663573][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   65.673679][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   65.694175][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   65.704285][   T22] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   65.716443][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   65.724985][  T922] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   65.736594][ T3642] device veth0_vlan entered promiscuous mode
[   65.758027][ T3642] device veth1_vlan entered promiscuous mode
[   65.785599][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   65.794663][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   65.803997][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   65.813879][   T14] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   65.825069][ T3642] device veth0_macvtap entered promiscuous mode
[   65.837461][ T3642] device veth1_macvtap entered promiscuous mode
[   65.856552][ T3642] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   65.867304][ T3642] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   65.878609][ T3642] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   65.889582][ T3642] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   65.900303][ T3642] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   65.911274][ T3642] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   65.927626][ T3642] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   65.938665][ T3642] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   65.949241][ T3642] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   65.961577][ T3642] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   65.971962][ T3642] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   65.982480][ T3642] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   65.994970][ T3642] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   66.005972][ T3642] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   66.022807][ T3642] batman_adv: batadv0: Interface activated: batadv_slave_0
[   66.033366][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   66.042671][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   66.051291][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   66.062942][ T3598] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   66.079701][ T3642] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   66.091879][ T3642] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   66.102003][ T3642] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   66.116824][ T3642] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   66.129996][ T3642] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   66.141458][ T3642] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   66.152906][ T3642] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   66.164877][ T3642] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   66.175889][ T3642] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   66.187239][ T3642] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   66.199000][ T3642] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   66.210359][ T3642] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   66.222429][ T3642] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   66.233255][ T3642] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   66.246611][ T3642] batman_adv: batadv0: Interface activated: batadv_slave_1
[   66.258244][ T3601] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   66.268178][ T3601] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   66.281225][ T3642] netdevsim netdevsim4 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   66.292603][ T3642] netdevsim netdevsim4 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   66.308046][ T3642] netdevsim netdevsim4 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   66.318430][ T3642] netdevsim netdevsim4 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   66.395295][ T3761] loop4: detected capacity change from 0 to 1024
[   66.401608][ T3517] I/O error, dev loop4, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   66.413175][ T3517] Buffer I/O error on dev loop4, logical block 0, async page read
[   66.424434][ T3517]  loop4: unable to read partition table
[   66.444483][ T3761] EXT4-fs (loop4): mounted filesystem without journal. Quota mode: writeback.
[   66.475531][   T27] audit: type=1804 audit(1713286292.832:21): pid=3761 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.4" name="/root/syzkaller-testdir3222067680/syzkaller.EJSZM1/0/file0/bus" dev="loop4" ino=18 res=1 errno=0
[   66.581906][ T3771] loop2: detected capacity change from 0 to 1024
[   66.585997][ T3773] loop1: detected capacity change from 0 to 1024
[   66.595544][ T3642] EXT4-fs (loop4): unmounting filesystem.
[   66.621803][ T3775] loop3: detected capacity change from 0 to 1024
[   66.628210][ T3778] loop5: detected capacity change from 0 to 1024
[   66.638385][ T3772] loop6: detected capacity change from 0 to 1024
[   66.639338][ T3777] loop7: detected capacity change from 0 to 1024
[   66.646541][ T3776] loop0: detected capacity change from 0 to 1024
[   66.669216][ T3771] EXT4-fs (loop2): mounted filesystem without journal. Quota mode: writeback.
[   66.694949][   T27] audit: type=1804 audit(1713286293.052:22): pid=3779 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.6" name="/root/syzkaller-testdir3286176162/syzkaller.J1X8FP/1/bus" dev="sda1" ino=1988 res=1 errno=0
[   66.736251][ T3772] EXT4-fs (loop6): mounted filesystem without journal. Quota mode: writeback.
[   66.746233][   T27] audit: type=1804 audit(1713286293.082:23): pid=3783 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.1" name="/root/syzkaller-testdir1062981863/syzkaller.u6qaBt/5/bus" dev="sda1" ino=1955 res=1 errno=0
[   66.826231][ T3776] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: writeback.
[   66.836428][   T27] audit: type=1804 audit(1713286293.082:24): pid=3786 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.0" name="/root/syzkaller-testdir3788737077/syzkaller.P4XkA3/2/bus" dev="sda1" ino=1957 res=1 errno=0
[   66.869048][   T27] audit: type=1804 audit(1713286293.092:25): pid=3789 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.5" name="/root/syzkaller-testdir4170142998/syzkaller.1QaWYO/3/bus" dev="sda1" ino=1990 res=1 errno=0
[   66.872846][ T3777] EXT4-fs (loop7): mounted filesystem without journal. Quota mode: writeback.
[   66.900241][   T27] audit: type=1804 audit(1713286293.152:26): pid=3791 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.3" name="/root/syzkaller-testdir2990492561/syzkaller.OAW3h1/5/bus" dev="sda1" ino=1992 res=1 errno=0
[   66.934179][ T3799] loop4: detected capacity change from 0 to 1024
[   66.941582][   T27] audit: type=1804 audit(1713286293.172:27): pid=3771 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.2" name="/root/syzkaller-testdir3292336804/syzkaller.i6osI5/1/file0/bus" dev="loop2" ino=18 res=1 errno=0
[   66.942406][ T3778] EXT4-fs (loop5): mounted filesystem without journal. Quota mode: writeback.
[   66.972910][   T27] audit: type=1804 audit(1713286293.182:28): pid=3794 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.7" name="/root/syzkaller-testdir3255321565/syzkaller.KLBqn9/1/bus" dev="sda1" ino=1997 res=1 errno=0
[   67.003233][ T3773] EXT4-fs (loop1): mounted filesystem without journal. Quota mode: writeback.
[   67.025107][ T3775] EXT4-fs (loop3): mounted filesystem without journal. Quota mode: writeback.
[   67.166050][ T3799] EXT4-fs (loop4): mounted filesystem without journal. Quota mode: writeback.
[   67.219404][   T27] audit: type=1804 audit(1713286293.362:29): pid=3787 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=ToMToU comm="syz-executor.7" name="/root/syzkaller-testdir3255321565/syzkaller.KLBqn9/1/bus" dev="sda1" ino=1997 res=1 errno=0
[   67.250216][ T3541] EXT4-fs (loop7): unmounting filesystem.
[   67.423326][ T3808] loop7: detected capacity change from 0 to 1024
[   67.444957][ T3537] EXT4-fs (loop3): unmounting filesystem.
[   67.476090][ T3543] EXT4-fs (loop2): unmounting filesystem.
[   67.489453][ T3542] EXT4-fs (loop6): unmounting filesystem.
[   67.502226][ T3535] EXT4-fs (loop1): unmounting filesystem.
[   67.514391][ T3808] EXT4-fs (loop7): mounted filesystem without journal. Quota mode: writeback.
[   67.528845][ T3538] EXT4-fs (loop0): unmounting filesystem.
[   67.612369][ T3539] EXT4-fs (loop5): unmounting filesystem.
[   67.695356][ T3815] loop3: detected capacity change from 0 to 1024
[   67.715141][ T2987] Bluetooth: hci2: command 0x0419 tx timeout
[   67.735592][ T3817] loop0: detected capacity change from 0 to 1024
[   67.737734][ T3642] EXT4-fs (loop4): unmounting filesystem.
[   67.781410][ T3820] loop6: detected capacity change from 0 to 1024
[   67.797999][ T3822] loop1: detected capacity change from 0 to 1024
[   67.807204][ T3823] loop2: detected capacity change from 0 to 1024
[   67.808451][ T3520] I/O error, dev loop1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   67.872761][ T3830] loop5: detected capacity change from 0 to 1024
[   67.883742][ T3520] Buffer I/O error on dev loop1, logical block 0, async page read
[   67.895829][ T3520]  loop1: unable to read partition table
[   67.914040][ T3817] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: writeback.
[   67.934791][ T3820] EXT4-fs (loop6): mounted filesystem without journal. Quota mode: writeback.
[   67.947138][ T3815] EXT4-fs (loop3): mounted filesystem without journal. Quota mode: writeback.
[   68.013594][ T3823] EXT4-fs (loop2): mounted filesystem without journal. Quota mode: writeback.
[   68.024868][ T3822] EXT4-fs (loop1): mounted filesystem without journal. Quota mode: writeback.
[   68.042663][ T3830] EXT4-fs (loop5): mounted filesystem without journal. Quota mode: writeback.
[   68.047192][ T3844] loop4: detected capacity change from 0 to 1024
[   68.162088][ T3844] EXT4-fs (loop4): mounted filesystem without journal. Quota mode: writeback.
[   68.339216][ T3541] EXT4-fs (loop7): unmounting filesystem.
[   68.541674][ T3537] EXT4-fs (loop3): unmounting filesystem.
[   68.566870][ T3850] loop7: detected capacity change from 0 to 1024
[   68.596179][ T3538] EXT4-fs (loop0): unmounting filesystem.
[   68.635678][ T3542] EXT4-fs (loop6): unmounting filesystem.
[   68.732832][ T3857] loop0: detected capacity change from 0 to 1024
[   68.766759][ T3856] loop3: detected capacity change from 0 to 1024
[   68.779127][ T3860] loop1: detected capacity change from 0 to 1024
[   68.795278][ T3862] loop6: detected capacity change from 0 to 1024
[   68.828625][ T3865] loop2: detected capacity change from 0 to 1024
[   68.860223][ T3870] loop5: detected capacity change from 0 to 1024
[   68.883687][ T2972] I/O error, dev loop2, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   68.895038][ T2972] Buffer I/O error on dev loop2, logical block 0, async page read
[   68.903998][ T2972] I/O error, dev loop2, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   68.914899][ T2972] Buffer I/O error on dev loop2, logical block 0, async page read
[   68.927439][ T2972] I/O error, dev loop2, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   68.937206][ T2972] Buffer I/O error on dev loop2, logical block 0, async page read
[   68.945661][ T2972] I/O error, dev loop2, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   68.955882][ T2972] Buffer I/O error on dev loop2, logical block 0, async page read
[   68.967101][ T2972] I/O error, dev loop2, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   68.978134][ T2972] Buffer I/O error on dev loop2, logical block 0, async page read
[   68.989373][ T2972] I/O error, dev loop2, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   69.000776][ T2972] Buffer I/O error on dev loop2, logical block 0, async page read
[   69.009436][ T2972] I/O error, dev loop2, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   69.019582][ T2972] Buffer I/O error on dev loop2, logical block 0, async page read
[   69.033784][ T2972] I/O error, dev loop2, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   69.045956][ T2972] Buffer I/O error on dev loop2, logical block 0, async page read
[   69.054873][ T2972] ldm_validate_partition_table(): Disk read failed.
[   69.079612][ T2972]  loop2: unable to read partition table
[   69.153323][ T3882] loop4: detected capacity change from 0 to 1024
[   69.296242][ T3885] loop2: detected capacity change from 0 to 1024
[   69.584388][ T3890] loop7: detected capacity change from 0 to 1024
[   69.624054][ T2972] I/O error, dev loop7, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   69.670210][ T2972] Buffer I/O error on dev loop7, logical block 0, async page read
[   69.752568][ T2972]  loop7: unable to read partition table
[   69.763477][ T3893] loop0: detected capacity change from 0 to 1024
[   69.812578][ T3896] loop3: detected capacity change from 0 to 1024
[   69.848883][ T3901] loop6: detected capacity change from 0 to 1024
[   69.858157][   T27] kauditd_printk_skb: 18 callbacks suppressed
[   69.858171][   T27] audit: type=1804 audit(1713286296.222:48): pid=3893 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.0" name="/root/syzkaller-testdir3788737077/syzkaller.P4XkA3/5/file0/bus" dev="loop0" ino=18 res=1 errno=0
[   69.871317][ T3902] loop1: detected capacity change from 0 to 1024
[   69.959569][ T3909] loop5: detected capacity change from 0 to 1024
[   69.998196][   T27] audit: type=1804 audit(1713286296.292:49): pid=3904 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.3" name="/root/syzkaller-testdir2990492561/syzkaller.OAW3h1/8/bus" dev="sda1" ino=1983 res=1 errno=0
[   70.023542][   T27] audit: type=1804 audit(1713286296.312:50): pid=3907 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.6" name="/root/syzkaller-testdir3286176162/syzkaller.J1X8FP/4/bus" dev="sda1" ino=1987 res=1 errno=0
2024/04/16 16:51:36 executed programs: 51
[   70.103127][   T27] audit: type=1804 audit(1713286296.352:51): pid=3910 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.1" name="/root/syzkaller-testdir1062981863/syzkaller.u6qaBt/8/bus" dev="sda1" ino=1989 res=1 errno=0
[   70.305930][   T27] audit: type=1804 audit(1713286296.452:52): pid=3914 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.5" name="/root/syzkaller-testdir4170142998/syzkaller.1QaWYO/6/bus" dev="sda1" ino=1991 res=1 errno=0
[   70.350986][ T3921] loop4: detected capacity change from 0 to 1024
[   70.356291][ T3711] ldm_validate_partition_table(): Disk read failed.
[   70.403337][ T3711]  loop4: unable to read partition table
[   70.536461][   T27] audit: type=1804 audit(1713286296.802:53): pid=3922 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.4" name="/root/syzkaller-testdir3222067680/syzkaller.EJSZM1/4/bus" dev="sda1" ino=1978 res=1 errno=0
[   70.557100][ T3926] loop2: detected capacity change from 0 to 1024
[   70.583597][ T3916] ldm_validate_partition_table(): Disk read failed.
[   70.626254][ T3916]  loop2: unable to read partition table
[   70.715449][   T27] audit: type=1804 audit(1713286297.012:54): pid=3928 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.2" name="/root/syzkaller-testdir3292336804/syzkaller.i6osI5/5/bus" dev="sda1" ino=1953 res=1 errno=0
[   70.949581][   T27] audit: type=1804 audit(1713286297.152:55): pid=3932 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.7" name="/root/syzkaller-testdir3255321565/syzkaller.KLBqn9/5/bus" dev="sda1" ino=1964 res=1 errno=0
[   70.984448][ T3936] loop3: detected capacity change from 0 to 1024
[   70.996099][ T3520] ldm_validate_partition_table(): Disk read failed.
[   71.011355][ T3938] loop1: detected capacity change from 0 to 1024
[   71.028919][ T3813] ldm_validate_partition_table(): Disk read failed.
[   71.052057][ T3941] loop0: detected capacity change from 0 to 1024
[   71.063930][ T3520]  loop3: unable to read partition table
[   71.076915][ T3517] ldm_validate_partition_table(): Disk read failed.
[   71.107475][ T3813] Dev loop1: unable to read RDB block 0
[   71.153348][ T3517]  loop0: unable to read partition table
[   71.180977][ T3813]  loop1: unable to read partition table
[   71.229702][ T3950] loop5: detected capacity change from 0 to 1024
[   71.285289][   T27] audit: type=1804 audit(1713286297.382:56): pid=3939 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.6" name="/root/syzkaller-testdir3286176162/syzkaller.J1X8FP/5/bus" dev="sda1" ino=1983 res=1 errno=0
[   71.317009][ T3711] ldm_validate_partition_table(): Disk read failed.
[   71.382231][   T27] audit: type=1804 audit(1713286297.432:57): pid=3943 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.1" name="/root/syzkaller-testdir1062981863/syzkaller.u6qaBt/9/bus" dev="sda1" ino=1987 res=1 errno=0
[   71.414839][ T1234] ieee802154 phy0 wpan0: encryption failed: -22
[   71.421514][ T1234] ieee802154 phy1 wpan1: encryption failed: -22
[   71.461808][ T3711]  loop5: unable to read partition table
[   71.493006][ T3958] loop4: detected capacity change from 0 to 1024
[   71.633771][ T3964] loop2: detected capacity change from 0 to 1024
[   71.645198][ T3517] ldm_validate_partition_table(): Disk read failed.
[   71.677163][ T3517] Dev loop2: unable to read RDB block 0
[   71.717307][ T3517]  loop2: unable to read partition table
[   71.796799][ T3969] loop7: detected capacity change from 0 to 1024
[   71.944021][ T3973] loop6: detected capacity change from 0 to 1024
[   71.952777][ T3975] loop1: detected capacity change from 0 to 1024
[   72.013318][ T3979] loop3: detected capacity change from 0 to 1024
[   72.037209][ T3981] loop0: detected capacity change from 0 to 1024
[   72.296078][ T3991] loop5: detected capacity change from 0 to 1024
[   72.544443][ T3996] loop4: detected capacity change from 0 to 1024
[   72.674184][ T3999] loop2: detected capacity change from 0 to 1024
[   72.683760][ T3517] ldm_validate_partition_table(): Disk read failed.
[   72.698549][ T3517] Dev loop2: unable to read RDB block 0
[   72.761241][ T3517]  loop2: unable to read partition table
[   72.840911][ T4004] loop7: detected capacity change from 0 to 1024
[   72.842693][ T3917] blk_print_req_error: 76 callbacks suppressed
[   72.842709][ T3917] I/O error, dev loop7, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   72.966402][ T3917] buffer_io_error: 76 callbacks suppressed
[   72.966416][ T3917] Buffer I/O error on dev loop7, logical block 0, async page read
[   72.996916][ T4008] loop6: detected capacity change from 0 to 1024
[   73.018376][ T3917]  loop7: unable to read partition table
[   73.127955][ T4016] loop0: detected capacity change from 0 to 1024
[   73.131216][ T3711] I/O error, dev loop0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   73.181378][ T3711] Buffer I/O error on dev loop0, logical block 0, async page read
[   73.186348][ T4014] loop1: detected capacity change from 0 to 1024
[   73.245753][ T3711]  loop0: unable to read partition table
[   73.280331][ T4018] loop3: detected capacity change from 0 to 1024
[   73.301391][ T4023] loop4: detected capacity change from 0 to 1024
[   73.343232][ T3517] I/O error, dev loop4, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   73.383057][ T3517] Buffer I/O error on dev loop4, logical block 0, async page read
[   73.428038][ T4028] loop5: detected capacity change from 0 to 1024
[   73.436219][ T3711] I/O error, dev loop5, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   73.462898][ T3517]  loop4: unable to read partition table
[   73.522563][ T3711] Buffer I/O error on dev loop5, logical block 0, async page read
[   73.584108][ T3711]  loop5: unable to read partition table
[   73.783631][ T4040] loop2: detected capacity change from 0 to 1024
[   73.794661][ T3917] I/O error, dev loop2, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   73.863717][ T3917] Buffer I/O error on dev loop2, logical block 0, async page read
[   73.880630][ T4042] loop7: detected capacity change from 0 to 1024
[   73.900748][ T3517] I/O error, dev loop7, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   73.919581][ T3917]  loop2: unable to read partition table
[   73.955755][ T3517] Buffer I/O error on dev loop7, logical block 0, async page read
[   73.988689][ T3517]  loop7: unable to read partition table
[   74.114924][ T4050] loop6: detected capacity change from 0 to 1024
[   74.144956][ T4053] loop1: detected capacity change from 0 to 1024
[   74.200582][ T4054] loop0: detected capacity change from 0 to 1024
[   74.282851][ T4059] loop3: detected capacity change from 0 to 1024
[   74.347017][ T4066] loop4: detected capacity change from 0 to 1024
[   74.355593][ T4068] loop5: detected capacity change from 0 to 1024
[   74.390744][ T3711] I/O error, dev loop5, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   74.403190][ T3711] Buffer I/O error on dev loop5, logical block 0, async page read
[   74.411774][ T3711] I/O error, dev loop5, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   74.422479][ T3711] Buffer I/O error on dev loop5, logical block 0, async page read
[   74.432132][ T3711] I/O error, dev loop5, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   74.441978][ T3711] Buffer I/O error on dev loop5, logical block 0, async page read
[   74.451229][ T3711] I/O error, dev loop5, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   74.477444][ T3711] Buffer I/O error on dev loop5, logical block 0, async page read
[   74.496978][ T3711]  loop5: unable to read partition table
[   74.753232][ T4079] loop2: detected capacity change from 0 to 1024
[   74.935269][ T4083] loop7: detected capacity change from 0 to 1024
[   74.991589][ T3711] ldm_validate_partition_table(): Disk read failed.
[   75.007026][ T3711]  loop7: unable to read partition table
[   75.033230][   T27] kauditd_printk_skb: 29 callbacks suppressed
[   75.033243][   T27] audit: type=1804 audit(1713286301.392:87): pid=4084 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.7" name="/root/syzkaller-testdir3255321565/syzkaller.KLBqn9/9/bus" dev="sda1" ino=1963 res=1 errno=0
2024/04/16 16:51:41 executed programs: 88
[   75.237540][ T4090] loop6: detected capacity change from 0 to 1024
[   75.238079][ T4089] loop1: detected capacity change from 0 to 1024
[   75.252195][ T3517] ldm_validate_partition_table(): Disk read failed.
[   75.272688][ T4092] loop0: detected capacity change from 0 to 1024
[   75.278769][ T3517] Dev loop6: unable to read RDB block 0
[   75.333195][   T27] audit: type=1804 audit(1713286301.692:88): pid=4093 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.6" name="/root/syzkaller-testdir3286176162/syzkaller.J1X8FP/9/bus" dev="sda1" ino=1977 res=1 errno=0
[   75.357968][ T3517]  loop6: unable to read partition table
[   75.454548][ T4099] loop3: detected capacity change from 0 to 1024
[   75.468362][ T4103] loop4: detected capacity change from 0 to 1024
[   75.487505][ T3917] ldm_validate_partition_table(): Disk read failed.
[   75.489782][ T3517] ldm_validate_partition_table(): Disk read failed.
[   75.514795][   T27] audit: type=1804 audit(1713286301.762:89): pid=4095 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.0" name="/root/syzkaller-testdir3788737077/syzkaller.P4XkA3/10/bus" dev="sda1" ino=1980 res=1 errno=0
[   75.543194][ T3917]  loop4: unable to read partition table
[   75.554785][ T3517]  loop3: unable to read partition table
[   75.571669][ T4107] loop5: detected capacity change from 0 to 1024
[   75.783608][   T27] audit: type=1804 audit(1713286301.812:90): pid=4097 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.1" name="/root/syzkaller-testdir1062981863/syzkaller.u6qaBt/13/bus" dev="sda1" ino=1986 res=1 errno=0
[   75.792964][ T4120] loop2: detected capacity change from 0 to 1024
[   75.842260][ T3517] ldm_validate_partition_table(): Disk read failed.
[   75.849126][ T3517] Dev loop2: unable to read RDB block 0
[   75.919047][ T3517]  loop2: unable to read partition table
[   75.957763][   T27] audit: type=1804 audit(1713286301.972:91): pid=4109 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.3" name="/root/syzkaller-testdir2990492561/syzkaller.OAW3h1/13/bus" dev="sda1" ino=1997 res=1 errno=0
[   75.968308][ T4122] loop7: detected capacity change from 0 to 1024
[   76.236778][   T27] audit: type=1804 audit(1713286302.032:92): pid=4113 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.4" name="/root/syzkaller-testdir3222067680/syzkaller.EJSZM1/9/bus" dev="sda1" ino=1958 res=1 errno=0
[   76.279215][ T4130] loop1: detected capacity change from 0 to 1024
[   76.320383][ T4129] loop6: detected capacity change from 0 to 1024
[   76.381133][ T4133] loop0: detected capacity change from 0 to 1024
[   76.476291][ T4140] loop3: detected capacity change from 0 to 1024
[   76.492569][   T27] audit: type=1804 audit(1713286302.032:93): pid=4112 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.5" name="/root/syzkaller-testdir4170142998/syzkaller.1QaWYO/11/bus" dev="sda1" ino=1954 res=1 errno=0
[   76.564147][  T141] cfg80211: failed to load regulatory.db
[   76.590092][ T4143] loop4: detected capacity change from 0 to 1024
[   76.622986][ T4145] loop5: detected capacity change from 0 to 1024
[   76.720875][   T27] audit: type=1804 audit(1713286302.422:94): pid=4123 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.2" name="/root/syzkaller-testdir3292336804/syzkaller.i6osI5/10/bus" dev="sda1" ino=1965 res=1 errno=0
[   76.900592][ T4157] loop2: detected capacity change from 0 to 1024
[   76.966166][   T27] audit: type=1804 audit(1713286302.462:95): pid=4125 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.7" name="/root/syzkaller-testdir3255321565/syzkaller.KLBqn9/10/bus" dev="sda1" ino=1968 res=1 errno=0
[   77.198767][   T27] audit: type=1804 audit(1713286302.722:96): pid=4135 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.6" name="/root/syzkaller-testdir3286176162/syzkaller.J1X8FP/10/bus" dev="sda1" ino=1980 res=1 errno=0
[   77.258721][ T4161] loop7: detected capacity change from 0 to 1024
[   77.478078][ T4166] loop4: detected capacity change from 0 to 1024
[   77.522473][ T4169] loop1: detected capacity change from 0 to 1024
[   77.523569][ T3917] ldm_validate_partition_table(): Disk read failed.
[   77.552365][ T4172] loop0: detected capacity change from 0 to 1024
[   77.576439][ T4171] loop3: detected capacity change from 0 to 1024
[   77.579308][ T3517] ldm_validate_partition_table(): Disk read failed.
[   77.599986][ T4174] loop6: detected capacity change from 0 to 1024
[   77.616392][ T3517] Dev loop3: unable to read RDB block 0
[   77.626792][ T3917]  loop1: unable to read partition table
[   77.755089][ T3517]  loop3: unable to read partition table
[   77.848917][ T4190] loop5: detected capacity change from 0 to 1024
[   78.001743][ T4193] loop2: detected capacity change from 0 to 1024
[   78.091692][ T4198] loop0: detected capacity change from 0 to 1024
[   78.243389][ T4204] loop7: detected capacity change from 0 to 1024
[   78.251878][ T3711] blk_print_req_error: 73 callbacks suppressed
[   78.251894][ T3711] I/O error, dev loop7, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   78.354707][ T3711] buffer_io_error: 73 callbacks suppressed
[   78.354722][ T3711] Buffer I/O error on dev loop7, logical block 0, async page read
[   78.465010][ T3711]  loop7: unable to read partition table
[   78.557921][ T4211] loop4: detected capacity change from 0 to 1024
[   78.585129][ T3517] I/O error, dev loop4, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   78.654709][ T4214] loop3: detected capacity change from 0 to 1024
[   78.669083][ T3517] Buffer I/O error on dev loop4, logical block 0, async page read
[   78.680776][ T4215] loop6: detected capacity change from 0 to 1024
[   78.701789][ T4216] loop1: detected capacity change from 0 to 1024
[   78.768126][ T3517]  loop4: unable to read partition table
[   78.883490][ T4228] loop5: detected capacity change from 0 to 1024
[   79.025580][ T4232] loop2: detected capacity change from 0 to 1024
[   79.144395][ T4235] loop0: detected capacity change from 0 to 1024
[   79.317674][ T4241] loop7: detected capacity change from 0 to 1024
[   79.625919][ T4245] loop4: detected capacity change from 0 to 1024
[   79.699147][ T4247] loop3: detected capacity change from 0 to 1024
[   79.765158][ T4253] loop1: detected capacity change from 0 to 1024
[   79.775112][ T4255] loop6: detected capacity change from 0 to 1024
[   79.785086][ T4254] loop7: detected capacity change from 0 to 1024
[   79.897924][ T4265] loop2: detected capacity change from 0 to 1024
[   79.906641][ T4267] loop5: detected capacity change from 0 to 1024
[   80.139747][ T4277] loop0: detected capacity change from 0 to 1024
2024/04/16 16:51:46 executed programs: 127
[   80.341976][ T4281] loop7: detected capacity change from 0 to 1024
[   80.498725][ T4286] loop1: detected capacity change from 0 to 1024
[   80.590392][ T4291] loop2: detected capacity change from 0 to 1024
[   80.610042][ T4289] loop0: detected capacity change from 0 to 1024
[   80.610214][   T27] kauditd_printk_skb: 31 callbacks suppressed
[   80.610226][   T27] audit: type=1804 audit(1713286306.962:128): pid=4292 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.1" name="/root/syzkaller-testdir1062981863/syzkaller.u6qaBt/18/bus" dev="sda1" ino=1946 res=1 errno=0
[   80.695635][ T4296] loop3: detected capacity change from 0 to 1024
[   80.708665][ T4300] loop7: detected capacity change from 0 to 1024
[   80.738969][ T2972] I/O error, dev loop3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   80.782279][ T2972] Buffer I/O error on dev loop3, logical block 0, async page read
[   80.788906][ T4305] loop4: detected capacity change from 0 to 1024
[   80.816910][ T4310] loop5: detected capacity change from 0 to 1024
[   80.824089][ T4311] loop6: detected capacity change from 0 to 1024
[   80.833761][   T27] audit: type=1804 audit(1713286307.072:129): pid=4297 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.2" name="/root/syzkaller-testdir3292336804/syzkaller.i6osI5/15/bus" dev="sda1" ino=1956 res=1 errno=0
[   80.862801][ T2972]  loop3: unable to read partition table
[   81.032331][ T4320] loop0: detected capacity change from 0 to 1024
[   81.054277][   T27] audit: type=1804 audit(1713286307.152:130): pid=4307 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.3" name="/root/syzkaller-testdir2990492561/syzkaller.OAW3h1/18/bus" dev="sda1" ino=1957 res=1 errno=0
[   81.237280][   T27] audit: type=1804 audit(1713286307.172:131): pid=4309 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.7" name="/root/syzkaller-testdir3255321565/syzkaller.KLBqn9/16/bus" dev="sda1" ino=1991 res=1 errno=0
[   81.443884][   T27] audit: type=1804 audit(1713286307.272:132): pid=4318 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.5" name="/root/syzkaller-testdir4170142998/syzkaller.1QaWYO/16/bus" dev="sda1" ino=1959 res=1 errno=0
[   81.552415][ T4328] loop1: detected capacity change from 0 to 1024
[   81.628155][ T4330] loop2: detected capacity change from 0 to 1024
[   81.669312][ T4334] loop6: detected capacity change from 0 to 1024
[   81.693373][   T27] audit: type=1804 audit(1713286307.292:133): pid=4311 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.6" name="/root/syzkaller-testdir3286176162/syzkaller.J1X8FP/14/file0/bus" dev="loop6" ino=18 res=1 errno=0
[   81.758465][ T4340] loop3: detected capacity change from 0 to 1024
[   81.825571][ T4347] loop4: detected capacity change from 0 to 1024
[   81.827394][ T4345] loop7: detected capacity change from 0 to 1024
[   81.847971][ T4348] loop5: detected capacity change from 0 to 1024
[   81.876386][ T2972] I/O error, dev loop4, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   81.888910][   T27] audit: type=1804 audit(1713286307.302:134): pid=4315 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.4" name="/root/syzkaller-testdir3222067680/syzkaller.EJSZM1/14/bus" dev="sda1" ino=1950 res=1 errno=0
[   81.917888][ T2972] Buffer I/O error on dev loop4, logical block 0, async page read
[   81.928764][   T27] audit: type=1804 audit(1713286307.512:135): pid=4324 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.0" name="/root/syzkaller-testdir3788737077/syzkaller.P4XkA3/17/bus" dev="sda1" ino=1999 res=1 errno=0
[   81.959732][ T2972]  loop4: unable to read partition table
[   81.964066][   T27] audit: type=1804 audit(1713286308.132:136): pid=4341 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.6" name="/root/syzkaller-testdir3286176162/syzkaller.J1X8FP/15/bus" dev="sda1" ino=1974 res=1 errno=0
[   81.967515][ T4354] loop0: detected capacity change from 0 to 1024
[   82.158881][   T27] audit: type=1804 audit(1713286308.132:137): pid=4332 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.1" name="/root/syzkaller-testdir1062981863/syzkaller.u6qaBt/19/bus" dev="sda1" ino=1969 res=1 errno=0
[   82.299161][ T4362] loop4: detected capacity change from 0 to 1024
[   82.544484][ T4367] loop2: detected capacity change from 0 to 1024
[   82.564234][ T4370] loop1: detected capacity change from 0 to 1024
[   82.597061][ T4369] loop5: detected capacity change from 0 to 1024
[   82.619620][ T2972] I/O error, dev loop1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   82.668220][ T4376] loop6: detected capacity change from 0 to 1024
[   82.679572][ T2972] Buffer I/O error on dev loop1, logical block 0, async page read
[   82.699766][ T4380] loop0: detected capacity change from 0 to 1024
[   82.704850][ T2972]  loop1: unable to read partition table
[   82.914225][ T4390] loop3: detected capacity change from 0 to 1024
[   82.922359][ T4392] loop7: detected capacity change from 0 to 1024
[   82.975608][ T4394] loop4: detected capacity change from 0 to 1024
[   83.133151][ T4401] loop0: detected capacity change from 0 to 1024
[   83.567386][ T4409] loop5: detected capacity change from 0 to 1024
[   83.590191][ T4410] loop2: detected capacity change from 0 to 1024
[   83.599501][ T4413] loop1: detected capacity change from 0 to 1024
[   83.633309][ T4414] loop6: detected capacity change from 0 to 1024
[   83.913042][ T4425] loop4: detected capacity change from 0 to 1024
[   83.960672][ T4428] loop3: detected capacity change from 0 to 1024
[   83.994166][ T4429] loop7: detected capacity change from 0 to 1024
[   83.995672][ T4432] loop6: detected capacity change from 0 to 1024
[   84.006032][ T2972] I/O error, dev loop6, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   84.082832][ T2972] Buffer I/O error on dev loop6, logical block 0, async page read
[   84.093205][ T2972]  loop6: unable to read partition table
[   84.216962][ T4442] loop0: detected capacity change from 0 to 1024
[   84.547521][ T4449] loop5: detected capacity change from 0 to 1024
[   84.640822][ T4454] loop2: detected capacity change from 0 to 1024
[   84.646540][ T4452] loop1: detected capacity change from 0 to 1024
[   85.316719][ T4482] loop0: detected capacity change from 0 to 1024
[   85.359189][ T3520] I/O error, dev loop0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
2024/04/16 16:51:51 executed programs: 172
[   85.447762][ T3520] Buffer I/O error on dev loop0, logical block 0, async page read
[   85.590630][ T3520]  loop0: unable to read partition table
[   85.655897][ T4486] loop1: detected capacity change from 0 to 1024
[   85.668855][ T3811] I/O error, dev loop1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   85.762879][   T27] kauditd_printk_skb: 34 callbacks suppressed
[   85.762891][   T27] audit: type=1804 audit(1713286312.122:172): pid=4488 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.1" name="/root/syzkaller-testdir1062981863/syzkaller.u6qaBt/23/bus" dev="sda1" ino=1963 res=1 errno=0
[   85.772596][ T3811] Buffer I/O error on dev loop1, logical block 0, async page read
[   85.904266][ T4492] loop2: detected capacity change from 0 to 1024
[   85.977651][ T4494] loop7: detected capacity change from 0 to 1024
[   86.020600][ T3520] I/O error, dev loop7, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   86.070913][ T3520] Buffer I/O error on dev loop7, logical block 0, async page read
[   86.092328][ T4499] loop4: detected capacity change from 0 to 1024
[   86.096831][ T4501] loop5: detected capacity change from 0 to 1024
[   86.120848][   T27] audit: type=1804 audit(1713286312.482:173): pid=4502 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.7" name="/root/syzkaller-testdir3255321565/syzkaller.KLBqn9/21/bus" dev="sda1" ino=1980 res=1 errno=0
[   86.128653][ T3917] I/O error, dev loop4, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   86.161728][ T4505] loop6: detected capacity change from 0 to 1024
[   86.168797][ T3520]  loop7: unable to read partition table
[   86.197267][ T4507] loop3: detected capacity change from 0 to 1024
[   86.199549][ T3813] I/O error, dev loop3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   86.342752][ T3813] Buffer I/O error on dev loop3, logical block 0, async page read
[   86.385319][ T3813]  loop3: unable to read partition table
[   86.397775][   T27] audit: type=1804 audit(1713286312.522:174): pid=4504 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.4" name="/root/syzkaller-testdir3222067680/syzkaller.EJSZM1/20/bus" dev="sda1" ino=1987 res=1 errno=0
[   86.447520][ T3917] Buffer I/O error on dev loop4, logical block 0, async page read
[   86.546705][ T3811] I/O error, dev loop1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   86.571704][   T27] audit: type=1804 audit(1713286312.652:175): pid=4515 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.3" name="/root/syzkaller-testdir2990492561/syzkaller.OAW3h1/23/bus" dev="sda1" ino=1992 res=1 errno=0
[   86.603982][ T3811] Buffer I/O error on dev loop1, logical block 0, async page read
[   86.668659][ T3811] ldm_validate_partition_table(): Disk read failed.
[   86.717739][ T3811] Dev loop1: unable to read RDB block 0
[   86.721232][ T4522] loop2: detected capacity change from 0 to 1024
[   86.743737][ T3917] I/O error, dev loop4, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   86.761007][   T27] audit: type=1804 audit(1713286312.702:176): pid=4513 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.6" name="/root/syzkaller-testdir3286176162/syzkaller.J1X8FP/20/bus" dev="sda1" ino=1993 res=1 errno=0
[   86.764382][ T3811]  loop1: unable to read partition table
[   86.795951][ T4524] loop0: detected capacity change from 0 to 1024
[   86.808582][ T3917] Buffer I/O error on dev loop4, logical block 0, async page read
[   86.841872][ T3811] loop1: partition table beyond EOD, truncated
[   86.850775][ T3917] ldm_validate_partition_table(): Disk read failed.
[   86.904467][ T3917] Dev loop4: unable to read RDB block 0
[   87.041631][ T3917]  loop4: unable to read partition table
[   87.047545][   T27] audit: type=1804 audit(1713286313.062:177): pid=4520 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.5" name="/root/syzkaller-testdir4170142998/syzkaller.1QaWYO/23/bus" dev="sda1" ino=1988 res=1 errno=0
[   87.051279][ T4535] loop1: detected capacity change from 0 to 1024
[   87.091675][ T4536] loop7: detected capacity change from 0 to 1024
[   87.094477][ T3917] loop4: partition table beyond EOD, 
[   87.102442][ T4537] loop6: detected capacity change from 0 to 1024
[   87.124941][ T3917] truncated
[   87.149441][ T3517] I/O error, dev loop1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   87.182512][   T27] audit: type=1804 audit(1713286313.212:178): pid=4526 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.2" name="/root/syzkaller-testdir3292336804/syzkaller.i6osI5/21/bus" dev="sda1" ino=1957 res=1 errno=0
[   87.196586][ T3517] Buffer I/O error on dev loop1, logical block 0, async page read
[   87.286224][ T4545] loop3: detected capacity change from 0 to 1024
[   87.308402][ T4546] loop4: detected capacity change from 0 to 1024
[   87.330375][ T3711] I/O error, dev loop4, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   87.339730][ T3711] Buffer I/O error on dev loop4, logical block 0, async page read
[   87.403464][ T3517]  loop1: unable to read partition table
[   87.455856][ T3711]  loop4: unable to read partition table
[   87.466521][   T27] audit: type=1804 audit(1713286313.262:179): pid=4529 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.0" name="/root/syzkaller-testdir3788737077/syzkaller.P4XkA3/23/bus" dev="sda1" ino=1952 res=1 errno=0
[   87.568018][   T27] audit: type=1804 audit(1713286313.532:180): pid=4536 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.7" name="/root/syzkaller-testdir3255321565/syzkaller.KLBqn9/22/file0/bus" dev="loop7" ino=18 res=1 errno=0
[   87.596302][   T27] audit: type=1804 audit(1713286313.612:181): pid=4542 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.1" name="/root/syzkaller-testdir1062981863/syzkaller.u6qaBt/24/bus" dev="sda1" ino=1965 res=1 errno=0
[   87.626797][ T4557] loop6: detected capacity change from 0 to 1024
[   87.670284][ T4559] loop5: detected capacity change from 0 to 1024
[   87.855506][ T4567] loop7: detected capacity change from 0 to 1024
[   87.882699][ T4569] loop2: detected capacity change from 0 to 1024
[   87.893922][ T3811] ldm_validate_partition_table(): Disk read failed.
[   87.910612][ T3916] ldm_validate_partition_table(): Disk read failed.
[   87.917553][ T3916] Dev loop2: unable to read RDB block 0
[   87.940987][ T3811]  loop7: unable to read partition table
[   87.997307][ T3916]  loop2: unable to read partition table
[   88.206481][ T4580] loop1: detected capacity change from 0 to 1024
[   88.323034][ T4585] loop4: detected capacity change from 0 to 1024
[   88.364765][ T4586] loop3: detected capacity change from 0 to 1024
[   88.541180][ T4592] loop6: detected capacity change from 0 to 1024
[   88.552033][ T3711] ldm_validate_partition_table(): Disk read failed.
[   88.559162][ T3711] Dev loop6: unable to read RDB block 0
[   88.602583][ T3711]  loop6: unable to read partition table
[   88.617859][ T4595] loop5: detected capacity change from 0 to 1024
[   88.716556][ T4599] loop2: detected capacity change from 0 to 1024
[   88.831898][ T4607] loop7: detected capacity change from 0 to 1024
[   88.883188][ T4609] loop0: detected capacity change from 0 to 1024
[   89.263769][ T4619] loop1: detected capacity change from 0 to 1024
[   89.418242][ T4629] loop4: detected capacity change from 0 to 1024
[   89.447574][ T4626] loop3: detected capacity change from 0 to 1024
[   89.473028][ T3917] blk_print_req_error: 37 callbacks suppressed
[   89.473044][ T3917] I/O error, dev loop4, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   89.509439][ T3917] buffer_io_error: 37 callbacks suppressed
[   89.509454][ T3917] Buffer I/O error on dev loop4, logical block 0, async page read
[   89.546365][ T3917]  loop4: unable to read partition table
[   89.588258][ T4637] loop2: detected capacity change from 0 to 1024
[   89.657404][ T4642] loop5: detected capacity change from 0 to 1024
[   89.668428][ T4643] loop6: detected capacity change from 0 to 1024
[   89.699314][ T4629] EXT4-fs mount: 299 callbacks suppressed
[   89.699330][ T4629] EXT4-fs (loop4): mounted filesystem without journal. Quota mode: writeback.
[   89.715083][ T3711] I/O error, dev loop5, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   89.716475][ T3917] I/O error, dev loop6, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   89.757901][ T4637] EXT4-fs (loop2): mounted filesystem without journal. Quota mode: writeback.
[   89.759158][ T3711] Buffer I/O error on dev loop5, logical block 0, async page read
[   89.831440][ T3917] Buffer I/O error on dev loop6, logical block 0, async page read
[   89.888656][ T3917]  loop6: unable to read partition table
[   89.907121][ T3538] EXT4-fs (loop0): unmounting filesystem.
[   89.908538][ T3711]  loop5: unable to read partition table
[   90.015346][ T4643] EXT4-fs (loop6): mounted filesystem without journal. Quota mode: writeback.
[   90.126910][ T3535] EXT4-fs (loop1): unmounting filesystem.
[   90.132715][ T4655] loop0: detected capacity change from 0 to 1024
[   90.169356][ T3917] I/O error, dev loop0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   90.201975][ T3917] Buffer I/O error on dev loop0, logical block 0, async page read
[   90.255777][ T3917]  loop0: unable to read partition table
[   90.285549][ T3537] EXT4-fs (loop3): unmounting filesystem.
[   90.327429][ T3642] EXT4-fs (loop4): unmounting filesystem.
[   90.335244][ T4660] loop1: detected capacity change from 0 to 1024
[   90.343689][ T4655] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: writeback.
[   90.382256][ T3517] I/O error, dev loop1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   90.391269][ T4662] loop7: detected capacity change from 0 to 1024
[   90.392273][ T3711] I/O error, dev loop7, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   90.415928][ T3517] Buffer I/O error on dev loop1, logical block 0, async page read
2024/04/16 16:51:56 executed programs: 212
[   90.458771][ T3711] Buffer I/O error on dev loop7, logical block 0, async page read
[   90.486709][ T3517]  loop1: unable to read partition table
[   90.524515][ T3711]  loop7: unable to read partition table
[   90.532549][ T3543] EXT4-fs (loop2): unmounting filesystem.
[   90.539445][ T3542] EXT4-fs (loop6): unmounting filesystem.
[   90.584380][ T4672] loop3: detected capacity change from 0 to 1024
[   90.615154][ T4671] loop4: detected capacity change from 0 to 1024
[   90.658433][ T4677] loop6: detected capacity change from 0 to 1024
[   90.665086][ T4660] EXT4-fs (loop1): mounted filesystem without journal. Quota mode: writeback.
[   90.667604][ T4676] loop2: detected capacity change from 0 to 1024
[   90.704856][ T4678] loop5: detected capacity change from 0 to 1024
[   90.748672][ T4662] EXT4-fs (loop7): mounted filesystem without journal. Quota mode: writeback.
[   90.752243][ T4676] EXT4-fs (loop2): mounted filesystem without journal. Quota mode: writeback.
[   90.766838][ T4677] EXT4-fs (loop6): mounted filesystem without journal. Quota mode: writeback.
[   90.786565][   T27] kauditd_printk_skb: 26 callbacks suppressed
[   90.786578][   T27] audit: type=1804 audit(1713286317.142:208): pid=4689 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.5" name="/root/syzkaller-testdir4170142998/syzkaller.1QaWYO/27/bus" dev="sda1" ino=1998 res=1 errno=0
[   90.860772][ T4671] EXT4-fs (loop4): mounted filesystem without journal. Quota mode: writeback.
[   90.878914][ T4678] EXT4-fs (loop5): mounted filesystem without journal. Quota mode: writeback.
[   90.919584][   T27] audit: type=1804 audit(1713286317.232:209): pid=4685 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.6" name="/root/syzkaller-testdir3286176162/syzkaller.J1X8FP/25/bus" dev="sda1" ino=1999 res=1 errno=0
[   90.949054][   T27] audit: type=1804 audit(1713286317.262:210): pid=4676 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.2" name="/root/syzkaller-testdir3292336804/syzkaller.i6osI5/25/file0/bus" dev="loop2" ino=18 res=1 errno=0
[   90.965444][ T4672] EXT4-fs (loop3): mounted filesystem without journal. Quota mode: writeback.
[   90.999752][ T3542] EXT4-fs (loop6): unmounting filesystem.
[   91.041000][ T3538] EXT4-fs (loop0): unmounting filesystem.
[   91.226381][ T4696] loop6: detected capacity change from 0 to 1024
[   91.251685][ T3535] EXT4-fs (loop1): unmounting filesystem.
[   91.259361][ T4697] loop0: detected capacity change from 0 to 1024
[   91.280317][ T3917] I/O error, dev loop0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   91.280489][ T3517] I/O error, dev loop6, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   91.302388][ T3917] Buffer I/O error on dev loop0, logical block 0, async page read
[   91.307188][ T3541] EXT4-fs (loop7): unmounting filesystem.
[   91.341446][   T27] audit: type=1804 audit(1713286317.702:211): pid=4698 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.6" name="/root/syzkaller-testdir3286176162/syzkaller.J1X8FP/26/bus" dev="sda1" ino=1973 res=1 errno=0
[   91.415377][ T3517] Buffer I/O error on dev loop6, logical block 0, async page read
[   91.426187][ T3917]  loop0: unable to read partition table
[   91.461580][ T3642] EXT4-fs (loop4): unmounting filesystem.
[   91.478915][ T3537] EXT4-fs (loop3): unmounting filesystem.
[   91.490758][ T3517]  loop6: unable to read partition table
[   91.524304][ T3543] EXT4-fs (loop2): unmounting filesystem.
[   91.542321][   T27] audit: type=1804 audit(1713286317.732:212): pid=4699 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.0" name="/root/syzkaller-testdir3788737077/syzkaller.P4XkA3/27/bus" dev="sda1" ino=1975 res=1 errno=0
[   91.553121][ T4705] loop1: detected capacity change from 0 to 1024
[   91.582897][ T3539] EXT4-fs (loop5): unmounting filesystem.
[   91.596384][ T4707] loop7: detected capacity change from 0 to 1024
[   91.660465][ T4696] EXT4-fs (loop6): mounted filesystem without journal. Quota mode: writeback.
[   91.721046][ T4711] loop4: detected capacity change from 0 to 1024
[   91.723843][ T4712] loop3: detected capacity change from 0 to 1024
[   91.754905][   T27] audit: type=1804 audit(1713286318.112:213): pid=4714 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.1" name="/root/syzkaller-testdir1062981863/syzkaller.u6qaBt/28/bus" dev="sda1" ino=1987 res=1 errno=0
[   91.783506][ T4715] loop5: detected capacity change from 0 to 1024
[   91.809498][ T4722] loop2: detected capacity change from 0 to 1024
[   91.864142][ T4707] EXT4-fs (loop7): mounted filesystem without journal. Quota mode: writeback.
[   91.901291][ T4711] EXT4-fs (loop4): mounted filesystem without journal. Quota mode: writeback.
[   91.974983][ T3917] I/O error, dev loop2, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   92.018994][ T4715] EXT4-fs (loop5): mounted filesystem without journal. Quota mode: writeback.
[   92.022611][ T3917] Buffer I/O error on dev loop2, logical block 0, async page read
[   92.030661][ T4712] EXT4-fs (loop3): mounted filesystem without journal. Quota mode: writeback.
[   92.064132][   T27] audit: type=1804 audit(1713286318.122:214): pid=4710 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.7" name="/root/syzkaller-testdir3255321565/syzkaller.KLBqn9/27/bus" dev="sda1" ino=1985 res=1 errno=0
[   92.092960][ T3917]  loop2: unable to read partition table
[   92.161254][ T3542] EXT4-fs (loop6): unmounting filesystem.
[   92.264002][   T27] audit: type=1804 audit(1713286318.162:215): pid=4720 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.4" name="/root/syzkaller-testdir3222067680/syzkaller.EJSZM1/25/bus" dev="sda1" ino=1995 res=1 errno=0
[   92.308246][ T4740] loop0: detected capacity change from 0 to 1024
[   92.318755][ T4739] loop6: detected capacity change from 0 to 1024
[   92.376102][ T2972] I/O error, dev loop0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   92.383766][ T4743] loop2: detected capacity change from 0 to 1024
[   92.414455][ T4739] EXT4-fs (loop6): mounted filesystem without journal. Quota mode: writeback.
[   92.419907][ T2972] Buffer I/O error on dev loop0, logical block 0, async page read
[   92.443700][   T27] audit: type=1804 audit(1713286318.202:216): pid=4726 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.5" name="/root/syzkaller-testdir4170142998/syzkaller.1QaWYO/28/bus" dev="sda1" ino=1997 res=1 errno=0
[   92.514733][ T3541] EXT4-fs (loop7): unmounting filesystem.
[   92.528482][ T2972]  loop0: unable to read partition table
[   92.562921][ T4743] EXT4-fs (loop2): mounted filesystem without journal. Quota mode: writeback.
[   92.579416][ T3642] EXT4-fs (loop4): unmounting filesystem.
[   92.583539][ T4752] loop1: detected capacity change from 0 to 1024
[   92.624769][ T3537] EXT4-fs (loop3): unmounting filesystem.
[   92.626840][   T27] audit: type=1804 audit(1713286318.242:217): pid=4723 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.3" name="/root/syzkaller-testdir2990492561/syzkaller.OAW3h1/28/bus" dev="sda1" ino=1998 res=1 errno=0
[   92.638086][ T2972] ldm_validate_partition_table(): Disk read failed.
[   92.660112][ T3539] EXT4-fs (loop5): unmounting filesystem.
[   92.701449][ T4755] loop7: detected capacity change from 0 to 1024
[   92.793260][ T4761] loop4: detected capacity change from 0 to 1024
[   92.814058][ T2972]  loop1: unable to read partition table
[   92.827276][ T4755] EXT4-fs (loop7): mounted filesystem without journal. Quota mode: writeback.
[   92.842629][ T4765] loop5: detected capacity change from 0 to 1024
[   92.853477][ T4764] loop3: detected capacity change from 0 to 1024
[   92.874263][ T4761] EXT4-fs (loop4): mounted filesystem without journal. Quota mode: writeback.
[   92.920736][ T4752] EXT4-fs (loop1): mounted filesystem without journal. Quota mode: writeback.
[   92.995813][ T4765] EXT4-fs (loop5): mounted filesystem without journal. Quota mode: writeback.
[   93.036863][ T4764] EXT4-fs (loop3): mounted filesystem without journal. Quota mode: writeback.
[   93.113988][ T3542] EXT4-fs (loop6): unmounting filesystem.
[   93.197872][ T4779] loop6: detected capacity change from 0 to 1024
[   93.217451][ T3543] EXT4-fs (loop2): unmounting filesystem.
[   93.264128][ T4779] EXT4-fs (loop6): mounted filesystem without journal. Quota mode: writeback.
[   93.314717][ T4782] loop0: detected capacity change from 0 to 1024
[   93.430551][ T4786] loop2: detected capacity change from 0 to 1024
[   93.445495][ T3535] EXT4-fs (loop1): unmounting filesystem.
[   93.467545][ T4782] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: writeback.
[   93.555243][ T3541] EXT4-fs (loop7): unmounting filesystem.
[   93.629280][ T4792] loop1: detected capacity change from 0 to 1024
[   93.651091][ T4786] EXT4-fs (loop2): mounted filesystem without journal. Quota mode: writeback.
[   93.677759][ T3642] EXT4-fs (loop4): unmounting filesystem.
[   93.702760][ T3539] EXT4-fs (loop5): unmounting filesystem.
[   93.713985][ T4796] loop7: detected capacity change from 0 to 1024
[   93.730896][ T3537] EXT4-fs (loop3): unmounting filesystem.
[   93.842240][ T4792] EXT4-fs (loop1): mounted filesystem without journal. Quota mode: writeback.
[   93.849301][ T4796] EXT4-fs (loop7): mounted filesystem without journal. Quota mode: writeback.
[   94.071173][ T3542] EXT4-fs (loop6): unmounting filesystem.
[   94.131790][ T4806] loop5: detected capacity change from 0 to 1024
[   94.215998][ T3538] EXT4-fs (loop0): unmounting filesystem.
[   94.264345][ T4813] loop6: detected capacity change from 0 to 1024
[   94.320871][ T3811] ldm_validate_partition_table(): Disk read failed.
[   94.327703][ T3811] Dev loop6: unable to read RDB block 0
[   94.344921][ T3811]  loop6: unable to read partition table
[   94.456877][ T4806] EXT4-fs (loop5): mounted filesystem without journal. Quota mode: writeback.
[   94.460697][ T3543] EXT4-fs (loop2): unmounting filesystem.
[   94.505515][ T4813] EXT4-fs (loop6): mounted filesystem without journal. Quota mode: writeback.
[   94.521493][ T3535] EXT4-fs (loop1): unmounting filesystem.
[   94.560469][ T4819] loop0: detected capacity change from 0 to 1024
[   94.619949][ T3541] EXT4-fs (loop7): unmounting filesystem.
[   94.704666][ T4826] loop1: detected capacity change from 0 to 1024
[   94.708346][ T4825] loop2: detected capacity change from 0 to 1024
[   94.742044][ T3517] blk_print_req_error: 25 callbacks suppressed
[   94.742089][ T3517] I/O error, dev loop1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   94.778050][ T4819] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: writeback.
[   94.856912][ T3517] buffer_io_error: 25 callbacks suppressed
[   94.856926][ T3517] Buffer I/O error on dev loop1, logical block 0, async page read
[   94.908371][ T4833] loop7: detected capacity change from 0 to 1024
[   94.954278][ T4825] EXT4-fs (loop2): mounted filesystem without journal. Quota mode: writeback.
[   94.974673][ T3517]  loop1: unable to read partition table
[   95.025176][ T3539] EXT4-fs (loop5): unmounting filesystem.
[   95.102117][ T4841] loop3: detected capacity change from 0 to 1024
[   95.107666][ T4842] loop4: detected capacity change from 0 to 1024
[   95.164079][ T4844] loop5: detected capacity change from 0 to 1024
[   95.202446][ T2972] I/O error, dev loop5, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   95.237262][ T2972] Buffer I/O error on dev loop5, logical block 0, async page read
[   95.262653][ T4848] loop6: detected capacity change from 0 to 1024
[   95.286707][ T2972]  loop5: unable to read partition table
2024/04/16 16:52:01 executed programs: 249
[   95.582014][ T4858] loop0: detected capacity change from 0 to 1024
[   95.870217][ T4863] loop1: detected capacity change from 0 to 1024
[   95.933044][ T4865] loop2: detected capacity change from 0 to 1024
[   95.956366][ T4867] loop7: detected capacity change from 0 to 1024
[   95.978829][   T27] kauditd_printk_skb: 29 callbacks suppressed
[   95.978843][   T27] audit: type=1804 audit(1713286322.332:247): pid=4868 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.1" name="/root/syzkaller-testdir1062981863/syzkaller.u6qaBt/32/bus" dev="sda1" ino=1963 res=1 errno=0
[   96.138606][ T4876] loop3: detected capacity change from 0 to 1024
[   96.154482][ T3517] I/O error, dev loop3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   96.228044][ T3517] Buffer I/O error on dev loop3, logical block 0, async page read
[   96.241679][   T27] audit: type=1804 audit(1713286322.392:248): pid=4870 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.2" name="/root/syzkaller-testdir3292336804/syzkaller.i6osI5/30/bus" dev="sda1" ino=1975 res=1 errno=0
[   96.281131][ T4880] loop5: detected capacity change from 0 to 1024
[   96.313872][ T3517]  loop3: unable to read partition table
[   96.355178][ T4884] loop4: detected capacity change from 0 to 1024
[   96.433338][   T27] audit: type=1804 audit(1713286322.512:249): pid=4867 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.7" name="/root/syzkaller-testdir3255321565/syzkaller.KLBqn9/31/file0/bus" dev="loop7" ino=18 res=1 errno=0
[   96.452494][ T4888] loop6: detected capacity change from 0 to 1024
[   96.461324][   T27] audit: type=1804 audit(1713286322.612:250): pid=4879 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.3" name="/root/syzkaller-testdir2990492561/syzkaller.OAW3h1/32/bus" dev="sda1" ino=1969 res=1 errno=0
[   96.498301][   T27] audit: type=1804 audit(1713286322.742:251): pid=4885 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.5" name="/root/syzkaller-testdir4170142998/syzkaller.1QaWYO/32/bus" dev="sda1" ino=1991 res=1 errno=0
[   96.527206][   T27] audit: type=1804 audit(1713286322.822:252): pid=4890 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.4" name="/root/syzkaller-testdir3222067680/syzkaller.EJSZM1/29/bus" dev="sda1" ino=1994 res=1 errno=0
[   96.637723][   T27] audit: type=1804 audit(1713286322.922:253): pid=4892 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.6" name="/root/syzkaller-testdir3286176162/syzkaller.J1X8FP/31/bus" dev="sda1" ino=1995 res=1 errno=0
[   96.788453][ T4897] loop0: detected capacity change from 0 to 1024
[   96.906463][ T4901] loop1: detected capacity change from 0 to 1024
[   96.909088][ T2972] I/O error, dev loop1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   96.929399][   T27] audit: type=1804 audit(1713286323.292:254): pid=4897 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.0" name="/root/syzkaller-testdir3788737077/syzkaller.P4XkA3/32/file0/bus" dev="loop0" ino=18 res=1 errno=0
[   96.957607][ T4903] loop7: detected capacity change from 0 to 1024
[   96.962311][ T4904] loop2: detected capacity change from 0 to 1024
[   96.979748][ T2972] Buffer I/O error on dev loop1, logical block 0, async page read
[   97.017834][ T2972]  loop1: unable to read partition table
[   97.091005][   T27] audit: type=1804 audit(1713286323.352:255): pid=4905 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.1" name="/root/syzkaller-testdir1062981863/syzkaller.u6qaBt/33/bus" dev="sda1" ino=1983 res=1 errno=0
[   97.158441][ T4914] loop3: detected capacity change from 0 to 1024
[   97.171876][   T27] audit: type=1804 audit(1713286323.392:256): pid=4908 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.7" name="/root/syzkaller-testdir3255321565/syzkaller.KLBqn9/32/bus" dev="sda1" ino=1969 res=1 errno=0
[   97.363700][ T4920] loop5: detected capacity change from 0 to 1024
[   97.439420][ T4923] loop4: detected capacity change from 0 to 1024
[   97.452488][ T4924] loop6: detected capacity change from 0 to 1024
[   97.505756][ T4928] loop0: detected capacity change from 0 to 1024
[   97.913238][ T4940] loop7: detected capacity change from 0 to 1024
[   97.943822][ T4941] loop1: detected capacity change from 0 to 1024
[   97.985557][ T4944] loop3: detected capacity change from 0 to 1024
[   98.014725][ T4946] loop2: detected capacity change from 0 to 1024
[   98.450189][ T4956] loop5: detected capacity change from 0 to 1024
[   98.464251][ T4958] loop4: detected capacity change from 0 to 1024
[   98.465106][ T4959] loop6: detected capacity change from 0 to 1024
[   98.535039][ T4962] loop0: detected capacity change from 0 to 1024
[   98.716428][ T4974] loop7: detected capacity change from 0 to 1024
[   98.892360][ T4979] loop2: detected capacity change from 0 to 1024
[   98.952385][ T4983] loop3: detected capacity change from 0 to 1024
[   98.960666][ T4981] loop1: detected capacity change from 0 to 1024
[   99.293740][ T4993] loop5: detected capacity change from 0 to 1024
[   99.310336][ T3811] I/O error, dev loop5, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   99.321264][ T3811] Buffer I/O error on dev loop5, logical block 0, async page read
[   99.429474][ T3811] I/O error, dev loop5, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[   99.519445][ T3811] Buffer I/O error on dev loop5, logical block 0, async page read
[   99.556699][ T4998] loop6: detected capacity change from 0 to 1024
[   99.594733][ T3811]  loop5: unable to read partition table
[   99.783197][ T5007] loop7: detected capacity change from 0 to 1024
[  100.002487][ T5014] loop1: detected capacity change from 0 to 1024
[  100.006303][ T3811] I/O error, dev loop1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  100.034721][ T5015] loop2: detected capacity change from 0 to 1024
[  100.057869][ T3711] I/O error, dev loop2, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  100.175927][ T3811] Buffer I/O error on dev loop1, logical block 0, async page read
[  100.180711][ T3711] Buffer I/O error on dev loop2, logical block 0, async page read
[  100.203755][ T5020] loop3: detected capacity change from 0 to 1024
[  100.221986][ T3813] I/O error, dev loop3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  100.271105][ T3811]  loop1: unable to read partition table
[  100.292630][ T3711]  loop2: unable to read partition table
[  100.310886][ T3813] Buffer I/O error on dev loop3, logical block 0, async page read
[  100.319088][ T5024] loop5: detected capacity change from 0 to 1024
[  100.513202][ T3813]  loop3: unable to read partition table
2024/04/16 16:52:06 executed programs: 289
[  100.638849][ T5034] loop6: detected capacity change from 0 to 1024
[  100.678864][ T5036] loop0: detected capacity change from 0 to 1024
[  100.687484][ T5037] loop5: detected capacity change from 0 to 1024
[  100.735002][ T5040] loop4: detected capacity change from 0 to 1024
[  100.989994][   T27] kauditd_printk_skb: 32 callbacks suppressed
[  100.990008][   T27] audit: type=1804 audit(1713286327.342:289): pid=5054 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.7" name="/root/syzkaller-testdir3255321565/syzkaller.KLBqn9/36/bus" dev="sda1" ino=1957 res=1 errno=0
[  101.262019][   T27] audit: type=1804 audit(1713286327.412:290): pid=5056 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.2" name="/root/syzkaller-testdir3292336804/syzkaller.i6osI5/35/bus" dev="sda1" ino=1958 res=1 errno=0
[  101.313697][ T5063] loop6: detected capacity change from 0 to 1024
[  101.324995][ T5062] loop3: detected capacity change from 0 to 1024
[  101.343498][ T5064] loop1: detected capacity change from 0 to 1024
[  101.357158][ T3517] I/O error, dev loop1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  101.376187][ T4478] I/O error, dev loop3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  101.446053][ T3517] Buffer I/O error on dev loop1, logical block 0, async page read
[  101.458636][ T4478] Buffer I/O error on dev loop3, logical block 0, async page read
[  101.512278][   T27] audit: type=1804 audit(1713286327.772:291): pid=5065 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.3" name="/root/syzkaller-testdir2990492561/syzkaller.OAW3h1/37/bus" dev="sda1" ino=1991 res=1 errno=0
[  101.520714][ T4478]  loop3: unable to read partition table
[  101.539079][   T27] audit: type=1804 audit(1713286327.792:292): pid=5066 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.6" name="/root/syzkaller-testdir3286176162/syzkaller.J1X8FP/36/bus" dev="sda1" ino=1997 res=1 errno=0
[  101.550464][ T3517]  loop1: unable to read partition table
[  101.572977][   T27] audit: type=1804 audit(1713286327.802:293): pid=5067 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.1" name="/root/syzkaller-testdir1062981863/syzkaller.u6qaBt/37/bus" dev="sda1" ino=1998 res=1 errno=0
[  101.673219][ T5073] loop5: detected capacity change from 0 to 1024
[  101.713569][ T5075] loop4: detected capacity change from 0 to 1024
[  101.721159][ T3917] I/O error, dev loop5, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  101.773904][   T27] audit: type=1804 audit(1713286328.132:294): pid=5078 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.5" name="/root/syzkaller-testdir4170142998/syzkaller.1QaWYO/38/bus" dev="sda1" ino=1965 res=1 errno=0
[  101.825970][ T3917] Buffer I/O error on dev loop5, logical block 0, async page read
[  101.839522][   T27] audit: type=1804 audit(1713286328.202:295): pid=5079 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.4" name="/root/syzkaller-testdir3222067680/syzkaller.EJSZM1/34/bus" dev="sda1" ino=1985 res=1 errno=0
[  101.839691][ T5080] loop0: detected capacity change from 0 to 1024
[  101.882952][ T3917]  loop5: unable to read partition table
[  101.929197][ T5086] loop7: detected capacity change from 0 to 1024
[  102.031679][   T27] audit: type=1804 audit(1713286328.392:296): pid=5086 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.7" name="/root/syzkaller-testdir3255321565/syzkaller.KLBqn9/37/file0/bus" dev="loop7" ino=18 res=1 errno=0
[  102.059172][ T5090] loop2: detected capacity change from 0 to 1024
[  102.280825][   T27] audit: type=1804 audit(1713286328.462:297): pid=5091 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.0" name="/root/syzkaller-testdir3788737077/syzkaller.P4XkA3/37/bus" dev="sda1" ino=1994 res=1 errno=0
[  102.315361][ T5099] loop6: detected capacity change from 0 to 1024
[  102.351974][ T2972] I/O error, dev loop6, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  102.386537][ T2972] Buffer I/O error on dev loop6, logical block 0, async page read
[  102.404789][ T5104] loop1: detected capacity change from 0 to 1024
[  102.413085][   T27] audit: type=1804 audit(1713286328.562:298): pid=5097 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.2" name="/root/syzkaller-testdir3292336804/syzkaller.i6osI5/36/bus" dev="sda1" ino=1956 res=1 errno=0
[  102.441568][ T5103] loop3: detected capacity change from 0 to 1024
[  102.454999][ T2972]  loop6: unable to read partition table
[  102.633847][ T5114] loop4: detected capacity change from 0 to 1024
[  102.701632][ T5116] loop5: detected capacity change from 0 to 1024
[  102.828938][ T5124] loop0: detected capacity change from 0 to 1024
[  102.866323][ T5126] loop1: detected capacity change from 0 to 1024
[  103.071203][ T5134] loop7: detected capacity change from 0 to 1024
[  103.101084][ T5135] loop2: detected capacity change from 0 to 1024
[  103.166931][ T5139] loop0: detected capacity change from 0 to 1024
[  103.328557][ T5146] loop6: detected capacity change from 0 to 1024
[  103.369480][ T2972] I/O error, dev loop2, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  103.394801][ T2972] Buffer I/O error on dev loop2, logical block 0, async page read
[  103.433411][ T5150] loop3: detected capacity change from 0 to 1024
[  103.437925][ T2972] ldm_validate_partition_table(): Disk read failed.
[  103.456059][ T2972] Dev loop2: unable to read RDB block 0
[  103.482933][ T2972]  loop2: unable to read partition table
[  103.497517][ T2972] loop2: partition table beyond EOD, truncated
[  103.661696][ T5154] loop4: detected capacity change from 0 to 1024
[  103.750333][ T5157] loop5: detected capacity change from 0 to 1024
[  103.797691][ T5161] loop7: detected capacity change from 0 to 1024
[  103.833786][ T5162] loop0: detected capacity change from 0 to 1024
[  103.898785][ T5168] loop1: detected capacity change from 0 to 1024
[  103.972191][ T5172] loop2: detected capacity change from 0 to 1024
[  104.393296][ T5181] loop1: detected capacity change from 0 to 1024
[  104.400793][ T5182] loop6: detected capacity change from 0 to 1024
[  104.430799][ T5184] loop4: detected capacity change from 0 to 1024
[  104.488517][ T5188] loop3: detected capacity change from 0 to 1024
[  104.808358][ T5199] loop5: detected capacity change from 0 to 1024
[  104.824937][ T3517] I/O error, dev loop5, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  104.857581][ T5203] loop2: detected capacity change from 0 to 1024
[  104.858678][ T5204] loop0: detected capacity change from 0 to 1024
[  104.881711][ T5205] loop7: detected capacity change from 0 to 1024
[  104.886726][ T3517] Buffer I/O error on dev loop5, logical block 0, async page read
[  104.905397][ T2972] I/O error, dev loop2, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  104.933105][ T3517]  loop5: unable to read partition table
[  104.940735][ T2972] Buffer I/O error on dev loop2, logical block 0, async page read
[  104.962207][ T2972]  loop2: unable to read partition table
[  105.348046][ T5219] loop0: detected capacity change from 0 to 1024
[  105.351758][ T3916] I/O error, dev loop0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  105.458975][ T3916] Buffer I/O error on dev loop0, logical block 0, async page read
[  105.552653][ T3916]  loop0: unable to read partition table
[  105.594163][ T5226] loop1: detected capacity change from 0 to 1024
2024/04/16 16:52:12 executed programs: 331
[  105.956185][ T5238] loop5: detected capacity change from 0 to 1024
[  105.993466][ T5241] loop2: detected capacity change from 0 to 1024
[  106.003022][ T5242] loop7: detected capacity change from 0 to 1024
[  106.104971][   T27] kauditd_printk_skb: 29 callbacks suppressed
[  106.104985][   T27] audit: type=1804 audit(1713286332.462:328): pid=5247 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.7" name="/root/syzkaller-testdir3255321565/syzkaller.KLBqn9/41/bus" dev="sda1" ino=1985 res=1 errno=0
[  106.220084][   T27] audit: type=1804 audit(1713286332.492:329): pid=5238 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.5" name="/root/syzkaller-testdir4170142998/syzkaller.1QaWYO/42/file0/bus" dev="loop5" ino=18 res=1 errno=0
[  106.370408][   T27] audit: type=1804 audit(1713286332.552:330): pid=5241 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.2" name="/root/syzkaller-testdir3292336804/syzkaller.i6osI5/40/file0/bus" dev="loop2" ino=18 res=1 errno=0
[  106.492693][ T5254] loop4: detected capacity change from 0 to 1024
[  106.548751][ T5255] loop6: detected capacity change from 0 to 1024
[  106.613817][ T5260] loop1: detected capacity change from 0 to 1024
[  106.625433][ T3711] I/O error, dev loop1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  106.661577][   T27] audit: type=1804 audit(1713286332.902:331): pid=5253 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.0" name="/root/syzkaller-testdir3788737077/syzkaller.P4XkA3/43/bus" dev="sda1" ino=1980 res=1 errno=0
[  106.674311][ T5261] loop3: detected capacity change from 0 to 1024
[  106.712993][ T3711] Buffer I/O error on dev loop1, logical block 0, async page read
[  106.776482][ T3711]  loop1: unable to read partition table
[  106.809017][   T27] audit: type=1804 audit(1713286332.982:332): pid=5262 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.6" name="/root/syzkaller-testdir3286176162/syzkaller.J1X8FP/41/bus" dev="sda1" ino=1992 res=1 errno=0
[  106.836078][   T27] audit: type=1804 audit(1713286333.002:333): pid=5263 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.4" name="/root/syzkaller-testdir3222067680/syzkaller.EJSZM1/39/bus" dev="sda1" ino=1993 res=1 errno=0
[  106.861598][   T27] audit: type=1804 audit(1713286333.102:334): pid=5266 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.1" name="/root/syzkaller-testdir1062981863/syzkaller.u6qaBt/43/bus" dev="sda1" ino=1957 res=1 errno=0
[  106.890510][   T27] audit: type=1804 audit(1713286333.112:335): pid=5258 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=ToMToU comm="syz-executor.4" name="/root/syzkaller-testdir3222067680/syzkaller.EJSZM1/39/bus" dev="sda1" ino=1993 res=1 errno=0
[  106.930777][   T27] audit: type=1804 audit(1713286333.282:336): pid=5270 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.3" name="/root/syzkaller-testdir2990492561/syzkaller.OAW3h1/42/bus" dev="sda1" ino=1956 res=1 errno=0
[  107.031324][ T5275] loop5: detected capacity change from 0 to 1024
[  107.144420][   T27] audit: type=1804 audit(1713286333.502:337): pid=5277 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.5" name="/root/syzkaller-testdir4170142998/syzkaller.1QaWYO/43/bus" dev="sda1" ino=1968 res=1 errno=0
[  107.234659][ T5280] loop7: detected capacity change from 0 to 1024
[  107.277324][ T5281] loop2: detected capacity change from 0 to 1024
[  107.392632][ T5287] loop0: detected capacity change from 0 to 1024
[  107.617885][ T5291] loop4: detected capacity change from 0 to 1024
[  107.635051][ T5295] loop1: detected capacity change from 0 to 1024
[  107.660160][ T5293] loop6: detected capacity change from 0 to 1024
[  107.702005][ T3517] I/O error, dev loop6, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  107.753961][ T5302] loop3: detected capacity change from 0 to 1024
[  107.780581][ T3517] Buffer I/O error on dev loop6, logical block 0, async page read
[  107.799539][ T2972] I/O error, dev loop3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  107.843743][ T3517]  loop6: unable to read partition table
[  107.872228][ T2972] Buffer I/O error on dev loop3, logical block 0, async page read
[  107.927003][ T2972]  loop3: unable to read partition table
[  107.937480][ T3517] I/O error, dev loop6, sector 32 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[  108.046533][ T5310] loop5: detected capacity change from 0 to 1024
[  108.270437][ T5315] loop7: detected capacity change from 0 to 1024
[  108.299176][ T5317] loop2: detected capacity change from 0 to 1024
[  108.407820][ T5322] loop0: detected capacity change from 0 to 1024
[  108.429466][ T5325] loop4: detected capacity change from 0 to 1024
[  108.471715][ T5329] loop6: detected capacity change from 0 to 1024
[  108.658555][ T5337] loop1: detected capacity change from 0 to 1024
[  108.722079][ T3517] I/O error, dev loop1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  108.751597][ T3517] Buffer I/O error on dev loop1, logical block 0, async page read
[  108.765483][ T5339] loop3: detected capacity change from 0 to 1024
[  108.775589][ T3517]  loop1: unable to read partition table
[  109.241971][ T5346] loop5: detected capacity change from 0 to 1024
[  109.310012][ T5348] loop6: detected capacity change from 0 to 1024
[  109.369044][ T5352] loop4: detected capacity change from 0 to 1024
[  109.470230][ T5357] loop2: detected capacity change from 0 to 1024
[  109.664090][ T5368] loop0: detected capacity change from 0 to 1024
[  109.970915][ T5373] loop3: detected capacity change from 0 to 1024
[  110.008989][ T3517] I/O error, dev loop3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  110.018652][ T5374] loop1: detected capacity change from 0 to 1024
[  110.084638][ T3517] Buffer I/O error on dev loop3, logical block 0, async page read
[  110.094987][ T5379] loop0: detected capacity change from 0 to 1024
[  110.132396][ T3517]  loop3: unable to read partition table
[  110.355186][ T5387] loop5: detected capacity change from 0 to 1024
[  110.373003][ T3517] I/O error, dev loop5, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  110.396753][ T5390] loop7: detected capacity change from 0 to 1024
[  110.396769][ T5392] loop6: detected capacity change from 0 to 1024
[  110.417818][ T5391] loop4: detected capacity change from 0 to 1024
[  110.421165][ T5393] loop2: detected capacity change from 0 to 1024
[  110.433175][ T3517] Buffer I/O error on dev loop5, logical block 0, async page read
[  110.486877][ T3517]  loop5: unable to read partition table
2024/04/16 16:52:17 executed programs: 370
[  110.863647][ T5408] loop0: detected capacity change from 0 to 1024
[  110.984327][ T5412] loop3: detected capacity change from 0 to 1024
[  110.993286][ T5414] loop1: detected capacity change from 0 to 1024
[  111.071505][ T5416] loop6: detected capacity change from 0 to 1024
[  111.117292][   T27] kauditd_printk_skb: 31 callbacks suppressed
[  111.117306][   T27] audit: type=1804 audit(1713286337.472:369): pid=5418 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.1" name="/root/syzkaller-testdir1062981863/syzkaller.u6qaBt/47/bus" dev="sda1" ino=1992 res=1 errno=0
[  111.150825][ T5423] loop4: detected capacity change from 0 to 1024
[  111.170376][   T27] audit: type=1804 audit(1713286337.522:370): pid=5424 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.6" name="/root/syzkaller-testdir3286176162/syzkaller.J1X8FP/46/bus" dev="sda1" ino=1999 res=1 errno=0
[  111.237597][ T2972] I/O error, dev loop3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  111.250724][   T27] audit: type=1804 audit(1713286337.612:371): pid=5428 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.4" name="/root/syzkaller-testdir3222067680/syzkaller.EJSZM1/44/bus" dev="sda1" ino=1955 res=1 errno=0
[  111.293429][ T2972] Buffer I/O error on dev loop3, logical block 0, async page read
[  111.304616][ T2972] ldm_validate_partition_table(): Disk read failed.
[  111.313143][ T2972] Dev loop3: unable to read RDB block 0
[  111.366678][ T2972]  loop3: unable to read partition table
[  111.394080][ T2972] loop3: partition table beyond EOD, truncated
[  111.428826][ T5432] loop7: detected capacity change from 0 to 1024
[  111.472428][ T5435] loop2: detected capacity change from 0 to 1024
[  111.497965][ T5437] loop5: detected capacity change from 0 to 1024
[  111.575636][   T27] audit: type=1804 audit(1713286337.932:372): pid=5440 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.2" name="/root/syzkaller-testdir3292336804/syzkaller.i6osI5/45/bus" dev="sda1" ino=1983 res=1 errno=0
[  111.602667][   T27] audit: type=1804 audit(1713286337.932:373): pid=5432 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.7" name="/root/syzkaller-testdir3255321565/syzkaller.KLBqn9/46/file0/bus" dev="loop7" ino=18 res=1 errno=0
[  111.801429][   T27] audit: type=1804 audit(1713286338.082:374): pid=5437 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.5" name="/root/syzkaller-testdir4170142998/syzkaller.1QaWYO/47/file0/bus" dev="loop5" ino=18 res=1 errno=0
[  111.941817][ T5447] loop0: detected capacity change from 0 to 1024
[  111.951565][ T5445] loop3: detected capacity change from 0 to 1024
[  111.976464][ T5450] loop5: detected capacity change from 0 to 1024
[  111.983902][ T5451] loop1: detected capacity change from 0 to 1024
[  111.992063][ T2972] I/O error, dev loop3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  111.996667][   T27] audit: type=1804 audit(1713286338.122:375): pid=5442 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=ToMToU comm="syz-executor.5" name="/root/syzkaller-testdir4170142998/syzkaller.1QaWYO/47/file0/bus" dev="loop5" ino=18 res=1 errno=0
[  112.039519][ T2972] Buffer I/O error on dev loop3, logical block 0, async page read
[  112.062830][ T5459] loop6: detected capacity change from 0 to 1024
[  112.075419][ T2972]  loop3: unable to read partition table
[  112.137165][ T3517] I/O error, dev loop6, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  112.137975][   T27] audit: type=1804 audit(1713286338.372:376): pid=5452 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.3" name="/root/syzkaller-testdir2990492561/syzkaller.OAW3h1/47/bus" dev="sda1" ino=1967 res=1 errno=0
[  112.171851][   T27] audit: type=1804 audit(1713286338.412:377): pid=5453 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.0" name="/root/syzkaller-testdir3788737077/syzkaller.P4XkA3/49/bus" dev="sda1" ino=1988 res=1 errno=0
[  112.177460][ T3517] Buffer I/O error on dev loop6, logical block 0, async page read
[  112.200555][   T27] audit: type=1804 audit(1713286338.422:378): pid=5456 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.1" name="/root/syzkaller-testdir1062981863/syzkaller.u6qaBt/48/bus" dev="sda1" ino=1990 res=1 errno=0
[  112.253977][ T5468] loop4: detected capacity change from 0 to 1024
[  112.301553][ T3517]  loop6: unable to read partition table
[  112.418558][ T5473] loop7: detected capacity change from 0 to 1024
[  112.521730][ T5476] loop2: detected capacity change from 0 to 1024
[  112.920002][ T5483] loop0: detected capacity change from 0 to 1024
[  112.941846][ T5484] loop3: detected capacity change from 0 to 1024
[  112.995993][ T5490] loop1: detected capacity change from 0 to 1024
[  113.008895][ T5488] loop5: detected capacity change from 0 to 1024
[  113.102348][ T5493] loop7: detected capacity change from 0 to 1024
[  113.129294][ T2972] I/O error, dev loop5, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  113.146385][ T5499] loop6: detected capacity change from 0 to 1024
[  113.183252][ T2972] Buffer I/O error on dev loop5, logical block 0, async page read
[  113.218090][ T2972]  loop5: unable to read partition table
[  113.231587][ T5508] loop4: detected capacity change from 0 to 1024
[  113.518232][ T5515] loop2: detected capacity change from 0 to 1024
[  113.536391][ T5516] loop5: detected capacity change from 0 to 1024
[  113.926664][ T5522] loop0: detected capacity change from 0 to 1024
[  113.943840][ T5524] loop3: detected capacity change from 0 to 1024
[  114.044998][ T5529] loop1: detected capacity change from 0 to 1024
[  114.120322][ T5533] loop7: detected capacity change from 0 to 1024
[  114.129871][ T5534] loop2: detected capacity change from 0 to 1024
[  114.133062][ T5537] loop6: detected capacity change from 0 to 1024
[  114.213214][ T5544] loop4: detected capacity change from 0 to 1024
[  114.223052][ T3517] I/O error, dev loop6, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  114.251642][ T3517] Buffer I/O error on dev loop6, logical block 0, async page read
[  114.265801][ T3517]  loop6: unable to read partition table
[  114.762533][ T5555] loop5: detected capacity change from 0 to 1024
[  114.777828][ T3520] I/O error, dev loop5, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  114.877170][ T3520] Buffer I/O error on dev loop5, logical block 0, async page read
[  114.915158][ T5559] loop0: detected capacity change from 0 to 1024
[  114.949750][ T3520]  loop5: unable to read partition table
[  115.004639][ T3517] I/O error, dev loop0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  115.140063][ T3517] Buffer I/O error on dev loop0, logical block 0, async page read
[  115.220062][ T3517]  loop0: unable to read partition table
[  115.262395][ T5573] loop2: detected capacity change from 0 to 1024
[  115.295501][ T5576] loop6: detected capacity change from 0 to 1024
[  115.350631][ T4478] I/O error, dev loop6, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  115.394639][ T4478] Buffer I/O error on dev loop6, logical block 0, async page read
[  115.518432][ T4478]  loop6: unable to read partition table
2024/04/16 16:52:22 executed programs: 412
[  115.849174][ T5585] loop5: detected capacity change from 0 to 1024
[  115.858012][ T5586] loop7: detected capacity change from 0 to 1024
[  115.890424][ T3811] I/O error, dev loop7, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  115.960727][ T3811] Buffer I/O error on dev loop7, logical block 0, async page read
[  115.983703][ T5590] loop0: detected capacity change from 0 to 1024
[  115.998134][ T3917] I/O error, dev loop0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  116.058846][ T3917] Buffer I/O error on dev loop0, logical block 0, async page read
[  116.077278][ T5595] loop3: detected capacity change from 0 to 1024
[  116.078429][ T4478] I/O error, dev loop3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  116.090311][ T5596] loop4: detected capacity change from 0 to 1024
[  116.094129][ T3520] I/O error, dev loop4, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  116.109487][ T3811]  loop7: unable to read partition table
[  116.171982][ T5600] loop1: detected capacity change from 0 to 1024
[  116.179617][ T3813] I/O error, dev loop1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  116.189140][   T27] kauditd_printk_skb: 34 callbacks suppressed
[  116.189151][   T27] audit: type=1804 audit(1713286342.532:413): pid=5601 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.4" name="/root/syzkaller-testdir3222067680/syzkaller.EJSZM1/49/bus" dev="sda1" ino=1985 res=1 errno=0
[  116.233511][ T3917]  loop0: unable to read partition table
[  116.238003][ T5605] loop6: detected capacity change from 0 to 1024
[  116.286386][ T4478]  loop3: unable to read partition table
[  116.309349][ T3520] buffer_io_error: 1 callbacks suppressed
[  116.309366][ T3520] Buffer I/O error on dev loop4, logical block 0, async page read
[  116.378623][ T3813] Buffer I/O error on dev loop1, logical block 0, async page read
[  116.467247][ T3813]  loop1: unable to read partition table
[  116.472702][ T3520]  loop4: unable to read partition table
[  116.573092][   T27] audit: type=1804 audit(1713286342.552:414): pid=5602 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.3" name="/root/syzkaller-testdir2990492561/syzkaller.OAW3h1/51/bus" dev="sda1" ino=1986 res=1 errno=0
[  116.718103][ T5619] loop2: detected capacity change from 0 to 1024
[  116.833951][   T27] audit: type=1804 audit(1713286342.612:415): pid=5608 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.1" name="/root/syzkaller-testdir1062981863/syzkaller.u6qaBt/52/bus" dev="sda1" ino=1995 res=1 errno=0
[  116.878406][   T27] audit: type=1804 audit(1713286342.712:416): pid=5605 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.6" name="/root/syzkaller-testdir3286176162/syzkaller.J1X8FP/51/file0/bus" dev="loop6" ino=18 res=1 errno=0
[  117.024859][ T5627] loop7: detected capacity change from 0 to 1024
[  117.121296][ T5631] loop0: detected capacity change from 0 to 1024
[  117.133378][ T3917] I/O error, dev loop0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  117.153441][ T5633] loop4: detected capacity change from 0 to 1024
[  117.220653][   T27] audit: type=1804 audit(1713286343.182:417): pid=5621 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.2" name="/root/syzkaller-testdir3292336804/syzkaller.i6osI5/50/bus" dev="sda1" ino=1958 res=1 errno=0
[  117.251121][ T5637] loop1: detected capacity change from 0 to 1024
[  117.255168][ T3916] I/O error, dev loop1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  117.272066][ T5640] loop3: detected capacity change from 0 to 1024
[  117.288889][ T3917] Buffer I/O error on dev loop0, logical block 0, async page read
[  117.294444][ T3916] Buffer I/O error on dev loop1, logical block 0, async page read
[  117.311344][ T3916] I/O error, dev loop1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  117.324419][   T27] audit: type=1804 audit(1713286343.302:418): pid=5624 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.5" name="/root/syzkaller-testdir4170142998/syzkaller.1QaWYO/53/bus" dev="sda1" ino=1953 res=1 errno=0
[  117.377638][ T3917]  loop0: unable to read partition table
[  117.389506][ T5645] loop6: detected capacity change from 0 to 1024
[  117.394598][ T3916] Buffer I/O error on dev loop1, logical block 0, async page read
[  117.495273][ T3916]  loop1: unable to read partition table
[  117.583107][   T27] audit: type=1804 audit(1713286343.472:419): pid=5632 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.7" name="/root/syzkaller-testdir3255321565/syzkaller.KLBqn9/52/bus" dev="sda1" ino=1972 res=1 errno=0
[  117.699047][   T27] audit: type=1804 audit(1713286343.542:420): pid=5635 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.0" name="/root/syzkaller-testdir3788737077/syzkaller.P4XkA3/54/bus" dev="sda1" ino=1974 res=1 errno=0
[  117.808746][ T5656] loop3: detected capacity change from 0 to 1024
[  117.836495][ T3916] I/O error, dev loop3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  117.849714][ T5657] loop2: detected capacity change from 0 to 1024
[  117.921113][ T3916] Buffer I/O error on dev loop3, logical block 0, async page read
[  117.929430][   T27] audit: type=1804 audit(1713286343.652:421): pid=5641 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.4" name="/root/syzkaller-testdir3222067680/syzkaller.EJSZM1/50/bus" dev="sda1" ino=1986 res=1 errno=0
[  117.961559][ T5661] loop5: detected capacity change from 0 to 1024
[  117.994656][ T3916]  loop3: unable to read partition table
[  118.118899][ T5668] loop7: detected capacity change from 0 to 1024
[  118.132889][ T4478] I/O error, dev loop7, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  118.146444][ T5670] loop0: detected capacity change from 0 to 1024
[  118.159754][ T5672] loop4: detected capacity change from 0 to 1024
[  118.160184][ T3811] Buffer I/O error on dev loop4, logical block 0, async page read
[  118.212796][ T4478] Buffer I/O error on dev loop7, logical block 0, async page read
[  118.221741][   T27] audit: type=1804 audit(1713286343.712:422): pid=5644 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.1" name="/root/syzkaller-testdir1062981863/syzkaller.u6qaBt/53/bus" dev="sda1" ino=1994 res=1 errno=0
[  118.241507][ T4478]  loop7: unable to read partition table
[  118.262182][ T3811]  loop4: unable to read partition table
[  118.469146][ T5686] loop2: detected capacity change from 0 to 1024
[  118.478505][ T5687] loop1: detected capacity change from 0 to 1024
[  118.487219][ T5689] loop6: detected capacity change from 0 to 1024
[  118.523649][ T3916] Buffer I/O error on dev loop2, logical block 0, async page read
[  118.533139][ T2972] Buffer I/O error on dev loop6, logical block 0, async page read
[  118.545500][ T3916] ldm_validate_partition_table(): Disk read failed.
[  118.636967][ T3916]  loop2: unable to read partition table
[  118.650035][ T2972]  loop6: unable to read partition table
[  118.718059][ T5700] loop7: detected capacity change from 0 to 1024
[  118.977596][ T5705] loop3: detected capacity change from 0 to 1024
[  118.988966][ T5707] loop1: detected capacity change from 0 to 1024
[  118.996919][ T5708] loop5: detected capacity change from 0 to 1024
[  119.180053][ T5717] loop0: detected capacity change from 0 to 1024
[  119.252803][ T5718] loop4: detected capacity change from 0 to 1024
[  119.448823][ T5729] loop5: detected capacity change from 0 to 1024
[  119.463882][ T5730] loop2: detected capacity change from 0 to 1024
[  119.612166][ T5736] loop6: detected capacity change from 0 to 1024
[  119.663061][ T3711] ldm_validate_partition_table(): Disk read failed.
[  119.722387][ T3711]  loop6: unable to read partition table
[  119.807517][ T5742] loop7: detected capacity change from 0 to 1024
[  119.833024][ T5743] loop5: detected capacity change from 0 to 1024
[  119.836374][ T3517] ldm_validate_partition_table(): Disk read failed.
[  119.847393][ T3517] Dev loop5: unable to read RDB block 0
[  119.853812][ T3517]  loop5: unable to read partition table
[  119.871556][ T3535] EXT4-fs unmount: 348 callbacks suppressed
[  119.871574][ T3535] EXT4-fs (loop1): unmounting filesystem.
[  119.912817][ T3537] EXT4-fs (loop3): unmounting filesystem.
[  119.929154][ T5736] EXT4-fs (loop6): mounted filesystem without journal. Quota mode: writeback.
[  119.968979][ T3538] EXT4-fs (loop0): unmounting filesystem.
[  120.011692][ T5743] EXT4-fs (loop5): mounted filesystem without journal. Quota mode: writeback.
[  120.016979][ T5742] EXT4-fs (loop7): mounted filesystem without journal. Quota mode: writeback.
[  120.110886][ T5754] loop3: detected capacity change from 0 to 1024
[  120.144651][ T3711] ldm_validate_partition_table(): Disk read failed.
[  120.158155][ T5756] loop0: detected capacity change from 0 to 1024
[  120.165390][ T3711] Dev loop3: unable to read RDB block 0
[  120.181852][ T5757] loop1: detected capacity change from 0 to 1024
[  120.190873][ T3711]  loop3: unable to read partition table
[  120.190962][ T3642] EXT4-fs (loop4): unmounting filesystem.
[  120.221880][ T5756] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: writeback.
[  120.374731][ T3543] EXT4-fs (loop2): unmounting filesystem.
[  120.382040][ T5754] EXT4-fs (loop3): mounted filesystem without journal. Quota mode: writeback.
[  120.404878][ T5766] loop4: detected capacity change from 0 to 1024
[  120.418951][ T3917] ldm_validate_partition_table(): Disk read failed.
[  120.426514][ T5757] EXT4-fs (loop1): mounted filesystem without journal. Quota mode: writeback.
[  120.441160][ T3917] Dev loop4: unable to read RDB block 0
[  120.504470][ T3917]  loop4: unable to read partition table
[  120.512731][ T3542] EXT4-fs (loop6): unmounting filesystem.
[  120.577225][ T5772] loop2: detected capacity change from 0 to 1024
[  120.633474][ T5766] EXT4-fs (loop4): mounted filesystem without journal. Quota mode: writeback.
[  120.708370][ T3541] EXT4-fs (loop7): unmounting filesystem.
[  120.717066][ T5775] loop6: detected capacity change from 0 to 1024
[  120.730855][ T3539] EXT4-fs (loop5): unmounting filesystem.
[  120.824708][ T5775] EXT4-fs (loop6): mounted filesystem without journal. Quota mode: writeback.
[  120.907721][ T5782] loop7: detected capacity change from 0 to 1024
[  120.909931][ T5784] loop5: detected capacity change from 0 to 1024
[  120.926373][ T3917] blk_print_req_error: 59 callbacks suppressed
[  120.926389][ T3917] I/O error, dev loop5, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  120.952293][ T3538] EXT4-fs (loop0): unmounting filesystem.
2024/04/16 16:52:27 executed programs: 453
[  120.995660][ T5782] EXT4-fs (loop7): mounted filesystem without journal. Quota mode: writeback.
[  121.031910][ T3917]  loop5: unable to read partition table
[  121.085547][ T5790] loop0: detected capacity change from 0 to 1024
[  121.097592][ T3537] EXT4-fs (loop3): unmounting filesystem.
[  121.119230][ T5784] EXT4-fs (loop5): mounted filesystem without journal. Quota mode: writeback.
[  121.141407][ T3542] EXT4-fs (loop6): unmounting filesystem.
[  121.148443][ T3535] EXT4-fs (loop1): unmounting filesystem.
[  121.172240][ T5790] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: writeback.
[  121.311869][ T3642] EXT4-fs (loop4): unmounting filesystem.
[  121.316594][ T5800] loop6: detected capacity change from 0 to 1024
[  121.329583][ T5799] loop3: detected capacity change from 0 to 1024
[  121.338690][ T5801] loop1: detected capacity change from 0 to 1024
[  121.363164][ T3517] I/O error, dev loop3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  121.399737][   T27] kauditd_printk_skb: 31 callbacks suppressed
[  121.399752][   T27] audit: type=1804 audit(1713286347.752:454): pid=5804 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.6" name="/root/syzkaller-testdir3286176162/syzkaller.J1X8FP/56/bus" dev="sda1" ino=1986 res=1 errno=0
[  121.407743][ T3517] buffer_io_error: 57 callbacks suppressed
[  121.407760][ T3517] Buffer I/O error on dev loop3, logical block 0, async page read
[  121.451404][ T3517]  loop3: unable to read partition table
[  121.454424][ T5808] loop4: detected capacity change from 0 to 1024
[  121.483965][   T27] audit: type=1804 audit(1713286347.762:455): pid=5805 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.3" name="/root/syzkaller-testdir2990492561/syzkaller.OAW3h1/56/bus" dev="sda1" ino=1988 res=1 errno=0
[  121.526631][   T27] audit: type=1804 audit(1713286347.802:456): pid=5806 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.1" name="/root/syzkaller-testdir1062981863/syzkaller.u6qaBt/57/bus" dev="sda1" ino=1998 res=1 errno=0
[  121.557383][ T5799] EXT4-fs (loop3): mounted filesystem without journal. Quota mode: writeback.
[  121.585993][ T5814] loop2: detected capacity change from 0 to 1024
[  121.591533][ T5800] EXT4-fs (loop6): mounted filesystem without journal. Quota mode: writeback.
[  121.593755][ T2972] I/O error, dev loop2, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  121.618289][ T5808] EXT4-fs (loop4): mounted filesystem without journal. Quota mode: writeback.
[  121.628229][ T5801] EXT4-fs (loop1): mounted filesystem without journal. Quota mode: writeback.
[  121.655812][ T2972] Buffer I/O error on dev loop2, logical block 0, async page read
[  121.685712][   T27] audit: type=1804 audit(1713286348.042:457): pid=5817 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.2" name="/root/syzkaller-testdir3292336804/syzkaller.i6osI5/55/bus" dev="sda1" ino=1999 res=1 errno=0
[  121.719113][ T2972]  loop2: unable to read partition table
[  121.760986][ T3541] EXT4-fs (loop7): unmounting filesystem.
[  121.772184][   T27] audit: type=1804 audit(1713286348.082:458): pid=5808 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.4" name="/root/syzkaller-testdir3222067680/syzkaller.EJSZM1/54/file0/bus" dev="loop4" ino=18 res=1 errno=0
[  121.804987][ T3539] EXT4-fs (loop5): unmounting filesystem.
[  121.823732][ T5814] EXT4-fs (loop2): mounted filesystem without journal. Quota mode: writeback.
[  121.973352][ T5821] loop7: detected capacity change from 0 to 1024
[  121.988258][ T3538] EXT4-fs (loop0): unmounting filesystem.
[  121.995069][   T27] audit: type=1804 audit(1713286348.082:459): pid=5816 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=ToMToU comm="syz-executor.4" name="/root/syzkaller-testdir3222067680/syzkaller.EJSZM1/54/file0/bus" dev="loop4" ino=18 res=1 errno=0
[  122.002123][ T5823] loop5: detected capacity change from 0 to 1024
[  122.137163][ T3642] EXT4-fs (loop4): unmounting filesystem.
[  122.138512][ T5821] EXT4-fs (loop7): mounted filesystem without journal. Quota mode: writeback.
[  122.171418][ T3537] EXT4-fs (loop3): unmounting filesystem.
[  122.199581][ T5823] EXT4-fs (loop5): mounted filesystem without journal. Quota mode: writeback.
[  122.201109][   T27] audit: type=1804 audit(1713286348.452:460): pid=5824 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.7" name="/root/syzkaller-testdir3255321565/syzkaller.KLBqn9/57/bus" dev="sda1" ino=1976 res=1 errno=0
[  122.243617][ T5829] loop0: detected capacity change from 0 to 1024
[  122.256367][ T3542] EXT4-fs (loop6): unmounting filesystem.
[  122.262787][ T3535] EXT4-fs (loop1): unmounting filesystem.
[  122.287620][ T5833] loop3: detected capacity change from 0 to 1024
[  122.383362][ T5837] loop4: detected capacity change from 0 to 1024
[  122.406650][   T27] audit: type=1804 audit(1713286348.532:461): pid=5826 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.5" name="/root/syzkaller-testdir4170142998/syzkaller.1QaWYO/59/bus" dev="sda1" ino=1970 res=1 errno=0
[  122.429461][ T5842] loop1: detected capacity change from 0 to 1024
[  122.445187][ T5844] loop6: detected capacity change from 0 to 1024
[  122.477000][ T5833] EXT4-fs (loop3): mounted filesystem without journal. Quota mode: writeback.
[  122.513255][ T5842] EXT4-fs (loop1): mounted filesystem without journal. Quota mode: writeback.
[  122.525730][ T3543] EXT4-fs (loop2): unmounting filesystem.
[  122.535089][ T5837] EXT4-fs (loop4): mounted filesystem without journal. Quota mode: writeback.
[  122.566718][   T27] audit: type=1804 audit(1713286348.632:462): pid=5832 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.0" name="/root/syzkaller-testdir3788737077/syzkaller.P4XkA3/59/bus" dev="sda1" ino=1978 res=1 errno=0
[  122.610972][   T27] audit: type=1804 audit(1713286348.742:463): pid=5840 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.3" name="/root/syzkaller-testdir2990492561/syzkaller.OAW3h1/57/bus" dev="sda1" ino=1980 res=1 errno=0
[  122.648390][ T5844] EXT4-fs (loop6): mounted filesystem without journal. Quota mode: writeback.
[  122.764431][ T5855] loop2: detected capacity change from 0 to 1024
[  122.828703][ T3541] EXT4-fs (loop7): unmounting filesystem.
[  122.893253][ T3539] EXT4-fs (loop5): unmounting filesystem.
[  123.006948][ T5855] EXT4-fs (loop2): mounted filesystem without journal. Quota mode: writeback.
[  123.079181][ T5862] loop7: detected capacity change from 0 to 1024
[  123.156580][ T3917] I/O error, dev loop7, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  123.162724][ T5863] loop5: detected capacity change from 0 to 1024
[  123.189430][ T3711] I/O error, dev loop5, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  123.244759][ T3917] Buffer I/O error on dev loop7, logical block 0, async page read
[  123.264251][ T5867] loop0: detected capacity change from 0 to 1024
[  123.270391][ T3520] I/O error, dev loop0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  123.284496][ T3520] Buffer I/O error on dev loop0, logical block 0, async page read
[  123.306026][ T3711] Buffer I/O error on dev loop5, logical block 0, async page read
[  123.340620][ T3520] I/O error, dev loop0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  123.360284][ T3917]  loop7: unable to read partition table
[  123.362246][ T3535] EXT4-fs (loop1): unmounting filesystem.
[  123.393248][ T3711]  loop5: unable to read partition table
[  123.455015][ T3520] Buffer I/O error on dev loop0, logical block 0, async page read
[  123.500308][ T5862] EXT4-fs (loop7): mounted filesystem without journal. Quota mode: writeback.
[  123.528639][ T3520]  loop0: unable to read partition table
[  123.529599][ T3537] EXT4-fs (loop3): unmounting filesystem.
[  123.539103][ T3542] EXT4-fs (loop6): unmounting filesystem.
[  123.541159][ T3642] EXT4-fs (loop4): unmounting filesystem.
[  123.677453][ T3543] EXT4-fs (loop2): unmounting filesystem.
[  123.679102][ T5875] loop1: detected capacity change from 0 to 1024
[  123.725317][ T5875] EXT4-fs (loop1): mounted filesystem without journal. Quota mode: writeback.
[  123.738700][ T5878] loop6: detected capacity change from 0 to 1024
[  123.762960][ T5867] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: writeback.
[  123.886190][ T5887] loop2: detected capacity change from 0 to 1024
[  123.887442][ T2972] I/O error, dev loop2, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  123.899458][ T5883] loop4: detected capacity change from 0 to 1024
[  123.911470][ T5885] loop3: detected capacity change from 0 to 1024
[  123.919588][ T2972] Buffer I/O error on dev loop2, logical block 0, async page read
[  123.926538][ T5878] EXT4-fs (loop6): mounted filesystem without journal. Quota mode: writeback.
[  123.931404][ T2972]  loop2: unable to read partition table
[  123.965686][ T3541] EXT4-fs (loop7): unmounting filesystem.
[  123.989578][ T5892] loop5: detected capacity change from 0 to 1024
[  123.990965][ T5887] EXT4-fs (loop2): mounted filesystem without journal. Quota mode: writeback.
[  124.044418][ T5892] EXT4-fs (loop5): mounted filesystem without journal. Quota mode: writeback.
[  124.052774][ T5883] EXT4-fs (loop4): mounted filesystem without journal. Quota mode: writeback.
[  124.061891][ T5885] EXT4-fs (loop3): mounted filesystem without journal. Quota mode: writeback.
[  124.241244][ T3538] EXT4-fs (loop0): unmounting filesystem.
[  124.292073][ T5904] loop7: detected capacity change from 0 to 1024
[  124.361453][ T3543] EXT4-fs (loop2): unmounting filesystem.
[  124.449460][ T5904] EXT4-fs (loop7): mounted filesystem without journal. Quota mode: writeback.
[  124.481215][ T5908] loop0: detected capacity change from 0 to 1024
[  124.549766][ T5908] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: writeback.
[  124.602383][ T5912] loop2: detected capacity change from 0 to 1024
[  124.647096][ T3517] I/O error, dev loop2, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  124.717810][ T3517] Buffer I/O error on dev loop2, logical block 0, async page read
[  124.720444][ T5916] loop6: detected capacity change from 0 to 1024
[  124.739718][ T3711] I/O error, dev loop6, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  124.756481][ T5918] loop1: detected capacity change from 0 to 1024
[  124.765833][ T3517]  loop2: unable to read partition table
[  124.779608][ T3711] Buffer I/O error on dev loop6, logical block 0, async page read
[  124.942369][ T5927] loop4: detected capacity change from 0 to 1024
[  124.947789][ T3711] Buffer I/O error on dev loop6, logical block 0, async page read
[  124.981769][ T3711] ldm_validate_partition_table(): Disk read failed.
[  125.005722][ T3711] Dev loop6: unable to read RDB block 0
[  125.012626][ T3711]  loop6: unable to read partition table
[  125.018151][ T5932] loop3: detected capacity change from 0 to 1024
[  125.022617][ T3711] loop6: partition table beyond EOD, truncated
[  125.174186][ T5937] loop5: detected capacity change from 0 to 1024
[  125.223742][ T3711] ldm_validate_partition_table(): Disk read failed.
[  125.251432][ T3711]  loop5: unable to read partition table
[  125.416720][ T5942] loop0: detected capacity change from 0 to 1024
[  125.454797][ T5943] loop7: detected capacity change from 0 to 1024
[  125.609041][ T5949] loop2: detected capacity change from 0 to 1024
[  125.715951][ T5955] loop6: detected capacity change from 0 to 1024
[  125.781545][ T5957] loop1: detected capacity change from 0 to 1024
[  125.798210][ T3517] ldm_validate_partition_table(): Disk read failed.
[  125.824589][ T3517]  loop1: unable to read partition table
2024/04/16 16:52:32 executed programs: 490
[  126.052040][ T5965] loop4: detected capacity change from 0 to 1024
[  126.129763][ T5967] loop3: detected capacity change from 0 to 1024
[  126.146124][ T5970] loop5: detected capacity change from 0 to 1024
[  126.447156][ T5979] loop0: detected capacity change from 0 to 1024
[  126.497595][ T5981] loop7: detected capacity change from 0 to 1024
[  126.560921][   T27] kauditd_printk_skb: 28 callbacks suppressed
[  126.560935][   T27] audit: type=1804 audit(1713286352.922:492): pid=5979 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.0" name="/root/syzkaller-testdir3788737077/syzkaller.P4XkA3/63/file0/bus" dev="loop0" ino=18 res=1 errno=0
[  126.721266][ T5988] loop2: detected capacity change from 0 to 1024
[  126.737312][ T5990] loop6: detected capacity change from 0 to 1024
[  126.762676][ T2972] blk_print_req_error: 17 callbacks suppressed
[  126.762694][ T2972] I/O error, dev loop6, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  126.797005][   T27] audit: type=1804 audit(1713286352.972:493): pid=5984 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.7" name="/root/syzkaller-testdir3255321565/syzkaller.KLBqn9/61/bus" dev="sda1" ino=1972 res=1 errno=0
[  126.824413][ T5993] loop1: detected capacity change from 0 to 1024
[  126.878876][ T2972] buffer_io_error: 16 callbacks suppressed
[  126.878893][ T2972] Buffer I/O error on dev loop6, logical block 0, async page read
[  126.970329][ T2972]  loop6: unable to read partition table
[  126.981369][   T27] audit: type=1804 audit(1713286353.152:494): pid=5992 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.2" name="/root/syzkaller-testdir3292336804/syzkaller.i6osI5/60/bus" dev="sda1" ino=1986 res=1 errno=0
[  127.071242][ T6005] loop3: detected capacity change from 0 to 1024
[  127.125102][ T6004] loop4: detected capacity change from 0 to 1024
[  127.168878][ T6008] loop5: detected capacity change from 0 to 1024
[  127.198577][   T27] audit: type=1804 audit(1713286353.202:495): pid=5994 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.6" name="/root/syzkaller-testdir3286176162/syzkaller.J1X8FP/61/bus" dev="sda1" ino=1987 res=1 errno=0
[  127.286869][ T6015] loop0: detected capacity change from 0 to 1024
[  127.387915][   T27] audit: type=1804 audit(1713286353.272:496): pid=5998 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.1" name="/root/syzkaller-testdir1062981863/syzkaller.u6qaBt/62/bus" dev="sda1" ino=1967 res=1 errno=0
[  127.499110][ T6020] loop3: detected capacity change from 0 to 1024
[  127.547651][ T6022] loop7: detected capacity change from 0 to 1024
[  127.562604][   T27] audit: type=1804 audit(1713286353.552:497): pid=6009 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.4" name="/root/syzkaller-testdir3222067680/syzkaller.EJSZM1/59/bus" dev="sda1" ino=1958 res=1 errno=0
[  127.730233][ T6028] loop2: detected capacity change from 0 to 1024
[  127.776248][   T27] audit: type=1804 audit(1713286353.662:498): pid=6008 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.5" name="/root/syzkaller-testdir4170142998/syzkaller.1QaWYO/64/file0/bus" dev="loop5" ino=18 res=1 errno=0
[  127.810772][ T6031] loop6: detected capacity change from 0 to 1024
[  127.832643][ T6032] loop1: detected capacity change from 0 to 1024
[  127.885000][ T6036] loop5: detected capacity change from 0 to 1024
[  127.896565][ T2972] I/O error, dev loop5, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  127.928924][ T2972] Buffer I/O error on dev loop5, logical block 0, async page read
[  127.941892][   T27] audit: type=1804 audit(1713286353.782:499): pid=6018 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.0" name="/root/syzkaller-testdir3788737077/syzkaller.P4XkA3/64/bus" dev="sda1" ino=1960 res=1 errno=0
[  127.987466][   T27] audit: type=1804 audit(1713286353.982:500): pid=6024 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.3" name="/root/syzkaller-testdir2990492561/syzkaller.OAW3h1/62/bus" dev="sda1" ino=1976 res=1 errno=0
[  128.013425][   T27] audit: type=1804 audit(1713286354.022:501): pid=6022 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.7" name="/root/syzkaller-testdir3255321565/syzkaller.KLBqn9/62/file0/bus" dev="loop7" ino=18 res=1 errno=0
[  128.020962][ T2972]  loop5: unable to read partition table
[  128.116862][ T6045] loop4: detected capacity change from 0 to 1024
[  128.306913][ T6050] loop0: detected capacity change from 0 to 1024
[  128.518480][ T6054] loop7: detected capacity change from 0 to 1024
[  128.588115][ T6057] loop3: detected capacity change from 0 to 1024
[  128.679641][ T6060] loop0: detected capacity change from 0 to 1024
[  128.714338][ T2972] I/O error, dev loop0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  128.727274][ T6064] loop2: detected capacity change from 0 to 1024
[  128.746736][ T6066] loop6: detected capacity change from 0 to 1024
[  128.756178][ T2972] Buffer I/O error on dev loop0, logical block 0, async page read
[  128.796905][ T2972]  loop0: unable to read partition table
[  128.874838][ T6073] loop1: detected capacity change from 0 to 1024
[  128.933740][ T2972] I/O error, dev loop1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  128.944054][ T2972] Buffer I/O error on dev loop1, logical block 0, async page read
[  128.964643][ T6079] loop5: detected capacity change from 0 to 1024
[  128.973016][ T2972]  loop1: unable to read partition table
[  129.082095][ T6086] loop6: detected capacity change from 0 to 1024
[  129.092381][ T3517] I/O error, dev loop6, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  129.111988][ T3517] Buffer I/O error on dev loop6, logical block 0, async page read
[  129.113109][ T6088] loop4: detected capacity change from 0 to 1024
[  129.141563][ T3517] I/O error, dev loop6, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  129.199189][ T3517] Buffer I/O error on dev loop6, logical block 0, async page read
[  129.243511][ T3517]  loop6: unable to read partition table
[  129.487648][ T6095] loop7: detected capacity change from 0 to 1024
[  129.563221][ T6097] loop3: detected capacity change from 0 to 1024
[  129.891231][ T6109] loop4: detected capacity change from 0 to 1024
[  129.926755][ T6111] loop1: detected capacity change from 0 to 1024
[  129.956261][ T6113] loop2: detected capacity change from 0 to 1024
[  129.967651][ T6114] loop5: detected capacity change from 0 to 1024
[  130.018610][ T4478] I/O error, dev loop5, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  130.050497][ T4478] Buffer I/O error on dev loop5, logical block 0, async page read
[  130.110720][ T6123] loop6: detected capacity change from 0 to 1024
[  130.111423][ T4478]  loop5: unable to read partition table
[  130.560771][ T6136] loop7: detected capacity change from 0 to 1024
[  130.773687][ T6140] loop3: detected capacity change from 0 to 1024
[  130.823378][ T3917] I/O error, dev loop3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  130.845223][ T6142] loop0: detected capacity change from 0 to 1024
[  130.932473][ T3917] Buffer I/O error on dev loop3, logical block 0, async page read
[  130.974147][ T6151] loop4: detected capacity change from 0 to 1024
[  130.983462][ T3917]  loop3: unable to read partition table
[  131.014499][ T6154] loop5: detected capacity change from 0 to 1024
[  131.044453][ T3517] I/O error, dev loop5, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  131.112401][ T3517] Buffer I/O error on dev loop5, logical block 0, async page read
[  131.161714][ T3517]  loop5: unable to read partition table
[  131.169203][ T6162] loop6: detected capacity change from 0 to 1024
2024/04/16 16:52:37 executed programs: 533
[  131.735840][ T6170] loop7: detected capacity change from 0 to 1024
[  131.755858][ T4478] I/O error, dev loop7, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  131.832623][   T27] kauditd_printk_skb: 30 callbacks suppressed
[  131.832638][   T27] audit: type=1804 audit(1713286358.192:532): pid=6171 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.7" name="/root/syzkaller-testdir3255321565/syzkaller.KLBqn9/66/bus" dev="sda1" ino=1954 res=1 errno=0
[  131.892544][ T4478] Buffer I/O error on dev loop7, logical block 0, async page read
[  131.930372][ T6174] loop0: detected capacity change from 0 to 1024
[  131.962375][ T4478]  loop7: unable to read partition table
[  131.988048][ T6177] loop3: detected capacity change from 0 to 1024
[  132.011508][ T3711] I/O error, dev loop3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  132.038740][ T3711] Buffer I/O error on dev loop3, logical block 0, async page read
[  132.049143][ T6180] loop2: detected capacity change from 0 to 1024
[  132.069269][ T6179] loop1: detected capacity change from 0 to 1024
[  132.085385][   T27] audit: type=1804 audit(1713286358.392:533): pid=6182 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.0" name="/root/syzkaller-testdir3788737077/syzkaller.P4XkA3/69/bus" dev="sda1" ino=1977 res=1 errno=0
[  132.097526][ T3711]  loop3: unable to read partition table
[  132.183656][ T6191] loop5: detected capacity change from 0 to 1024
[  132.272752][ T6197] loop6: detected capacity change from 0 to 1024
[  132.303464][   T27] audit: type=1804 audit(1713286358.442:534): pid=6184 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.3" name="/root/syzkaller-testdir2990492561/syzkaller.OAW3h1/66/bus" dev="sda1" ino=1956 res=1 errno=0
[  132.340708][   T27] audit: type=1804 audit(1713286358.482:535): pid=6186 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.1" name="/root/syzkaller-testdir1062981863/syzkaller.u6qaBt/67/bus" dev="sda1" ino=1984 res=1 errno=0
[  132.366365][   T27] audit: type=1804 audit(1713286358.552:536): pid=6192 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.2" name="/root/syzkaller-testdir3292336804/syzkaller.i6osI5/65/bus" dev="sda1" ino=1989 res=1 errno=0
[  132.392085][   T27] audit: type=1804 audit(1713286358.562:537): pid=6188 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.4" name="/root/syzkaller-testdir3222067680/syzkaller.EJSZM1/64/bus" dev="sda1" ino=1991 res=1 errno=0
[  132.418178][   T27] audit: type=1804 audit(1713286358.632:538): pid=6198 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.5" name="/root/syzkaller-testdir4170142998/syzkaller.1QaWYO/69/bus" dev="sda1" ino=1997 res=1 errno=0
[  132.446339][   T27] audit: type=1804 audit(1713286358.762:539): pid=6205 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.6" name="/root/syzkaller-testdir3286176162/syzkaller.J1X8FP/67/bus" dev="sda1" ino=1999 res=1 errno=0
[  132.734181][ T6208] loop7: detected capacity change from 0 to 1024
[  132.779212][ T3711] I/O error, dev loop7, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  132.829563][ T3711] Buffer I/O error on dev loop7, logical block 0, async page read
[  132.836061][   T27] audit: type=1804 audit(1713286359.192:540): pid=6209 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.7" name="/root/syzkaller-testdir3255321565/syzkaller.KLBqn9/67/bus" dev="sda1" ino=1959 res=1 errno=0
[  132.840184][ T1234] ieee802154 phy0 wpan0: encryption failed: -22
[  132.869468][ T1234] ieee802154 phy1 wpan1: encryption failed: -22
[  132.909693][ T3711]  loop7: unable to read partition table
[  133.021237][ T6215] loop4: detected capacity change from 0 to 1024
[  133.021621][ T6213] loop3: detected capacity change from 0 to 1024
[  133.079274][ T3916] I/O error, dev loop3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  133.091126][ T3916] Buffer I/O error on dev loop3, logical block 0, async page read
[  133.104609][ T3916] I/O error, dev loop3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  133.119969][ T3916] Buffer I/O error on dev loop3, logical block 0, async page read
[  133.121384][   T27] audit: type=1804 audit(1713286359.452:541): pid=6215 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.4" name="/root/syzkaller-testdir3222067680/syzkaller.EJSZM1/65/file0/bus" dev="loop4" ino=18 res=1 errno=0
[  133.134064][ T3916] I/O error, dev loop3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  133.167796][ T6220] loop0: detected capacity change from 0 to 1024
[  133.174600][ T6218] loop2: detected capacity change from 0 to 1024
[  133.227087][ T6228] loop5: detected capacity change from 0 to 1024
[  133.240519][ T3917] I/O error, dev loop0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  133.250233][ T3917] Buffer I/O error on dev loop0, logical block 0, async page read
[  133.251978][ T3916] Buffer I/O error on dev loop3, logical block 0, async page read
[  133.258984][ T3711] I/O error, dev loop2, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  133.339270][ T6234] loop1: detected capacity change from 0 to 1024
[  133.350095][ T3711] Buffer I/O error on dev loop2, logical block 0, async page read
[  133.370117][ T3917]  loop0: unable to read partition table
[  133.440536][ T3711]  loop2: unable to read partition table
[  133.455193][ T3916] I/O error, dev loop3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  133.501670][ T3916] Buffer I/O error on dev loop3, logical block 0, async page read
[  133.510376][ T3916] ldm_validate_partition_table(): Disk read failed.
[  133.517702][ T3916] Dev loop3: unable to read RDB block 0
[  133.527476][ T3916]  loop3: unable to read partition table
[  133.529207][ T3711] I/O error, dev loop2, sector 32 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[  133.533832][ T3916] loop3: partition table beyond EOD, truncated
[  133.587425][ T6243] loop6: detected capacity change from 0 to 1024
[  133.601465][ T4478] I/O error, dev loop6, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  133.619854][ T4478] Buffer I/O error on dev loop6, logical block 0, async page read
[  133.661381][ T4478]  loop6: unable to read partition table
[  133.895233][ T6248] loop7: detected capacity change from 0 to 1024
[  134.002936][ T6252] loop4: detected capacity change from 0 to 1024
[  134.029745][ T6255] loop3: detected capacity change from 0 to 1024
[  134.065253][ T6258] loop2: detected capacity change from 0 to 1024
[  134.076697][ T6257] loop0: detected capacity change from 0 to 1024
[  134.387597][ T6269] loop5: detected capacity change from 0 to 1024
[  134.446087][ T6271] loop1: detected capacity change from 0 to 1024
[  134.455782][ T3517] ldm_validate_partition_table(): Disk read failed.
[  134.463514][ T3917] ldm_validate_partition_table(): Disk read failed.
[  134.475742][ T3917] Dev loop1: unable to read RDB block 0
[  134.494102][ T3517] Dev loop5: unable to read RDB block 0
[  134.534989][ T3517]  loop5: unable to read partition table
[  134.544481][ T3917]  loop1: unable to read partition table
[  134.614137][ T6278] loop6: detected capacity change from 0 to 1024
[  134.849284][ T6284] loop7: detected capacity change from 0 to 1024
[  134.968086][ T6288] loop1: detected capacity change from 0 to 1024
[  135.052878][ T6292] loop0: detected capacity change from 0 to 1024
[  135.063323][ T6295] loop4: detected capacity change from 0 to 1024
[  135.071319][ T2972] ldm_validate_partition_table(): Disk read failed.
[  135.090122][ T2972] Dev loop4: unable to read RDB block 0
[  135.097639][ T6298] loop2: detected capacity change from 0 to 1024
[  135.119738][ T2972]  loop4: unable to read partition table
[  135.126636][ T6300] loop3: detected capacity change from 0 to 1024
[  135.450646][ T6311] loop5: detected capacity change from 0 to 1024
[  135.688852][ T6315] loop6: detected capacity change from 0 to 1024
[  135.971230][ T6323] loop7: detected capacity change from 0 to 1024
[  136.011435][ T6325] loop1: detected capacity change from 0 to 1024
[  136.018250][ T6324] loop4: detected capacity change from 0 to 1024
[  136.259330][ T6336] loop0: detected capacity change from 0 to 1024
[  136.314695][ T4478] ldm_validate_partition_table(): Disk read failed.
[  136.314723][ T6338] loop2: detected capacity change from 0 to 1024
[  136.351790][ T4478]  loop0: unable to read partition table
[  136.359094][ T6339] loop3: detected capacity change from 0 to 1024
[  136.449029][ T3711] ldm_validate_partition_table(): Disk read failed.
[  136.498064][ T6348] loop5: detected capacity change from 0 to 1024
2024/04/16 16:52:42 executed programs: 572
[  136.554417][ T3711] Dev loop3: unable to read RDB block 0
[  136.588699][ T3711]  loop3: unable to read partition table
[  136.597839][ T3711] loop3: partition table beyond EOD, truncated
[  136.720956][ T6353] loop7: detected capacity change from 0 to 1024
[  136.763553][ T2972] ldm_validate_partition_table(): Disk read failed.
[  136.765955][ T6355] loop2: detected capacity change from 0 to 1024
[  136.800433][ T2972]  loop7: unable to read partition table
[  136.827052][ T6358] loop6: detected capacity change from 0 to 1024
[  136.868893][   T27] kauditd_printk_skb: 30 callbacks suppressed
[  136.868908][   T27] audit: type=1804 audit(1713286363.222:572): pid=6361 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.2" name="/root/syzkaller-testdir3292336804/syzkaller.i6osI5/70/bus" dev="sda1" ino=1962 res=1 errno=0
[  136.993436][ T6367] loop4: detected capacity change from 0 to 1024
[  137.012680][ T6369] loop1: detected capacity change from 0 to 1024
[  137.046940][   T27] audit: type=1804 audit(1713286363.282:573): pid=6365 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.6" name="/root/syzkaller-testdir3286176162/syzkaller.J1X8FP/71/bus" dev="sda1" ino=1964 res=1 errno=0
[  137.145857][   T27] audit: type=1804 audit(1713286363.452:574): pid=6371 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.1" name="/root/syzkaller-testdir1062981863/syzkaller.u6qaBt/72/bus" dev="sda1" ino=2000 res=1 errno=0
[  137.224067][   T27] audit: type=1804 audit(1713286363.462:575): pid=6370 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.4" name="/root/syzkaller-testdir3222067680/syzkaller.EJSZM1/69/bus" dev="sda1" ino=1999 res=1 errno=0
[  137.291408][ T6377] loop3: detected capacity change from 0 to 1024
[  137.348548][   T27] audit: type=1804 audit(1713286363.702:576): pid=6378 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.3" name="/root/syzkaller-testdir2990492561/syzkaller.OAW3h1/71/bus" dev="sda1" ino=1968 res=1 errno=0
[  137.441420][ T6382] loop0: detected capacity change from 0 to 1024
[  137.502039][ T6385] loop5: detected capacity change from 0 to 1024
[  137.533618][   T27] audit: type=1804 audit(1713286363.892:577): pid=6382 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.0" name="/root/syzkaller-testdir3788737077/syzkaller.P4XkA3/74/file0/bus" dev="loop0" ino=18 res=1 errno=0
[  137.697418][   T27] audit: type=1804 audit(1713286363.982:578): pid=6387 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.5" name="/root/syzkaller-testdir4170142998/syzkaller.1QaWYO/74/bus" dev="sda1" ino=1955 res=1 errno=0
[  137.790138][ T6392] loop2: detected capacity change from 0 to 1024
[  137.798546][ T6391] loop7: detected capacity change from 0 to 1024
[  137.808326][ T2972] blk_print_req_error: 66 callbacks suppressed
[  137.808341][ T2972] I/O error, dev loop7, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  137.865700][ T2972] buffer_io_error: 66 callbacks suppressed
[  137.866516][ T2972] Buffer I/O error on dev loop7, logical block 0, async page read
[  137.886013][   T27] audit: type=1804 audit(1713286364.242:579): pid=6396 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.2" name="/root/syzkaller-testdir3292336804/syzkaller.i6osI5/71/bus" dev="sda1" ino=1980 res=1 errno=0
[  137.887805][ T6394] loop6: detected capacity change from 0 to 1024
[  137.958234][   T27] audit: type=1804 audit(1713286364.282:580): pid=6395 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.7" name="/root/syzkaller-testdir3255321565/syzkaller.KLBqn9/72/bus" dev="sda1" ino=1982 res=1 errno=0
[  137.983558][ T2972]  loop7: unable to read partition table
[  138.075081][ T6403] loop4: detected capacity change from 0 to 1024
[  138.094032][ T6406] loop1: detected capacity change from 0 to 1024
[  138.134093][   T27] audit: type=1804 audit(1713286364.482:581): pid=6407 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz-executor.6" name="/root/syzkaller-testdir3286176162/syzkaller.J1X8FP/72/bus" dev="sda1" ino=1977 res=1 errno=0
[  138.218181][ T2972] I/O error, dev loop1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  138.241502][ T6413] loop0: detected capacity change from 0 to 1024
[  138.327500][ T2972] Buffer I/O error on dev loop1, logical block 0, async page read
[  138.353293][ T6417] loop3: detected capacity change from 0 to 1024
[  138.363712][ T2972]  loop1: unable to read partition table
[  138.544599][ T6423] loop5: detected capacity change from 0 to 1024
[  138.628053][ T6426] loop1: detected capacity change from 0 to 1024
[  138.865682][ T6431] loop7: detected capacity change from 0 to 1024
[  138.878794][ T6433] loop2: detected capacity change from 0 to 1024
[  139.143865][ T6440] loop6: detected capacity change from 0 to 1024
[  139.153897][ T6441] loop4: detected capacity change from 0 to 1024
[  139.250171][ T6445] loop3: detected capacity change from 0 to 1024
[  139.257629][ T6446] loop5: detected capacity change from 0 to 1024
[  139.333624][ T6453] loop0: detected capacity change from 0 to 1024
[  139.624810][ T6461] loop7: detected capacity change from 0 to 1024
[  139.769307][ T6464] loop1: detected capacity change from 0 to 1024
[  139.812869][ T2972] I/O error, dev loop1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  139.824437][ T6467] loop2: detected capacity change from 0 to 1024
[  139.852622][ T2972] Buffer I/O error on dev loop1, logical block 0, async page read
[  139.869691][ T2972]  loop1: unable to read partition table
[  140.048713][ T6476] loop6: detected capacity change from 0 to 1024
[  140.082396][ T6477] loop4: detected capacity change from 0 to 1024
[  140.251534][ T6485] loop5: detected capacity change from 0 to 1024
[  140.262335][ T6486] loop3: detected capacity change from 0 to 1024
[  140.280509][ T6488] loop7: detected capacity change from 0 to 1024
[  140.366246][ T6491] loop0: detected capacity change from 0 to 1024
[  140.703592][ T6501] loop1: detected capacity change from 0 to 1024
[  140.786742][ T6503] loop6: detected capacity change from 0 to 1024
[  140.856233][ T6507] loop2: detected capacity change from 0 to 1024
[  140.892989][ T2972] I/O error, dev loop2, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  140.903274][ T2972] Buffer I/O error on dev loop2, logical block 0, async page read
[  140.912475][ T2972] I/O error, dev loop2, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  140.927134][ T2972] Buffer I/O error on dev loop2, logical block 0, async page read
[  140.943700][ T2972] I/O error, dev loop2, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[  140.955034][ T2972] Buffer I/O error on dev loop2, logical block 0, async page read
[  141.006710][ T2972]  loop2: unable to read partition table
[  141.018549][ T6512] loop0: detected capacity change from 0 to 1024
[  141.061201][ T6515] loop4: detected capacity change from 0 to 1024
[  141.263622][ T6520] ------------[ cut here ]------------
[  141.269437][ T6520] kernel BUG at fs/ext4/mballoc.c:4294!
[  141.275124][ T6520] invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[  141.281212][ T6520] CPU: 1 PID: 6520 Comm: syz-executor.4 Not tainted 6.0.0-rc4-syzkaller-00010-gd412df530f77 #0
[  141.291637][ T6520] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
[  141.301704][ T6520] RIP: 0010:ext4_mb_use_inode_pa+0x64b/0x6b0
[  141.307741][ T6520] Code: 48 c7 c7 00 04 8b 8c 4c 89 e6 48 89 ea e8 ed f2 1c 02 e9 00 fd ff ff e8 43 3c 55 ff 0f 0b e8 3c 3c 55 ff 0f 0b e8 35 3c 55 ff <0f> 0b 48 8b 0c 24 80 e1 07 80 c1 03 38 c1 0f 8c 56 ff ff ff 48 8b
[  141.327358][ T6520] RSP: 0018:ffffc9000458e7f0 EFLAGS: 00010293
[  141.333421][ T6520] RAX: ffffffff822fca8b RBX: 00000000ffffffff RCX: ffff88807a4d3b00
[  141.341385][ T6520] RDX: 0000000000000000 RSI: 0000000000000003 RDI: 0000000000000002
[  141.349349][ T6520] RBP: 1ffff1100cc11481 R08: ffffffff822fc7ce R09: ffffed100cc1147f
[  141.357313][ T6520] R10: 0000000000000000 R11: dffffc0000000001 R12: 0000000000000040
[  141.365296][ T6520] R13: dffffc0000000000 R14: 0000000000000003 R15: ffff88806608a408
[  141.373545][ T6520] FS:  00007f463613b6c0(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
[  141.382469][ T6520] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  141.389046][ T6520] CR2: 0000000000000000 CR3: 000000006ba04000 CR4: 00000000003506e0
[  141.397036][ T6520] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  141.405019][ T6520] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  141.413167][ T6520] Call Trace:
[  141.416445][ T6520]  <TASK>
[  141.419433][ T6520]  ext4_mb_use_preallocated+0xc97/0xeb0
[  141.425175][ T6520]  ext4_mb_new_blocks+0x6a8/0x48f0
[  141.430286][ T6520]  ? slab_post_alloc_hook+0x6f/0x360
[  141.435587][ T6520]  ? ext4_find_extent+0x368/0xdd0
[  141.440621][ T6520]  ? ext4_mb_pa_callback+0xd0/0xd0
[  141.445738][ T6520]  ? rcu_read_lock_sched_held+0x87/0x110
[  141.451382][ T6520]  ? ext4_ext_search_right+0x394/0x860
[  141.456842][ T6520]  ? ext4_ext_check_overlap+0x37e/0x5b0
[  141.462484][ T6520]  ? ext4_ext_find_goal+0xec/0x1d0
[  141.467589][ T6520]  ext4_ext_map_blocks+0x1b0e/0x7580
[  141.472875][ T6520]  ? ext4_ext_release+0x10/0x10
[  141.477723][ T6520]  ? read_lock_is_recursive+0x10/0x10
[  141.483436][ T6520]  ? read_lock_is_recursive+0x10/0x10
[  141.488885][ T6520]  ? __might_sleep+0xb0/0xb0
[  141.493471][ T6520]  ? rcu_read_lock_sched_held+0x87/0x110
[  141.499093][ T6520]  ? __bpf_trace_rcu_stall_warning+0x10/0x10
[  141.505069][ T6520]  ? ext4_es_lookup_extent+0x4f7/0xc20
[  141.510785][ T6520]  ext4_map_blocks+0xa3d/0x1d00
[  141.515633][ T6520]  ? ext4_issue_zeroout+0x250/0x250
[  141.521005][ T6520]  ? ext4_journal_check_start+0x179/0x240
[  141.526718][ T6520]  ? __ext4_journal_start_sb+0x270/0x450
[  141.532404][ T6520]  ext4_iomap_begin+0x85c/0xc80
[  141.537362][ T6520]  ? ext4_alloc_da_blocks+0x330/0x330
[  141.542841][ T6520]  ? rcu_read_lock_sched_held+0x87/0x110
[  141.548477][ T6520]  ? __bpf_trace_rcu_stall_warning+0x10/0x10
[  141.554451][ T6520]  ? ext4_alloc_da_blocks+0x330/0x330
[  141.559901][ T6520]  iomap_iter+0x6d0/0x10c0
[  141.564312][ T6520]  __iomap_dio_rw+0x1685/0x2090
[  141.569178][ T6520]  ? ext4_blocks_for_truncate+0x270/0x270
[  141.574896][ T6520]  ? iomap_dio_complete_work+0x70/0x70
[  141.580352][ T6520]  ? __might_sleep+0xb0/0xb0
[  141.584931][ T6520]  ? rcu_read_lock_sched_held+0x87/0x110
[  141.590552][ T6520]  ? ext4_fc_replay_link_internal+0x370/0x370
[  141.596619][ T6520]  iomap_dio_rw+0x42/0xa0
[  141.600948][ T6520]  ext4_file_write_iter+0x1692/0x1ae0
[  141.606316][ T6520]  ? ext4_file_write_iter+0xdf1/0x1ae0
[  141.611773][ T6520]  ? ext4_file_read_iter+0x740/0x740
[  141.617054][ T6520]  ? end_current_label_crit_section+0x142/0x170
[  141.623299][ T6520]  ? common_file_perm+0x178/0x1d0
[  141.628341][ T6520]  ? fsnotify_perm+0x67/0x590
[  141.633025][ T6520]  do_iter_write+0x6b8/0xc20
[  141.637637][ T6520]  ? __bpf_trace_rcu_stall_warning+0x10/0x10
[  141.643613][ T6520]  ? vfs_iter_write+0xa0/0xa0
[  141.648286][ T6520]  ? vfs_iter_write+0x69/0xa0
[  141.652956][ T6520]  iter_file_splice_write+0x7d2/0xf80
[  141.658328][ T6520]  ? splice_from_pipe+0x200/0x200
[  141.663344][ T6520]  ? splice_shrink_spd+0xb0/0xb0
[  141.668273][ T6520]  ? slab_post_alloc_hook+0x298/0x360
[  141.673660][ T6520]  ? common_file_perm+0x178/0x1d0
[  141.678696][ T6520]  ? splice_from_pipe+0x200/0x200
[  141.683736][ T6520]  direct_splice_actor+0xe3/0x1c0
[  141.688757][ T6520]  splice_direct_to_actor+0x4c0/0xbd0
[  141.694231][ T6520]  ? do_splice_direct+0x3d0/0x3d0
[  141.699279][ T6520]  ? pipe_to_sendpage+0x350/0x350
[  141.704323][ T6520]  ? fsnotify_perm+0x67/0x590
[  141.709004][ T6520]  ? bpf_lsm_file_permission+0x5/0x10
[  141.714424][ T6520]  do_splice_direct+0x27e/0x3d0
[  141.719271][ T6520]  ? splice_direct_to_actor+0xbd0/0xbd0
[  141.724812][ T6520]  ? rcu_read_lock_any_held+0xb1/0x130
[  141.730267][ T6520]  do_sendfile+0x5c5/0xf50
[  141.734674][ T6520]  ? do_pwritev+0x340/0x340
[  141.739171][ T6520]  ? lockdep_hardirqs_on_prepare+0x414/0x770
[  141.745142][ T6520]  __se_sys_sendfile64+0x14f/0x1b0
[  141.750242][ T6520]  ? __x64_sys_sendfile64+0xa0/0xa0
[  141.755430][ T6520]  ? syscall_enter_from_user_mode+0x2e/0x2a0
[  141.761431][ T6520]  ? lockdep_hardirqs_on+0x8c/0x130
[  141.767077][ T6520]  ? syscall_enter_from_user_mode+0x2e/0x2a0
[  141.773059][ T6520]  do_syscall_64+0x3d/0xb0
[  141.777469][ T6520]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[  141.783365][ T6520] RIP: 0033:0x7f463507adf9
[  141.787771][ T6520] Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
[  141.807646][ T6520] RSP: 002b:00007f463613b0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
[  141.816057][ T6520] RAX: ffffffffffffffda RBX: 00007f463519c050 RCX: 00007f463507adf9
[  141.824039][ T6520] RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000004
[  141.832007][ T6520] RBP: 00007f46350d7567 R08: 0000000000000000 R09: 0000000000000000
[  141.839991][ T6520] R10: 00008400fffffffa R11: 0000000000000246 R12: 0000000000000000
[  141.847963][ T6520] R13: 000000000000006e R14: 00007f463519c050 R15: 00007fff1c54c168
[  141.855940][ T6520]  </TASK>
[  141.859036][ T6520] Modules linked in:
2024/04/16 16:52:48 executed programs: 613
[  141.863777][ T6520] ---[ end trace 0000000000000000 ]---
[  141.869265][ T6520] RIP: 0010:ext4_mb_use_inode_pa+0x64b/0x6b0
[  141.875301][ T6520] Code: 48 c7 c7 00 04 8b 8c 4c 89 e6 48 89 ea e8 ed f2 1c 02 e9 00 fd ff ff e8 43 3c 55 ff 0f 0b e8 3c 3c 55 ff 0f 0b e8 35 3c 55 ff <0f> 0b 48 8b 0c 24 80 e1 07 80 c1 03 38 c1 0f 8c 56 ff ff ff 48 8b
[  141.895039][ T6520] RSP: 0018:ffffc9000458e7f0 EFLAGS: 00010293
[  141.901178][ T6520] RAX: ffffffff822fca8b RBX: 00000000ffffffff RCX: ffff88807a4d3b00
[  141.909173][ T6520] RDX: 0000000000000000 RSI: 0000000000000003 RDI: 0000000000000002
[  141.917222][ T6520] RBP: 1ffff1100cc11481 R08: ffffffff822fc7ce R09: ffffed100cc1147f
[  141.925270][ T6520] R10: 0000000000000000 R11: dffffc0000000001 R12: 0000000000000040
[  141.933411][ T6520] R13: dffffc0000000000 R14: 0000000000000003 R15: ffff88806608a408
[  141.941518][ T6520] FS:  00007f463613b6c0(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
[  141.950503][ T6520] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  141.957106][ T6520] CR2: 0000000000000000 CR3: 000000006ba04000 CR4: 00000000003506e0
[  141.965171][ T6520] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  141.973230][ T6520] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  141.981270][ T6520] Kernel panic - not syncing: Fatal exception
[  141.987693][ T6520] Kernel Offset: disabled
[  141.992016][ T6520] Rebooting in 86400 seconds..
