Warning: Permanently added '10.128.0.102' (ED25519) to the list of known hosts.
2024/04/16 16:48:29 ignoring optional flag "sandboxArg"="0"
2024/04/16 16:48:29 parsed 1 programs
[   33.388157][ T4978] cgroup: Unknown subsys name 'net'
[   33.516380][ T4978] cgroup: Unknown subsys name 'rlimit'
2024/04/16 16:48:37 executed programs: 0
[   40.886845][ T4977] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=4977 'syz-execprog'
[   41.035849][   T45] Bluetooth: hci0: unexpected cc 0x0c03 length: 249 > 1
[   41.053057][ T5002] Bluetooth: hci1: unexpected cc 0x0c03 length: 249 > 1
[   41.064138][ T5006] Bluetooth: hci2: unexpected cc 0x0c03 length: 249 > 1
[   41.071282][ T5006] Bluetooth: hci0: unexpected cc 0x1003 length: 249 > 9
[   41.078647][ T5006] Bluetooth: hci1: unexpected cc 0x1003 length: 249 > 9
[   41.085714][ T5006] Bluetooth: hci0: unexpected cc 0x1001 length: 249 > 9
[   41.093012][ T5008] Bluetooth: hci3: unexpected cc 0x0c03 length: 249 > 1
[   41.096945][ T5013] Bluetooth: hci2: unexpected cc 0x1003 length: 249 > 9
[   41.103875][ T5021] Bluetooth: hci1: unexpected cc 0x1001 length: 249 > 9
[   41.108185][ T5013] Bluetooth: hci4: unexpected cc 0x0c03 length: 249 > 1
[   41.115199][ T5021] Bluetooth: hci3: unexpected cc 0x1003 length: 249 > 9
[   41.122220][ T5013] Bluetooth: hci6: unexpected cc 0x0c03 length: 249 > 1
[   41.129376][ T5021] Bluetooth: hci7: unexpected cc 0x0c03 length: 249 > 1
[   41.136157][ T5013] Bluetooth: hci2: unexpected cc 0x1001 length: 249 > 9
[   41.143219][ T5021] Bluetooth: hci3: unexpected cc 0x1001 length: 249 > 9
[   41.149972][ T5013] Bluetooth: hci4: unexpected cc 0x1003 length: 249 > 9
[   41.157047][ T5021] Bluetooth: hci0: unexpected cc 0x0c23 length: 249 > 4
[   41.163976][ T5013] Bluetooth: hci6: unexpected cc 0x1003 length: 249 > 9
[   41.171074][ T5021] Bluetooth: hci7: unexpected cc 0x1003 length: 249 > 9
[   41.177920][ T5013] Bluetooth: hci2: unexpected cc 0x0c23 length: 249 > 4
[   41.184926][ T5021] Bluetooth: hci4: unexpected cc 0x1001 length: 249 > 9
[   41.191642][ T5013] Bluetooth: hci1: unexpected cc 0x0c23 length: 249 > 4
[   41.198954][ T5021] Bluetooth: hci6: unexpected cc 0x1001 length: 249 > 9
[   41.205707][ T5013] Bluetooth: hci0: unexpected cc 0x0c25 length: 249 > 3
[   41.212910][ T5021] Bluetooth: hci1: unexpected cc 0x0c25 length: 249 > 3
[   41.222090][ T5013] Bluetooth: hci2: unexpected cc 0x0c25 length: 249 > 3
[   41.229096][ T5021] Bluetooth: hci0: unexpected cc 0x0c38 length: 249 > 2
[   41.235894][ T5013] Bluetooth: hci6: unexpected cc 0x0c23 length: 249 > 4
[   41.242895][ T5021] Bluetooth: hci1: unexpected cc 0x0c38 length: 249 > 2
[   41.249913][ T5013] Bluetooth: hci2: unexpected cc 0x0c38 length: 249 > 2
[   41.256931][ T5021] Bluetooth: hci4: unexpected cc 0x0c23 length: 249 > 4
[   41.263766][ T5013] Bluetooth: hci5: unexpected cc 0x0c03 length: 249 > 1
[   41.270918][ T4384] Bluetooth: hci6: unexpected cc 0x0c25 length: 249 > 3
[   41.277802][   T45] Bluetooth: hci4: unexpected cc 0x0c25 length: 249 > 3
[   41.284787][ T4384] Bluetooth: hci6: unexpected cc 0x0c38 length: 249 > 2
[   41.291778][   T45] Bluetooth: hci4: unexpected cc 0x0c38 length: 249 > 2
[   41.302682][ T4384] Bluetooth: hci5: unexpected cc 0x1003 length: 249 > 9
[   41.320729][ T5022] Bluetooth: hci7: unexpected cc 0x1001 length: 249 > 9
[   41.328006][ T5022] Bluetooth: hci7: unexpected cc 0x0c23 length: 249 > 4
[   41.333999][ T5013] Bluetooth: hci5: unexpected cc 0x1001 length: 249 > 9
[   41.335083][ T5022] Bluetooth: hci7: unexpected cc 0x0c25 length: 249 > 3
[   41.342214][ T5013] Bluetooth: hci5: unexpected cc 0x0c23 length: 249 > 4
[   41.349129][ T5022] Bluetooth: hci3: unexpected cc 0x0c23 length: 249 > 4
[   41.356132][ T5013] Bluetooth: hci5: unexpected cc 0x0c25 length: 249 > 3
[   41.363439][ T5022] Bluetooth: hci3: unexpected cc 0x0c25 length: 249 > 3
[   41.370263][ T5013] Bluetooth: hci5: unexpected cc 0x0c38 length: 249 > 2
[   41.391565][ T5013] Bluetooth: hci7: unexpected cc 0x0c38 length: 249 > 2
[   41.391597][ T5008] Bluetooth: hci3: unexpected cc 0x0c38 length: 249 > 2
[   41.475974][ T5012] chnl_net:caif_netlink_parms(): no params data found
[   41.538297][ T5010] chnl_net:caif_netlink_parms(): no params data found
[   41.560166][ T5012] bridge0: port 1(bridge_slave_0) entered blocking state
[   41.567265][ T5012] bridge0: port 1(bridge_slave_0) entered disabled state
[   41.574402][ T5012] bridge_slave_0: entered allmulticast mode
[   41.580571][ T5012] bridge_slave_0: entered promiscuous mode
[   41.588015][ T5012] bridge0: port 2(bridge_slave_1) entered blocking state
[   41.595233][ T5012] bridge0: port 2(bridge_slave_1) entered disabled state
[   41.602508][ T5012] bridge_slave_1: entered allmulticast mode
[   41.609338][ T5012] bridge_slave_1: entered promiscuous mode
[   41.651838][ T5001] chnl_net:caif_netlink_parms(): no params data found
[   41.674855][ T5012] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   41.707360][ T5012] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   41.719732][ T5007] chnl_net:caif_netlink_parms(): no params data found
[   41.738452][ T5001] bridge0: port 1(bridge_slave_0) entered blocking state
[   41.745731][ T5001] bridge0: port 1(bridge_slave_0) entered disabled state
[   41.752935][ T5001] bridge_slave_0: entered allmulticast mode
[   41.759378][ T5001] bridge_slave_0: entered promiscuous mode
[   41.766779][ T5001] bridge0: port 2(bridge_slave_1) entered blocking state
[   41.774021][ T5001] bridge0: port 2(bridge_slave_1) entered disabled state
[   41.781399][ T5001] bridge_slave_1: entered allmulticast mode
[   41.787809][ T5001] bridge_slave_1: entered promiscuous mode
[   41.796485][ T5010] bridge0: port 1(bridge_slave_0) entered blocking state
[   41.803666][ T5010] bridge0: port 1(bridge_slave_0) entered disabled state
[   41.810940][ T5010] bridge_slave_0: entered allmulticast mode
[   41.817216][ T5010] bridge_slave_0: entered promiscuous mode
[   41.826501][ T4996] chnl_net:caif_netlink_parms(): no params data found
[   41.837885][ T5011] chnl_net:caif_netlink_parms(): no params data found
[   41.852274][ T5010] bridge0: port 2(bridge_slave_1) entered blocking state
[   41.859490][ T5010] bridge0: port 2(bridge_slave_1) entered disabled state
[   41.866798][ T5010] bridge_slave_1: entered allmulticast mode
[   41.873069][ T5010] bridge_slave_1: entered promiscuous mode
[   41.886871][ T5010] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   41.899491][ T5015] chnl_net:caif_netlink_parms(): no params data found
[   41.909898][ T5012] team0: Port device team_slave_0 added
[   41.925254][ T5010] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   41.938556][ T5001] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   41.948393][ T5012] team0: Port device team_slave_1 added
[   41.959289][ T5007] bridge0: port 1(bridge_slave_0) entered blocking state
[   41.966400][ T5007] bridge0: port 1(bridge_slave_0) entered disabled state
[   41.973873][ T5007] bridge_slave_0: entered allmulticast mode
[   41.980322][ T5007] bridge_slave_0: entered promiscuous mode
[   41.989840][ T5004] chnl_net:caif_netlink_parms(): no params data found
[   42.003109][ T5001] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   42.017242][ T5007] bridge0: port 2(bridge_slave_1) entered blocking state
[   42.024407][ T5007] bridge0: port 2(bridge_slave_1) entered disabled state
[   42.031637][ T5007] bridge_slave_1: entered allmulticast mode
[   42.037899][ T5007] bridge_slave_1: entered promiscuous mode
[   42.051937][ T5010] team0: Port device team_slave_0 added
[   42.059419][ T5010] team0: Port device team_slave_1 added
[   42.069815][ T5012] batman_adv: batadv0: Adding interface: batadv_slave_0
[   42.077028][ T5012] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   42.103488][ T5012] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   42.121595][ T5011] bridge0: port 1(bridge_slave_0) entered blocking state
[   42.128823][ T5011] bridge0: port 1(bridge_slave_0) entered disabled state
[   42.136141][ T5011] bridge_slave_0: entered allmulticast mode
[   42.142388][ T5011] bridge_slave_0: entered promiscuous mode
[   42.152850][ T5007] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   42.167352][ T5001] team0: Port device team_slave_0 added
[   42.173219][ T5012] batman_adv: batadv0: Adding interface: batadv_slave_1
[   42.180189][ T5012] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   42.206205][ T5012] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   42.220296][ T4996] bridge0: port 1(bridge_slave_0) entered blocking state
[   42.227384][ T4996] bridge0: port 1(bridge_slave_0) entered disabled state
[   42.234676][ T4996] bridge_slave_0: entered allmulticast mode
[   42.240975][ T4996] bridge_slave_0: entered promiscuous mode
[   42.247207][ T5011] bridge0: port 2(bridge_slave_1) entered blocking state
[   42.254292][ T5011] bridge0: port 2(bridge_slave_1) entered disabled state
[   42.261413][ T5011] bridge_slave_1: entered allmulticast mode
[   42.267636][ T5011] bridge_slave_1: entered promiscuous mode
[   42.277480][ T5007] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   42.288903][ T5001] team0: Port device team_slave_1 added
[   42.303513][ T4996] bridge0: port 2(bridge_slave_1) entered blocking state
[   42.310638][ T4996] bridge0: port 2(bridge_slave_1) entered disabled state
[   42.317891][ T4996] bridge_slave_1: entered allmulticast mode
[   42.324218][ T4996] bridge_slave_1: entered promiscuous mode
[   42.338027][ T5010] batman_adv: batadv0: Adding interface: batadv_slave_0
[   42.345029][ T5010] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   42.371162][ T5010] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   42.382775][ T5010] batman_adv: batadv0: Adding interface: batadv_slave_1
[   42.389934][ T5010] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   42.416143][ T5010] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   42.429315][ T5004] bridge0: port 1(bridge_slave_0) entered blocking state
[   42.436436][ T5004] bridge0: port 1(bridge_slave_0) entered disabled state
[   42.443600][ T5004] bridge_slave_0: entered allmulticast mode
[   42.449866][ T5004] bridge_slave_0: entered promiscuous mode
[   42.458871][ T5011] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   42.468081][ T5015] bridge0: port 1(bridge_slave_0) entered blocking state
[   42.475253][ T5015] bridge0: port 1(bridge_slave_0) entered disabled state
[   42.482366][ T5015] bridge_slave_0: entered allmulticast mode
[   42.488960][ T5015] bridge_slave_0: entered promiscuous mode
[   42.503085][ T5001] batman_adv: batadv0: Adding interface: batadv_slave_0
[   42.510212][ T5001] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   42.536315][ T5001] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   42.547407][ T5004] bridge0: port 2(bridge_slave_1) entered blocking state
[   42.554623][ T5004] bridge0: port 2(bridge_slave_1) entered disabled state
[   42.561719][ T5004] bridge_slave_1: entered allmulticast mode
[   42.567960][ T5004] bridge_slave_1: entered promiscuous mode
[   42.576921][ T5011] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   42.589726][ T5015] bridge0: port 2(bridge_slave_1) entered blocking state
[   42.596811][ T5015] bridge0: port 2(bridge_slave_1) entered disabled state
[   42.603931][ T5015] bridge_slave_1: entered allmulticast mode
[   42.610701][ T5015] bridge_slave_1: entered promiscuous mode
[   42.617144][ T5007] team0: Port device team_slave_0 added
[   42.624673][ T5012] hsr_slave_0: entered promiscuous mode
[   42.630563][ T5012] hsr_slave_1: entered promiscuous mode
[   42.636520][ T5001] batman_adv: batadv0: Adding interface: batadv_slave_1
[   42.643457][ T5001] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   42.669549][ T5001] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   42.682761][ T4996] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   42.699208][ T5007] team0: Port device team_slave_1 added
[   42.710710][ T4996] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   42.720425][ T5011] team0: Port device team_slave_0 added
[   42.730874][ T5015] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   42.744866][ T5004] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   42.755420][ T5004] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   42.767285][ T5011] team0: Port device team_slave_1 added
[   42.773823][ T5010] hsr_slave_0: entered promiscuous mode
[   42.779824][ T5010] hsr_slave_1: entered promiscuous mode
[   42.785733][ T5010] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   42.793430][ T5010] Cannot create hsr debugfs directory
[   42.799468][ T5015] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   42.808722][ T5007] batman_adv: batadv0: Adding interface: batadv_slave_0
[   42.815704][ T5007] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   42.841614][ T5007] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   42.872831][ T5007] batman_adv: batadv0: Adding interface: batadv_slave_1
[   42.879879][ T5007] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   42.906135][ T5007] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   42.920388][ T5001] hsr_slave_0: entered promiscuous mode
[   42.926231][ T5001] hsr_slave_1: entered promiscuous mode
[   42.933435][ T5001] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   42.941191][ T5001] Cannot create hsr debugfs directory
[   42.949078][ T4996] team0: Port device team_slave_0 added
[   42.955054][ T5011] batman_adv: batadv0: Adding interface: batadv_slave_0
[   42.962078][ T5011] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   42.987983][ T5011] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   43.001607][ T5015] team0: Port device team_slave_0 added
[   43.009155][ T5015] team0: Port device team_slave_1 added
[   43.023978][ T5004] team0: Port device team_slave_0 added
[   43.029983][ T4996] team0: Port device team_slave_1 added
[   43.038210][ T5011] batman_adv: batadv0: Adding interface: batadv_slave_1
[   43.045573][ T5011] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   43.071830][ T5011] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   43.095566][ T5004] team0: Port device team_slave_1 added
[   43.110531][ T5015] batman_adv: batadv0: Adding interface: batadv_slave_0
[   43.117710][ T5015] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   43.143859][ T5015] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   43.156108][ T5015] batman_adv: batadv0: Adding interface: batadv_slave_1
[   43.163062][ T5015] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   43.189234][ T5015] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   43.202093][ T4996] batman_adv: batadv0: Adding interface: batadv_slave_0
[   43.209050][ T4996] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   43.235084][ T4996] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   43.247480][ T4996] batman_adv: batadv0: Adding interface: batadv_slave_1
[   43.254455][ T4996] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   43.280507][ T4996] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   43.296520][ T5007] hsr_slave_0: entered promiscuous mode
[   43.302421][ T5007] hsr_slave_1: entered promiscuous mode
[   43.308446][ T5007] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   43.316014][ T5007] Cannot create hsr debugfs directory
[   43.326459][ T5004] batman_adv: batadv0: Adding interface: batadv_slave_0
[   43.333516][ T5004] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   43.359677][ T5013] Bluetooth: hci6: command 0x0409 tx timeout
[   43.359917][ T5004] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   43.365719][ T5013] Bluetooth: hci1: command 0x0409 tx timeout
[   43.376429][ T5008] Bluetooth: hci0: command 0x0409 tx timeout
[   43.382224][ T5013] Bluetooth: hci4: command 0x0409 tx timeout
[   43.410308][ T5004] batman_adv: batadv0: Adding interface: batadv_slave_1
[   43.417275][ T5004] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   43.443661][ T5013] Bluetooth: hci3: command 0x0409 tx timeout
[   43.443666][ T5002] Bluetooth: hci7: command 0x0409 tx timeout
[   43.443681][ T5002] Bluetooth: hci5: command 0x0409 tx timeout
[   43.449678][ T5013] Bluetooth: hci2: command 0x0409 tx timeout
[   43.456445][ T5004] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   43.497048][ T5011] hsr_slave_0: entered promiscuous mode
[   43.502787][ T5011] hsr_slave_1: entered promiscuous mode
[   43.508697][ T5011] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   43.516738][ T5011] Cannot create hsr debugfs directory
[   43.536580][ T5015] hsr_slave_0: entered promiscuous mode
[   43.542493][ T5015] hsr_slave_1: entered promiscuous mode
[   43.548476][ T5015] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   43.556185][ T5015] Cannot create hsr debugfs directory
[   43.572698][ T4996] hsr_slave_0: entered promiscuous mode
[   43.578501][ T4996] hsr_slave_1: entered promiscuous mode
[   43.584457][ T4996] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   43.591992][ T4996] Cannot create hsr debugfs directory
[   43.601667][ T5012] netdevsim netdevsim6 netdevsim0: renamed from eth0
[   43.610179][ T5012] netdevsim netdevsim6 netdevsim1: renamed from eth1
[   43.634639][ T5012] netdevsim netdevsim6 netdevsim2: renamed from eth2
[   43.647085][ T5004] hsr_slave_0: entered promiscuous mode
[   43.653002][ T5004] hsr_slave_1: entered promiscuous mode
[   43.658895][ T5004] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   43.666547][ T5004] Cannot create hsr debugfs directory
[   43.680367][ T5012] netdevsim netdevsim6 netdevsim3: renamed from eth3
[   43.737223][ T5010] netdevsim netdevsim1 netdevsim0: renamed from eth0
[   43.759802][ T5010] netdevsim netdevsim1 netdevsim1: renamed from eth1
[   43.773617][ T5010] netdevsim netdevsim1 netdevsim2: renamed from eth2
[   43.785797][ T5001] netdevsim netdevsim4 netdevsim0: renamed from eth0
[   43.793183][ T5010] netdevsim netdevsim1 netdevsim3: renamed from eth3
[   43.804761][ T5001] netdevsim netdevsim4 netdevsim1: renamed from eth1
[   43.812782][ T5001] netdevsim netdevsim4 netdevsim2: renamed from eth2
[   43.826384][ T5001] netdevsim netdevsim4 netdevsim3: renamed from eth3
[   43.844578][ T5007] netdevsim netdevsim7 netdevsim0: renamed from eth0
[   43.852426][ T5007] netdevsim netdevsim7 netdevsim1: renamed from eth1
[   43.860273][ T5007] netdevsim netdevsim7 netdevsim2: renamed from eth2
[   43.876292][ T5012] 8021q: adding VLAN 0 to HW filter on device bond0
[   43.894165][ T4996] netdevsim netdevsim0 netdevsim0: renamed from eth0
[   43.901690][ T5007] netdevsim netdevsim7 netdevsim3: renamed from eth3
[   43.912583][ T5076] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   43.920242][ T5076] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   43.929154][ T4996] netdevsim netdevsim0 netdevsim1: renamed from eth1
[   43.949160][ T4996] netdevsim netdevsim0 netdevsim2: renamed from eth2
[   43.959591][ T5010] 8021q: adding VLAN 0 to HW filter on device bond0
[   43.968447][ T5012] 8021q: adding VLAN 0 to HW filter on device team0
[   43.975767][ T5011] netdevsim netdevsim2 netdevsim0: renamed from eth0
[   43.985990][ T4996] netdevsim netdevsim0 netdevsim3: renamed from eth3
[   44.000263][ T5011] netdevsim netdevsim2 netdevsim1: renamed from eth1
[   44.009911][ T5004] netdevsim netdevsim5 netdevsim0: renamed from eth0
[   44.021953][ T5079] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   44.029837][ T5079] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   44.043775][ T5012] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   44.054514][ T5012] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   44.066799][ T5011] netdevsim netdevsim2 netdevsim2: renamed from eth2
[   44.075069][ T5004] netdevsim netdevsim5 netdevsim1: renamed from eth1
[   44.082782][ T5010] 8021q: adding VLAN 0 to HW filter on device team0
[   44.090068][ T5079] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   44.098644][ T5079] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   44.106975][ T5079] bridge0: port 1(bridge_slave_0) entered blocking state
[   44.114020][ T5079] bridge0: port 1(bridge_slave_0) entered forwarding state
[   44.121470][ T5079] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   44.129856][ T5079] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   44.138940][ T5079] bridge0: port 2(bridge_slave_1) entered blocking state
[   44.145994][ T5079] bridge0: port 2(bridge_slave_1) entered forwarding state
[   44.153408][ T5079] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   44.161776][ T5079] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   44.170114][ T5079] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   44.178517][ T5079] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   44.186702][ T5079] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   44.194922][ T5079] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   44.203028][ T5079] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   44.211170][ T5079] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   44.219221][ T5079] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   44.227329][ T5079] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   44.235655][ T5079] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   44.243262][ T5079] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   44.251035][ T5079] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   44.270453][ T5011] netdevsim netdevsim2 netdevsim3: renamed from eth3
[   44.286504][ T5004] netdevsim netdevsim5 netdevsim2: renamed from eth2
[   44.297500][ T5001] 8021q: adding VLAN 0 to HW filter on device bond0
[   44.313344][ T5010] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   44.325025][ T5010] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   44.344710][ T5007] 8021q: adding VLAN 0 to HW filter on device bond0
[   44.356079][ T5015] netdevsim netdevsim3 netdevsim0: renamed from eth0
[   44.364309][ T5004] netdevsim netdevsim5 netdevsim3: renamed from eth3
[   44.371717][ T5078] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   44.380647][ T5078] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   44.389013][ T5078] bridge0: port 1(bridge_slave_0) entered blocking state
[   44.396095][ T5078] bridge0: port 1(bridge_slave_0) entered forwarding state
[   44.403749][ T5078] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   44.412427][ T5078] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   44.421957][ T5078] bridge0: port 2(bridge_slave_1) entered blocking state
[   44.429005][ T5078] bridge0: port 2(bridge_slave_1) entered forwarding state
[   44.436480][ T5078] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   44.444866][ T5078] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   44.453057][ T5078] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   44.461283][ T5078] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   44.469459][ T5078] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   44.477708][ T5078] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   44.485817][ T5078] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   44.494179][ T5078] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   44.502373][ T5078] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   44.510497][ T5078] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   44.520755][ T5001] 8021q: adding VLAN 0 to HW filter on device team0
[   44.537636][ T5015] netdevsim netdevsim3 netdevsim1: renamed from eth1
[   44.545621][ T5076] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   44.553439][ T5076] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   44.561372][ T5076] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   44.568838][ T5076] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   44.576274][ T5076] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   44.596893][ T4996] 8021q: adding VLAN 0 to HW filter on device bond0
[   44.603672][ T5015] netdevsim netdevsim3 netdevsim2: renamed from eth2
[   44.611631][ T5015] netdevsim netdevsim3 netdevsim3: renamed from eth3
[   44.621563][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   44.630690][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   44.639476][ T5080] bridge0: port 1(bridge_slave_0) entered blocking state
[   44.646541][ T5080] bridge0: port 1(bridge_slave_0) entered forwarding state
[   44.654273][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   44.662665][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   44.671244][ T5080] bridge0: port 2(bridge_slave_1) entered blocking state
[   44.678315][ T5080] bridge0: port 2(bridge_slave_1) entered forwarding state
[   44.685765][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   44.694162][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   44.702526][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   44.710765][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   44.718969][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   44.727500][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   44.735630][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   44.742948][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   44.767313][ T5012] 8021q: adding VLAN 0 to HW filter on device batadv0
[   44.777468][ T4996] 8021q: adding VLAN 0 to HW filter on device team0
[   44.786875][ T5007] 8021q: adding VLAN 0 to HW filter on device team0
[   44.795400][ T5001] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   44.805863][ T5001] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   44.832955][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   44.840693][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   44.849038][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   44.857192][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   44.865357][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   44.873366][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   44.881394][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   44.889038][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   44.896606][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   44.904097][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   44.911624][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   44.920070][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   44.928357][ T5091] bridge0: port 1(bridge_slave_0) entered blocking state
[   44.935421][ T5091] bridge0: port 1(bridge_slave_0) entered forwarding state
[   44.942936][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   44.951501][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   44.959791][ T5091] bridge0: port 1(bridge_slave_0) entered blocking state
[   44.967307][ T5091] bridge0: port 1(bridge_slave_0) entered forwarding state
[   44.974828][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   44.983205][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   44.991485][ T5091] bridge0: port 2(bridge_slave_1) entered blocking state
[   44.998541][ T5091] bridge0: port 2(bridge_slave_1) entered forwarding state
[   45.006032][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   45.014552][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   45.022854][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   45.031201][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   45.039396][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   45.047699][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   45.055912][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   45.064089][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   45.077968][ T5007] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   45.088462][ T5007] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   45.106776][ T4996] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   45.117684][ T4996] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   45.130135][ T5011] 8021q: adding VLAN 0 to HW filter on device bond0
[   45.137416][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   45.145523][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   45.153176][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   45.161016][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   45.168764][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   45.177320][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   45.185540][ T5091] bridge0: port 2(bridge_slave_1) entered blocking state
[   45.192605][ T5091] bridge0: port 2(bridge_slave_1) entered forwarding state
[   45.200116][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   45.208419][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   45.216724][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   45.224911][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   45.233006][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   45.241320][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   45.249520][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   45.257694][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   45.265751][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   45.273782][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   45.281810][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   45.289965][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   45.298089][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   45.305537][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   45.315106][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   45.322829][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   45.335056][ T5010] 8021q: adding VLAN 0 to HW filter on device batadv0
[   45.356535][ T5004] 8021q: adding VLAN 0 to HW filter on device bond0
[   45.369245][ T5011] 8021q: adding VLAN 0 to HW filter on device team0
[   45.377595][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   45.386841][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   45.395411][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   45.402827][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   45.413439][ T5015] 8021q: adding VLAN 0 to HW filter on device bond0
[   45.426974][ T5004] 8021q: adding VLAN 0 to HW filter on device team0
[   45.434052][ T5002] Bluetooth: hci0: command 0x041b tx timeout
[   45.440181][ T5002] Bluetooth: hci1: command 0x041b tx timeout
[   45.442683][ T5011] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   45.446216][ T5013] Bluetooth: hci6: command 0x041b tx timeout
[   45.457526][ T5008] Bluetooth: hci4: command 0x041b tx timeout
[   45.465302][ T5011] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   45.481889][ T5007] 8021q: adding VLAN 0 to HW filter on device batadv0
[   45.489832][ T5012] veth0_vlan: entered promiscuous mode
[   45.495936][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   45.510879][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   45.518801][ T5008] Bluetooth: hci2: command 0x041b tx timeout
[   45.519437][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   45.524868][ T5020] Bluetooth: hci3: command 0x041b tx timeout
[   45.532882][ T5002] Bluetooth: hci5: command 0x041b tx timeout
[   45.540450][ T5013] Bluetooth: hci7: command 0x041b tx timeout
[   45.545681][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   45.559790][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   45.567467][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   45.574991][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   45.583459][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   45.591718][ T5077] bridge0: port 1(bridge_slave_0) entered blocking state
[   45.598761][ T5077] bridge0: port 1(bridge_slave_0) entered forwarding state
[   45.606407][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   45.614825][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   45.623066][ T5077] bridge0: port 2(bridge_slave_1) entered blocking state
[   45.630306][ T5077] bridge0: port 2(bridge_slave_1) entered forwarding state
[   45.637813][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   45.646302][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   45.654723][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   45.662980][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   45.671274][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   45.679473][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   45.687774][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   45.696296][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   45.704523][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   45.712699][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   45.720799][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   45.728345][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   45.735825][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   45.743307][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   45.750810][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   45.758519][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   45.766083][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   45.776375][ T5001] 8021q: adding VLAN 0 to HW filter on device batadv0
[   45.784486][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   45.791915][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   45.803818][ T5010] veth0_vlan: entered promiscuous mode
[   45.812075][ T5010] veth1_vlan: entered promiscuous mode
[   45.819839][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   45.828679][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   45.837619][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   45.847276][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   45.858620][ T5015] 8021q: adding VLAN 0 to HW filter on device team0
[   45.873464][ T5012] veth1_vlan: entered promiscuous mode
[   45.884835][ T4996] 8021q: adding VLAN 0 to HW filter on device batadv0
[   45.898137][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   45.906145][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   45.913888][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   45.922547][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   45.931112][ T5077] bridge0: port 1(bridge_slave_0) entered blocking state
[   45.938711][ T5077] bridge0: port 1(bridge_slave_0) entered forwarding state
[   45.946297][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   45.953826][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   45.961576][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   45.970090][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   45.978403][ T5077] bridge0: port 2(bridge_slave_1) entered blocking state
[   45.985456][ T5077] bridge0: port 2(bridge_slave_1) entered forwarding state
[   45.992892][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   46.000734][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   46.008271][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   46.016807][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   46.025106][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   46.033372][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   46.048638][ T5010] veth0_macvtap: entered promiscuous mode
[   46.063773][ T5010] veth1_macvtap: entered promiscuous mode
[   46.071957][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   46.079877][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   46.087563][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   46.096241][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   46.104514][ T5091] bridge0: port 1(bridge_slave_0) entered blocking state
[   46.111653][ T5091] bridge0: port 1(bridge_slave_0) entered forwarding state
[   46.119320][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   46.127743][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   46.136018][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   46.143780][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   46.152324][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   46.160798][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   46.169257][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   46.188029][ T5011] 8021q: adding VLAN 0 to HW filter on device batadv0
[   46.197459][ T4996] veth0_vlan: entered promiscuous mode
[   46.205459][ T4996] veth1_vlan: entered promiscuous mode
[   46.212709][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   46.220711][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   46.228694][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   46.237078][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   46.245351][ T5080] bridge0: port 2(bridge_slave_1) entered blocking state
[   46.252645][ T5080] bridge0: port 2(bridge_slave_1) entered forwarding state
[   46.260234][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   46.268728][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   46.277238][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   46.285479][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   46.293654][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   46.302049][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   46.310299][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   46.319856][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   46.328061][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   46.335500][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   46.342824][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   46.350896][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   46.359096][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   46.367187][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   46.375150][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   46.383287][ T5080] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   46.393261][ T5015] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   46.405050][ T5015] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   46.414803][ T5004] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   46.425749][ T5004] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   46.438665][ T5001] veth0_vlan: entered promiscuous mode
[   46.446807][ T5010] batman_adv: batadv0: Interface activated: batadv_slave_0
[   46.454889][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   46.462515][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   46.470211][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   46.478236][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   46.486460][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   46.494679][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   46.502805][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   46.511028][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   46.519887][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   46.528448][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   46.536547][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   46.544842][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   46.553341][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   46.562174][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   46.570652][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   46.581105][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   46.588870][ T5077] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   46.601688][ T5007] veth0_vlan: entered promiscuous mode
[   46.612257][ T5007] veth1_vlan: entered promiscuous mode
[   46.619818][ T5010] batman_adv: batadv0: Interface activated: batadv_slave_1
[   46.628356][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   46.637343][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   46.646622][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   46.654492][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   46.662642][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   46.670946][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   46.679297][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   46.688675][ T5012] veth0_macvtap: entered promiscuous mode
[   46.695516][ T5001] veth1_vlan: entered promiscuous mode
[   46.705815][ T4996] veth0_macvtap: entered promiscuous mode
[   46.712473][ T5010] netdevsim netdevsim1 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   46.721726][ T5010] netdevsim netdevsim1 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   46.730784][ T5010] netdevsim netdevsim1 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   46.739663][ T5010] netdevsim netdevsim1 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   46.749839][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   46.757901][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   46.765459][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   46.772915][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   46.780988][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   46.789252][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   46.798302][ T5012] veth1_macvtap: entered promiscuous mode
[   46.812137][ T5007] veth0_macvtap: entered promiscuous mode
[   46.821741][ T5011] veth0_vlan: entered promiscuous mode
[   46.833264][ T4996] veth1_macvtap: entered promiscuous mode
[   46.847686][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   46.855912][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   46.863792][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   46.871817][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   46.880223][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   46.888309][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   46.897040][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   46.905471][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   46.913665][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   46.921996][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   46.930552][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   46.939154][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   46.947189][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   46.955417][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   46.962821][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   46.973806][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   46.981971][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   46.989724][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   46.997806][ T5001] veth0_macvtap: entered promiscuous mode
[   47.005379][ T5007] veth1_macvtap: entered promiscuous mode
[   47.013782][ T5007] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   47.026746][ T5007] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   47.037334][ T5007] batman_adv: batadv0: Interface activated: batadv_slave_0
[   47.046626][ T5011] veth1_vlan: entered promiscuous mode
[   47.055344][ T5004] 8021q: adding VLAN 0 to HW filter on device batadv0
[   47.067779][ T5012] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   47.078941][ T5012] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   47.089406][ T5012] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   47.099902][ T5012] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   47.110300][ T5012] batman_adv: batadv0: Interface activated: batadv_slave_0
[   47.118297][ T5001] veth1_macvtap: entered promiscuous mode
[   47.125159][ T1757] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   47.132911][ T1757] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   47.141288][ T1757] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   47.149928][ T1757] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   47.157832][ T1757] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   47.165246][ T1757] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   47.173615][ T1757] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   47.183321][ T5015] 8021q: adding VLAN 0 to HW filter on device batadv0
[   47.194983][ T5012] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   47.205950][ T5012] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   47.216585][ T5012] batman_adv: batadv0: Interface activated: batadv_slave_1
[   47.224069][ T5007] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   47.234737][ T5007] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   47.244996][ T5007] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   47.255638][ T5007] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   47.266446][ T5007] batman_adv: batadv0: Interface activated: batadv_slave_1
[   47.277031][ T4996] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   47.287734][ T4996] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   47.297785][ T4996] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   47.308523][ T4996] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   47.318357][ T4996] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   47.329141][ T4996] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   47.342160][ T4996] batman_adv: batadv0: Interface activated: batadv_slave_0
[   47.354441][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   47.363025][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   47.371925][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   47.380443][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   47.388971][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   47.397585][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   47.407912][ T5012] netdevsim netdevsim6 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   47.416798][ T5012] netdevsim netdevsim6 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   47.425771][ T5012] netdevsim netdevsim6 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   47.434794][ T5012] netdevsim netdevsim6 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   47.446044][ T5007] netdevsim netdevsim7 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   47.455041][ T5007] netdevsim netdevsim7 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   47.463715][ T5007] netdevsim netdevsim7 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   47.472863][ T5007] netdevsim netdevsim7 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   47.489920][ T5001] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   47.500577][ T5001] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   47.510906][ T5001] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   47.514458][ T5020] Bluetooth: hci1: command 0x040f tx timeout
[   47.521606][ T5013] Bluetooth: hci6: command 0x040f tx timeout
[   47.527515][ T5002] Bluetooth: hci0: command 0x040f tx timeout
[   47.533539][ T5008] Bluetooth: hci4: command 0x040f tx timeout
[   47.541451][ T5001] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   47.557026][ T5001] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   47.567581][ T5001] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   47.577896][ T5001] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   47.588862][ T5001] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   47.598778][ T5020] Bluetooth: hci5: command 0x040f tx timeout
[   47.600195][ T5001] batman_adv: batadv0: Interface activated: batadv_slave_0
[   47.605159][ T5022] Bluetooth: hci7: command 0x040f tx timeout
[   47.616393][ T5020] Bluetooth: hci3: command 0x040f tx timeout
[   47.618622][ T5022] Bluetooth: hci2: command 0x040f tx timeout
[   47.628392][ T5011] veth0_macvtap: entered promiscuous mode
[   47.640154][ T5015] veth0_vlan: entered promiscuous mode
[   47.654645][    T8] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   47.662488][    T8] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   47.663858][ T1757] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   47.678805][ T1757] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   47.687359][ T1757] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   47.695673][ T1757] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   47.704241][ T1757] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   47.712638][ T1757] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   47.721245][ T1757] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   47.729314][ T1757] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   47.737559][ T1757] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   47.745355][ T1757] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   47.754377][ T1757] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   47.763489][ T5001] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   47.775243][ T5001] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   47.785439][ T5001] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   47.795975][ T5001] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   47.806075][ T5001] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   47.816582][ T5001] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   47.827140][ T5001] batman_adv: batadv0: Interface activated: batadv_slave_1
[   47.835767][ T4996] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   47.846778][ T4996] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   47.856949][ T4996] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   47.867580][ T4996] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   47.877517][ T4996] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   47.888573][ T4996] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   47.898578][ T4996] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   47.909261][ T4996] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   47.919782][ T4996] batman_adv: batadv0: Interface activated: batadv_slave_1
[   47.930885][ T5015] veth1_vlan: entered promiscuous mode
[   47.942292][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   47.950263][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   47.958004][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   47.965715][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   47.973760][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   47.982211][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   47.990568][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   47.999024][ T5091] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   48.007840][ T5011] veth1_macvtap: entered promiscuous mode
[   48.014885][ T5001] netdevsim netdevsim4 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   48.023592][ T5001] netdevsim netdevsim4 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   48.032299][ T5001] netdevsim netdevsim4 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   48.041198][ T5001] netdevsim netdevsim4 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   48.052645][   T53] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   48.061667][   T53] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   48.069018][    T8] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   48.078123][ T4996] netdevsim netdevsim0 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   48.081395][    T8] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   48.087125][ T4996] netdevsim netdevsim0 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   48.103218][ T4996] netdevsim netdevsim0 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   48.112488][ T4996] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   48.126075][ T5004] veth0_vlan: entered promiscuous mode
[   48.133773][ T4781] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   48.141719][ T4781] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   48.149528][ T4781] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   48.157634][ T4781] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   48.169528][   T53] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   48.178358][   T53] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   48.192828][ T5004] veth1_vlan: entered promiscuous mode
[   48.203269][ T4781] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   48.211540][ T4781] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   48.219394][ T4781] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   48.227241][ T4781] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   48.237122][ T5011] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   48.247975][ T5011] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.258011][ T5011] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   48.268555][ T5011] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.278563][ T5011] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   48.289273][ T5011] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.299268][ T5011] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   48.309966][ T5011] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.319937][ T5011] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   48.330444][ T5011] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.341413][ T5011] batman_adv: batadv0: Interface activated: batadv_slave_0
[   48.352291][   T25] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   48.363427][   T25] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   48.372181][ T5076] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   48.380843][ T5076] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   48.389449][ T5076] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   48.398155][ T5076] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   48.410785][ T5015] veth0_macvtap: entered promiscuous mode
[   48.418524][ T5011] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   48.429064][ T5011] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.441065][ T5011] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   48.451637][ T5011] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.462174][ T5011] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   48.472741][ T5011] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.482873][ T5011] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   48.493548][ T5011] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.503469][ T5011] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   48.514073][ T5011] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.524717][ T5011] batman_adv: batadv0: Interface activated: batadv_slave_1
[   48.535737][ T5078] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   48.544681][ T5078] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   48.552939][ T5078] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   48.562212][ T5078] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   48.570957][ T5078] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   48.580794][ T5004] veth0_macvtap: entered promiscuous mode
[   48.587594][ T5015] veth1_macvtap: entered promiscuous mode
[   48.597998][ T5079] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   48.605800][ T5079] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   48.614369][ T5079] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   48.622905][ T5079] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   48.631674][ T5011] netdevsim netdevsim2 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   48.633991][   T43] usb 2-1: new high-speed USB device number 2 using dummy_hcd
[   48.640659][ T5011] netdevsim netdevsim2 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   48.656790][ T5011] netdevsim netdevsim2 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   48.665647][ T5011] netdevsim netdevsim2 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   48.680912][ T5004] veth1_macvtap: entered promiscuous mode
[   48.687990][   T53] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   48.690699][ T5015] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   48.696200][   T53] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   48.706890][ T5015] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.724171][ T5015] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   48.734735][ T5015] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.744767][ T5015] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   48.755952][ T5015] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.766274][ T5015] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   48.777292][ T5015] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.787244][ T5015] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   48.798516][ T5015] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.808689][ T5015] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   48.819515][ T5075] usb 8-1: new high-speed USB device number 2 using dummy_hcd
[   48.819781][ T5015] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.837794][ T5015] batman_adv: batadv0: Interface activated: batadv_slave_0
[   48.854034][ T5028] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   48.861772][ T5028] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   48.869839][ T5028] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   48.878934][ T5028] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   48.888631][   T53] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   48.896602][   T43] usb 2-1: Using ep0 maxpacket: 16
[   48.897209][   T53] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   48.918149][ T5004] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   48.928999][ T5004] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.939385][ T5004] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   48.950181][ T5004] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.960240][ T5004] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   48.971021][ T5004] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   48.981149][ T5004] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   48.991675][ T5004] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   49.001575][ T5004] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   49.012221][ T5004] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   49.014020][   T43] usb 2-1: config 1 interface 0 altsetting 0 endpoint 0xB has invalid wMaxPacketSize 0
[   49.023168][ T5004] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   49.032850][   T43] usb 2-1: config 1 interface 0 altsetting 0 bulk endpoint 0xB has invalid maxpacket 0
[   49.042577][ T5004] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   49.042586][ T5004] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   49.042598][ T5004] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   49.043367][ T5004] batman_adv: batadv0: Interface activated: batadv_slave_0
[   49.052643][   T43] usb 2-1: config 1 interface 0 altsetting 0 bulk endpoint 0x8A has invalid maxpacket 21
[   49.064555][ T5015] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   49.073966][ T5075] usb 8-1: Using ep0 maxpacket: 16
[   49.083427][ T5015] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   49.125611][ T5015] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   49.136198][ T5015] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   49.146345][   T43] usb 2-1: New USB device found, idVendor=04e6, idProduct=0005, bcdDevice= 1.75
[   49.146455][ T5015] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   49.155897][   T43] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=4
[   49.165991][ T5015] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   49.166001][ T5015] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   49.166013][ T5015] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   49.166021][ T5015] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   49.174039][   T43] usb 2-1: SerialNumber: syz
[   49.184194][ T5015] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   49.214021][ T5075] usb 8-1: config 1 interface 0 altsetting 0 endpoint 0xB has invalid wMaxPacketSize 0
[   49.214892][ T5015] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   49.219125][ T5075] usb 8-1: config 1 interface 0 altsetting 0 bulk endpoint 0xB has invalid maxpacket 0
[   49.229131][ T5015] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   49.238825][ T5142] raw-gadget.0 gadget.1: fail, usb_ep_enable returned -22
[   49.250577][ T5015] batman_adv: batadv0: Interface activated: batadv_slave_1
[   49.259484][ T5075] usb 8-1: config 1 interface 0 altsetting 0 bulk endpoint 0x8A has invalid maxpacket 21
[   49.293632][   T43] ums-sddr09 2-1:1.0: USB Mass Storage device detected
[   49.293838][ T5046] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   49.308116][ T5046] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   49.316560][ T5046] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   49.325017][ T5046] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   49.333338][ T5046] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   49.342917][    T8] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   49.350866][   T53] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   49.352749][    T8] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   49.361992][   T53] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   49.368350][ T5004] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   49.373986][ T5075] usb 8-1: New USB device found, idVendor=04e6, idProduct=0005, bcdDevice= 1.75
[   49.387057][ T5004] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   49.393491][ T5075] usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=4
[   49.403433][ T5004] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   49.411387][ T5075] usb 8-1: SerialNumber: syz
[   49.422103][ T5004] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   49.436308][ T5004] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   49.446971][ T5144] raw-gadget.1 gadget.7: fail, usb_ep_enable returned -22
[   49.454036][ T5004] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   49.464428][ T5075] ums-sddr09 8-1:1.0: USB Mass Storage device detected
[   49.464840][ T5004] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   49.482082][ T5004] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   49.492088][ T5004] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   49.502618][ T5004] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   49.512449][ T5004] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   49.523024][ T5004] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   49.533195][ T5004] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   49.543992][ T5004] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   49.554633][ T5004] batman_adv: batadv0: Interface activated: batadv_slave_1
[   49.562989][ T5015] netdevsim netdevsim3 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   49.571999][ T5015] netdevsim netdevsim3 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   49.580863][ T5015] netdevsim netdevsim3 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   49.589939][ T5015] netdevsim netdevsim3 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   49.598642][ T5008] Bluetooth: hci0: command 0x0419 tx timeout
[   49.598657][ T5008] Bluetooth: hci1: command 0x0419 tx timeout
[   49.604160][ T5022] Bluetooth: hci4: command 0x0419 tx timeout
[   49.606304][ T5008] Bluetooth: hci6: command 0x0419 tx timeout
[   49.627856][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   49.635440][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   49.643013][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   49.651826][ T5083] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   49.661365][ T5004] netdevsim netdevsim5 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   49.670354][ T5004] netdevsim netdevsim5 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   49.679390][ T5004] netdevsim netdevsim5 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   49.679542][ T5008] Bluetooth: hci3: command 0x0419 tx timeout
[   49.689427][ T5020] Bluetooth: hci7: command 0x0419 tx timeout
[   49.694883][ T5008] Bluetooth: hci5: command 0x0419 tx timeout
[   49.700134][ T5020] Bluetooth: hci2: command 0x0419 tx timeout
[   49.706312][ T5004] netdevsim netdevsim5 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   49.739237][    T8] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   49.747660][   T53] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   49.761200][   T53] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   49.766564][    T8] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   49.787195][ T5086] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   49.795324][ T5086] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   49.815749][    T8] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   49.823749][    T8] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   49.837291][    T8] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   49.845780][    T8] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   49.853335][   T24] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   49.877789][   T24] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   49.903885][ T1138] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   49.911621][   T53] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   49.912560][ T1138] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   49.929178][   T53] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   49.937374][ T5086] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   49.945773][ T5086] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   49.957490][   T53] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   49.968344][   T53] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   49.976335][   T24] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   49.996228][ T4781] usb 7-1: new high-speed USB device number 2 using dummy_hcd
[   50.034020][    T6] usb 5-1: new high-speed USB device number 2 using dummy_hcd
[   50.134132][   T24] usb 1-1: new high-speed USB device number 2 using dummy_hcd
[   50.154922][   T43] scsi host1: usb-storage 2-1:1.0
[   50.164217][   T43] usb 2-1: USB disconnect, device number 2
[   50.173975][ T5076] usb 3-1: new high-speed USB device number 2 using dummy_hcd
[   50.244121][ T5086] usb 4-1: new high-speed USB device number 2 using dummy_hcd
[   50.251707][ T4781] usb 7-1: Using ep0 maxpacket: 16
[   50.254084][ T5153] usb 6-1: new high-speed USB device number 2 using dummy_hcd
[   50.284070][    T6] usb 5-1: Using ep0 maxpacket: 16
[   50.354211][ T5075] scsi host2: usb-storage 8-1:1.0
[   50.360827][ T5075] scsi host2: scsi_proc_host_add: Failed to register host (scsi_proc_hostdir_add() failed)
[   50.373587][ T5075] usb 8-1: USB disconnect, device number 2
[   50.384327][   T24] usb 1-1: Using ep0 maxpacket: 16
[   50.404042][    T6] usb 5-1: config 1 interface 0 altsetting 0 endpoint 0xB has invalid wMaxPacketSize 0
[   50.404812][ T4781] usb 7-1: config 1 interface 0 altsetting 0 endpoint 0xB has invalid wMaxPacketSize 0
[   50.413723][    T6] usb 5-1: config 1 interface 0 altsetting 0 bulk endpoint 0xB has invalid maxpacket 0
[   50.413754][    T6] usb 5-1: config 1 interface 0 altsetting 0 bulk endpoint 0x8A has invalid maxpacket 21
[   50.423663][ T4781] usb 7-1: config 1 interface 0 altsetting 0 bulk endpoint 0xB has invalid maxpacket 0
[   50.452892][ T5076] usb 3-1: Using ep0 maxpacket: 16
[   50.458213][ T4781] usb 7-1: config 1 interface 0 altsetting 0 bulk endpoint 0x8A has invalid maxpacket 21
[   50.503999][ T5153] usb 6-1: Using ep0 maxpacket: 16
[   50.504003][ T5086] usb 4-1: Using ep0 maxpacket: 16
[   50.504264][    T6] usb 5-1: New USB device found, idVendor=04e6, idProduct=0005, bcdDevice= 1.75
[   50.523777][    T6] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=4
[   50.531844][    T6] usb 5-1: SerialNumber: syz
[   50.544080][   T24] usb 1-1: config 1 interface 0 altsetting 0 endpoint 0xB has invalid wMaxPacketSize 0
[   50.554123][ T5152] raw-gadget.3 gadget.4: fail, usb_ep_enable returned -22
[   50.561460][ T4781] usb 7-1: New USB device found, idVendor=04e6, idProduct=0005, bcdDevice= 1.75
[   50.570873][   T24] usb 1-1: config 1 interface 0 altsetting 0 bulk endpoint 0xB has invalid maxpacket 0
[   50.575830][    T6] ums-sddr09 5-1:1.0: USB Mass Storage device detected
[   50.580663][ T4781] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=4
2024/04/16 16:48:46 executed programs: 8
[   50.595831][ T5076] usb 3-1: config 1 interface 0 altsetting 0 endpoint 0xB has invalid wMaxPacketSize 0
[   50.605620][   T24] usb 1-1: config 1 interface 0 altsetting 0 bulk endpoint 0x8A has invalid maxpacket 21
[   50.615672][ T5076] usb 3-1: config 1 interface 0 altsetting 0 bulk endpoint 0xB has invalid maxpacket 0
[   50.624013][ T5153] usb 6-1: config 1 interface 0 altsetting 0 endpoint 0xB has invalid wMaxPacketSize 0
[   50.626246][ T4781] usb 7-1: SerialNumber: syz
[   50.635257][ T5153] usb 6-1: config 1 interface 0 altsetting 0 bulk endpoint 0xB has invalid maxpacket 0
[   50.647418][ T5076] usb 3-1: config 1 interface 0 altsetting 0 bulk endpoint 0x8A has invalid maxpacket 21
[   50.656277][ T5153] usb 6-1: config 1 interface 0 altsetting 0 bulk endpoint 0x8A has invalid maxpacket 21
[   50.660022][ T5086] usb 4-1: config 1 interface 0 altsetting 0 endpoint 0xB has invalid wMaxPacketSize 0
[   50.679696][ T5086] usb 4-1: config 1 interface 0 altsetting 0 bulk endpoint 0xB has invalid maxpacket 0
[   50.692086][ T5086] usb 4-1: config 1 interface 0 altsetting 0 bulk endpoint 0x8A has invalid maxpacket 21
[   50.704654][ T5150] raw-gadget.2 gadget.6: fail, usb_ep_enable returned -22
[   50.714183][   T24] usb 1-1: New USB device found, idVendor=04e6, idProduct=0005, bcdDevice= 1.75
[   50.723438][   T24] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=4
[   50.732519][ T4781] ums-sddr09 7-1:1.0: USB Mass Storage device detected
[   50.739731][   T24] usb 1-1: SerialNumber: syz
[   50.744616][ T5153] usb 6-1: New USB device found, idVendor=04e6, idProduct=0005, bcdDevice= 1.75
[   50.753757][ T5153] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=4
[   50.761978][ T5153] usb 6-1: SerialNumber: syz
[   50.774040][ T5076] usb 3-1: New USB device found, idVendor=04e6, idProduct=0005, bcdDevice= 1.75
[   50.775056][ T5157] raw-gadget.4 gadget.0: fail, usb_ep_enable returned -22
[   50.783241][ T5086] usb 4-1: New USB device found, idVendor=04e6, idProduct=0005, bcdDevice= 1.75
[   50.791368][ T5164] raw-gadget.7 gadget.5: fail, usb_ep_enable returned -22
[   50.800731][ T5076] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=4
[   50.815335][   T24] ums-sddr09 1-1:1.0: USB Mass Storage device detected
[   50.822342][ T5086] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=4
[   50.824427][ T5153] ums-sddr09 6-1:1.0: USB Mass Storage device detected
[   50.830804][ T5076] usb 3-1: SerialNumber: syz
[   50.842790][ T5086] usb 4-1: SerialNumber: syz
[   50.874836][ T5162] raw-gadget.6 gadget.3: fail, usb_ep_enable returned -22
[   50.876690][ T5159] raw-gadget.5 gadget.2: fail, usb_ep_enable returned -22
[   50.894393][ T5086] ums-sddr09 4-1:1.0: USB Mass Storage device detected
[   50.901819][ T5076] ums-sddr09 3-1:1.0: USB Mass Storage device detected
[   51.004047][ T5083] usb 2-1: new high-speed USB device number 3 using dummy_hcd
[   51.123974][ T5096] usb 8-1: new high-speed USB device number 3 using dummy_hcd
[   51.253977][ T5083] usb 2-1: Using ep0 maxpacket: 16
[   51.363997][ T5096] usb 8-1: Using ep0 maxpacket: 16
[   51.384371][ T5083] usb 2-1: config 1 interface 0 altsetting 0 endpoint 0xB has invalid wMaxPacketSize 0
[   51.394598][ T5083] usb 2-1: config 1 interface 0 altsetting 0 bulk endpoint 0xB has invalid maxpacket 0
[   51.404349][ T5083] usb 2-1: config 1 interface 0 altsetting 0 bulk endpoint 0x8A has invalid maxpacket 21
[   51.444151][    T6] scsi host1: usb-storage 5-1:1.0
[   51.453200][    T6] usb 5-1: USB disconnect, device number 2
[   51.494336][ T5096] usb 8-1: config 1 interface 0 altsetting 0 endpoint 0xB has invalid wMaxPacketSize 0
[   51.504187][ T5096] usb 8-1: config 1 interface 0 altsetting 0 bulk endpoint 0xB has invalid maxpacket 0
[   51.514208][ T5096] usb 8-1: config 1 interface 0 altsetting 0 bulk endpoint 0x8A has invalid maxpacket 21
[   51.515897][ T5083] usb 2-1: New USB device found, idVendor=04e6, idProduct=0005, bcdDevice= 1.75
[   51.535028][ T5083] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=4
[   51.543044][ T5083] usb 2-1: SerialNumber: syz
[   51.564166][ T5170] raw-gadget.0 gadget.1: fail, usb_ep_enable returned -22
[   51.574320][ T4781] scsi host2: usb-storage 7-1:1.0
[   51.583172][ T4781] usb 7-1: USB disconnect, device number 2
[   51.589377][ T5083] ums-sddr09 2-1:1.0: USB Mass Storage device detected
[   51.603981][ T5096] usb 8-1: New USB device found, idVendor=04e6, idProduct=0005, bcdDevice= 1.75
[   51.613315][ T5096] usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=4
[   51.621612][ T5096] usb 8-1: SerialNumber: syz
[   51.644141][ T5179] raw-gadget.1 gadget.7: fail, usb_ep_enable returned -22
[   51.664435][ T5096] ums-sddr09 8-1:1.0: USB Mass Storage device detected
[   51.694405][   T24] scsi host3: usb-storage 1-1:1.0
[   51.703453][   T24] usb 1-1: USB disconnect, device number 2
[   51.714793][ T5153] scsi host4: usb-storage 6-1:1.0
[   51.720854][ T5153] usb 6-1: USB disconnect, device number 2
[   51.744231][ T5076] scsi host5: usb-storage 3-1:1.0
[   51.749838][ T5076] scsi host5: scsi_proc_host_add: Failed to register host (scsi_proc_hostdir_add() failed)
[   51.766598][ T5086] scsi host6: usb-storage 4-1:1.0
[   51.772103][ T5086] scsi host6: scsi_proc_host_add: Failed to register host (scsi_proc_hostdir_add() failed)
[   51.782707][ T5076] usb 3-1: USB disconnect, device number 2
[   51.789867][ T5086] usb 4-1: USB disconnect, device number 2
[   52.194024][ T5075] usb 5-1: new high-speed USB device number 3 using dummy_hcd
[   52.343956][ T5076] usb 7-1: new high-speed USB device number 3 using dummy_hcd
[   52.433997][ T5075] usb 5-1: Using ep0 maxpacket: 16
[   52.444861][ T5083] scsi host1: usb-storage 2-1:1.0
[   52.450668][ T5083] scsi host1: scsi_proc_host_add: Failed to register host (scsi_proc_hostdir_add() failed)
[   52.461190][ T5083] usb 2-1: USB disconnect, device number 3
[   52.544175][ T5096] scsi host2: usb-storage 8-1:1.0
[   52.549768][ T5096] scsi host2: scsi_proc_host_add: Failed to register host (scsi_proc_hostdir_add() failed)
[   52.560090][ T5075] usb 5-1: config 1 interface 0 altsetting 0 endpoint 0xB has invalid wMaxPacketSize 0
[   52.574807][ T5096] usb 8-1: USB disconnect, device number 3
[   52.581128][ T5075] usb 5-1: config 1 interface 0 altsetting 0 bulk endpoint 0xB has invalid maxpacket 0
[   52.590969][ T5075] usb 5-1: config 1 interface 0 altsetting 0 bulk endpoint 0x8A has invalid maxpacket 21
[   52.603990][ T5076] usb 7-1: Using ep0 maxpacket: 16
[   52.674049][ T5075] usb 5-1: New USB device found, idVendor=04e6, idProduct=0005, bcdDevice= 1.75
[   52.683123][ T5075] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=4
[   52.691535][ T5075] usb 5-1: SerialNumber: syz
[   52.714417][ T5197] raw-gadget.2 gadget.4: fail, usb_ep_enable returned -22
[   52.734050][ T5076] usb 7-1: config 1 interface 0 altsetting 0 endpoint 0xB has invalid wMaxPacketSize 0
[   52.734456][ T5075] ums-sddr09 5-1:1.0: USB Mass Storage device detected
[   52.744378][ T5076] usb 7-1: config 1 interface 0 altsetting 0 bulk endpoint 0xB has invalid maxpacket 0
[   52.761010][ T5076] usb 7-1: config 1 interface 0 altsetting 0 bulk endpoint 0x8A has invalid maxpacket 21
[   52.844060][ T5076] usb 7-1: New USB device found, idVendor=04e6, idProduct=0005, bcdDevice= 1.75
[   52.853146][ T5076] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=4
[   52.861139][ T5076] usb 7-1: SerialNumber: syz
[   52.894122][ T5199] raw-gadget.3 gadget.6: fail, usb_ep_enable returned -22
[   52.914406][ T5076] ums-sddr09 7-1:1.0: USB Mass Storage device detected
[   53.624152][ T5075] scsi host1: usb-storage 5-1:1.0
[   53.630535][ T5075] usb 5-1: USB disconnect, device number 3
[   53.794781][ T5076] scsi host2: usb-storage 7-1:1.0
[   53.800474][ T5076] scsi host2: scsi_proc_host_add: Failed to register host (scsi_proc_hostdir_add() failed)
[   53.815486][ T5076] usb 7-1: USB disconnect, device number 3
2024/04/16 16:48:56 executed programs: 19
[   60.663964][ T5079] usb 4-1: new high-speed USB device number 3 using dummy_hcd
[   60.671601][ T1757] usb 3-1: new high-speed USB device number 3 using dummy_hcd
[   60.679200][ T5096] usb 7-1: new high-speed USB device number 4 using dummy_hcd
[   60.686793][ T5075] usb 1-1: new high-speed USB device number 3 using dummy_hcd
[   60.693949][ T5083] usb 5-1: new high-speed USB device number 4 using dummy_hcd
[   60.694444][ T5028] usb 6-1: new high-speed USB device number 3 using dummy_hcd
[   60.709462][ T5080] usb 8-1: new high-speed USB device number 4 using dummy_hcd
[   60.717024][ T5153] usb 2-1: new high-speed USB device number 4 using dummy_hcd
[   60.943984][ T5083] usb 5-1: Using ep0 maxpacket: 16
[   60.963986][ T1757] usb 3-1: Using ep0 maxpacket: 16
[   60.969152][ T5096] usb 7-1: Using ep0 maxpacket: 16
[   60.974462][ T5080] usb 8-1: Using ep0 maxpacket: 16
[   60.979591][ T5075] usb 1-1: Using ep0 maxpacket: 16
[   60.984709][ T5153] usb 2-1: Using ep0 maxpacket: 16
[   60.989848][ T5079] usb 4-1: Using ep0 maxpacket: 16
[   60.995320][ T5028] usb 6-1: Using ep0 maxpacket: 16
[   61.074493][ T5083] usb 5-1: config 1 interface 0 altsetting 0 endpoint 0xB has invalid wMaxPacketSize 0
[   61.084183][ T5083] usb 5-1: config 1 interface 0 altsetting 0 bulk endpoint 0xB has invalid maxpacket 0
[   61.093838][ T5083] usb 5-1: config 1 interface 0 altsetting 0 bulk endpoint 0x8A has invalid maxpacket 21
[   61.094079][ T5080] usb 8-1: config 1 interface 0 altsetting 0 endpoint 0xB has invalid wMaxPacketSize 0
[   61.113603][ T1757] usb 3-1: config 1 interface 0 altsetting 0 endpoint 0xB has invalid wMaxPacketSize 0
[   61.123520][ T5153] usb 2-1: config 1 interface 0 altsetting 0 endpoint 0xB has invalid wMaxPacketSize 0
[   61.133636][ T5075] usb 1-1: config 1 interface 0 altsetting 0 endpoint 0xB has invalid wMaxPacketSize 0
[   61.144029][ T5079] usb 4-1: config 1 interface 0 altsetting 0 endpoint 0xB has invalid wMaxPacketSize 0
[   61.153677][ T5079] usb 4-1: config 1 interface 0 altsetting 0 bulk endpoint 0xB has invalid maxpacket 0
[   61.163521][ T5096] usb 7-1: config 1 interface 0 altsetting 0 endpoint 0xB has invalid wMaxPacketSize 0
[   61.173220][ T5028] usb 6-1: config 1 interface 0 altsetting 0 endpoint 0xB has invalid wMaxPacketSize 0
[   61.182875][ T5096] usb 7-1: config 1 interface 0 altsetting 0 bulk endpoint 0xB has invalid maxpacket 0
[   61.192594][ T1757] usb 3-1: config 1 interface 0 altsetting 0 bulk endpoint 0xB has invalid maxpacket 0
[   61.194482][ T5083] usb 5-1: New USB device found, idVendor=04e6, idProduct=0005, bcdDevice= 1.75
[   61.202250][ T5153] usb 2-1: config 1 interface 0 altsetting 0 bulk endpoint 0xB has invalid maxpacket 0
[   61.212066][ T5083] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=4
[   61.220963][ T5075] usb 1-1: config 1 interface 0 altsetting 0 bulk endpoint 0xB has invalid maxpacket 0
[   61.229164][ T5083] usb 5-1: SerialNumber: syz
[   61.238699][ T5028] usb 6-1: config 1 interface 0 altsetting 0 bulk endpoint 0xB has invalid maxpacket 0
[   61.238728][ T5028] usb 6-1: config 1 interface 0 altsetting 0 bulk endpoint 0x8A has invalid maxpacket 21
[   61.238790][ T5080] usb 8-1: config 1 interface 0 altsetting 0 bulk endpoint 0xB has invalid maxpacket 0
[   61.238817][ T5080] usb 8-1: config 1 interface 0 altsetting 0 bulk endpoint 0x8A has invalid maxpacket 21
[   61.264467][ T5216] raw-gadget.1 gadget.4: fail, usb_ep_enable returned -22
[   61.272702][ T5079] usb 4-1: config 1 interface 0 altsetting 0 bulk endpoint 0x8A has invalid maxpacket 21
[   61.299818][ T1757] usb 3-1: config 1 interface 0 altsetting 0 bulk endpoint 0x8A has invalid maxpacket 21
[   61.304792][ T5083] ums-sddr09 5-1:1.0: USB Mass Storage device detected
[   61.309640][ T5096] usb 7-1: config 1 interface 0 altsetting 0 bulk endpoint 0x8A has invalid maxpacket 21
[   61.326489][ T5075] usb 1-1: config 1 interface 0 altsetting 0 bulk endpoint 0x8A has invalid maxpacket 21
[   61.336458][ T5028] usb 6-1: New USB device found, idVendor=04e6, idProduct=0005, bcdDevice= 1.75
[   61.345727][ T5153] usb 2-1: config 1 interface 0 altsetting 0 bulk endpoint 0x8A has invalid maxpacket 21
[   61.355622][ T5028] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=4
[   61.363598][ T5028] usb 6-1: SerialNumber: syz
[   61.384188][ T5220] raw-gadget.4 gadget.5: fail, usb_ep_enable returned -22
[   61.404581][ T5028] ums-sddr09 6-1:1.0: USB Mass Storage device detected
[   61.434535][ T1757] usb 3-1: New USB device found, idVendor=04e6, idProduct=0005, bcdDevice= 1.75
[   61.443607][ T1757] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=4
[   61.451911][ T5096] usb 7-1: New USB device found, idVendor=04e6, idProduct=0005, bcdDevice= 1.75
[   61.463425][ T5075] usb 1-1: New USB device found, idVendor=04e6, idProduct=0005, bcdDevice= 1.75
[   61.472606][ T5153] usb 2-1: New USB device found, idVendor=04e6, idProduct=0005, bcdDevice= 1.75
[   61.481659][ T5079] usb 4-1: New USB device found, idVendor=04e6, idProduct=0005, bcdDevice= 1.75
[   61.490791][ T5080] usb 8-1: New USB device found, idVendor=04e6, idProduct=0005, bcdDevice= 1.75
[   61.500120][ T5153] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=4
[   61.508242][ T5079] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=4
[   61.516260][ T5075] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=4
[   61.524401][ T5080] usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=4
[   61.532383][ T5080] usb 8-1: SerialNumber: syz
[   61.537144][ T5096] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=4
[   61.545589][ T5079] usb 4-1: SerialNumber: syz
[   61.550374][ T5075] usb 1-1: SerialNumber: syz
[   61.555005][ T5153] usb 2-1: SerialNumber: syz
[   61.559783][ T1757] usb 3-1: SerialNumber: syz
[   61.564407][ T5096] usb 7-1: SerialNumber: syz
[   61.584128][ T5227] raw-gadget.7 gadget.7: fail, usb_ep_enable returned -22
[   61.584165][ T5223] raw-gadget.5 gadget.2: fail, usb_ep_enable returned -22
[   61.591573][ T5219] raw-gadget.2 gadget.3: fail, usb_ep_enable returned -22
[   61.601412][ T5226] raw-gadget.6 gadget.1: fail, usb_ep_enable returned -22
[   61.606976][ T5215] raw-gadget.0 gadget.6: fail, usb_ep_enable returned -22
[   61.613197][ T5080] ums-sddr09 8-1:1.0: USB Mass Storage device detected
[   61.621437][ T5222] raw-gadget.3 gadget.0: fail, usb_ep_enable returned -22
[   61.627232][ T5079] ums-sddr09 4-1:1.0: USB Mass Storage device detected
[   61.641096][ T5096] ums-sddr09 7-1:1.0: USB Mass Storage device detected
[   61.649083][ T5153] ums-sddr09 2-1:1.0: USB Mass Storage device detected
[   61.656288][ T5075] ums-sddr09 1-1:1.0: USB Mass Storage device detected
[   61.663726][ T1757] ums-sddr09 3-1:1.0: USB Mass Storage device detected
[   62.174228][ T5083] scsi host1: usb-storage 5-1:1.0
[   62.184375][ T5083] usb 5-1: USB disconnect, device number 4
[   62.284332][ T5028] scsi host2: usb-storage 6-1:1.0
[   62.291483][ T5028] usb 6-1: USB disconnect, device number 3
[   62.484492][ T5080] scsi host4: usb-storage 8-1:1.0
[   62.491241][ T5080] usb 8-1: USB disconnect, device number 4
[   62.504632][ T5079] scsi host5: usb-storage 4-1:1.0
[   62.510174][ T5096] scsi host8: usb-storage 7-1:1.0
[   62.522420][ T5096] usb 7-1: USB disconnect, device number 4
[   62.528889][ T5079] usb 4-1: USB disconnect, device number 3
[   62.534748][ T1757] scsi host6: usb-storage 3-1:1.0
[   62.540364][ T5075] scsi host3: usb-storage 1-1:1.0
[   62.545446][ T5153] scsi host7: usb-storage 2-1:1.0
[   62.553632][ T5075] usb 1-1: USB disconnect, device number 3
[   62.560426][ T1757] usb 3-1: USB disconnect, device number 3
[   62.566430][ T5153] usb 2-1: USB disconnect, device number 4
[   62.573784][ T5075] ------------[ cut here ]------------
[   62.579292][ T5075] remove_proc_entry: removing non-empty directory 'scsi/ums-sddr09', leaking at least '5'
[   62.589807][ T5075] WARNING: CPU: 0 PID: 5075 at fs/proc/generic.c:718 remove_proc_entry+0x275/0x2b0
[   62.599231][ T5075] Modules linked in:
[   62.603246][ T5075] CPU: 0 PID: 5075 Comm: kworker/0:4 Not tainted 6.3.0-rc1-syzkaller-00028-g4b1a2c2a8e0d #0
[   62.613504][ T5075] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
[   62.623604][ T5075] Workqueue: usb_hub_wq hub_event
[   62.628643][ T5075] RIP: 0010:remove_proc_entry+0x275/0x2b0
[   62.634409][ T5075] Code: ff 48 8b 45 f0 48 c7 c6 40 55 c7 84 48 c7 c7 10 a8 83 85 48 8b 4d 18 4c 8b 83 a0 00 00 00 48 8b 90 a0 00 00 00 e8 0b 2a b3 ff <0f> 0b e9 47 ff ff ff e8 ef b9 c7 ff 48 8b 75 18 48 c7 c7 e8 a7 83
[   62.654179][ T5075] RSP: 0018:ffffc90002a07ac0 EFLAGS: 00010282
[   62.660682][ T5075] RAX: 0000000000000000 RBX: ffff888117c66cc0 RCX: 0000000000000000
[   62.668690][ T5075] RDX: ffff8881153c81c0 RSI: ffffffff8127d643 RDI: 0000000000000001
[   62.677047][ T5075] RBP: ffff888117dfb688 R08: 0000000000000001 R09: 0000000000000000
[   62.685104][ T5075] R10: 0000000000000001 R11: 705f65766f6d6572 R12: ffff888117dfb600
[   62.693347][ T5075] R13: ffff888117dfb680 R14: ffffffff857a921e R15: ffff88814016c600
[   62.701705][ T5075] FS:  0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
[   62.711063][ T5075] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   62.717757][ T5075] CR2: 00007efebe4a7b39 CR3: 00000001187af000 CR4: 00000000003506f0
[   62.725971][ T5075] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   62.734185][ T5075] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   62.742169][ T5075] Call Trace:
[   62.745563][ T5075]  <TASK>
[   62.748518][ T5075]  scsi_proc_hostdir_rm+0xb8/0x120
[   62.753711][ T5075]  scsi_remove_host+0xc0/0x200
[   62.758487][ T5075]  usb_stor_disconnect+0x72/0xf0
[   62.763491][ T5075]  usb_unbind_interface+0xe3/0x3f0
[   62.768633][ T5075]  ? usb_unbind_device+0xd0/0xd0
[   62.773623][ T5075]  device_remove+0x6d/0x80
[   62.778087][ T5075]  device_release_driver_internal+0x25d/0x2f0
[   62.784293][ T5075]  bus_remove_device+0xf6/0x140
[   62.789434][ T5075]  device_del+0x1e1/0x4b0
[   62.793957][ T5075]  usb_disable_device+0x145/0x240
[   62.799260][ T5075]  usb_disconnect+0x149/0x390
[   62.803969][ T5075]  hub_event+0x119d/0x24c0
[   62.808401][ T5075]  ? _raw_spin_unlock_irqrestore+0x27/0x40
[   62.814257][ T5075]  ? __pm_runtime_suspend+0x77/0x170
[   62.819649][ T5075]  process_one_work+0x2e5/0x650
[   62.824687][ T5075]  worker_thread+0x330/0x5c0
[   62.829408][ T5075]  ? _raw_spin_lock_irqsave+0x16/0x50
[   62.834813][ T5075]  ? rescuer_thread+0x580/0x580
[   62.839783][ T5075]  kthread+0x123/0x160
[   62.843965][ T5075]  ? kthread_complete_and_exit+0x30/0x30
[   62.849639][ T5075]  ret_from_fork+0x1f/0x30
[   62.854171][ T5075]  </TASK>
[   62.857184][ T5075] ---[ end trace 0000000000000000 ]---
[   62.933989][ T5083] usb 5-1: new high-speed USB device number 5 using dummy_hcd
[   63.183956][ T5083] usb 5-1: Using ep0 maxpacket: 16
[   63.314372][ T5083] usb 5-1: config 1 interface 0 altsetting 0 endpoint 0xB has invalid wMaxPacketSize 0
[   63.324496][ T5083] usb 5-1: config 1 interface 0 altsetting 0 bulk endpoint 0xB has invalid maxpacket 0
[   63.334474][ T5083] usb 5-1: config 1 interface 0 altsetting 0 bulk endpoint 0x8A has invalid maxpacket 21
[   63.434262][ T5083] usb 5-1: New USB device found, idVendor=04e6, idProduct=0005, bcdDevice= 1.75
[   63.443433][ T5083] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=4
[   63.451561][ T5083] usb 5-1: SerialNumber: syz
[   63.474170][ T5265] raw-gadget.0 gadget.4: fail, usb_ep_enable returned -22
[   63.494428][ T5083] ums-sddr09 5-1:1.0: USB Mass Storage device detected
[   64.364748][ T5083] scsi host1: usb-storage 5-1:1.0
[   64.370848][ T5083] usb 5-1: USB disconnect, device number 5
[   69.914321][ T2486] cfg80211: failed to load regulatory.db
[   69.914601][ T1209] ieee802154 phy0 wpan0: encryption failed: -22
[   69.926551][ T1209] ieee802154 phy1 wpan1: encryption failed: -22
[   70.865409][ T5269] kmemleak: 3 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
