Warning: Permanently added '10.128.0.75' (ED25519) to the list of known hosts.
2024/04/16 16:19:17 ignoring optional flag "sandboxArg"="0"
2024/04/16 16:19:17 parsed 1 programs
2024/04/16 16:19:25 executed programs: 0
[   46.447950][ T5403] Adding 124996k swap on ./swap-file.  Priority:0 extents:1 across:124996k FS
[   46.739224][ T5424] chnl_net:caif_netlink_parms(): no params data found
[   46.785682][ T5438] chnl_net:caif_netlink_parms(): no params data found
[   46.798848][ T5435] chnl_net:caif_netlink_parms(): no params data found
[   46.810903][ T5424] bridge0: port 1(bridge_slave_0) entered blocking state
[   46.817992][ T5424] bridge0: port 1(bridge_slave_0) entered disabled state
[   46.825715][ T5424] device bridge_slave_0 entered promiscuous mode
[   46.833509][ T5424] bridge0: port 2(bridge_slave_1) entered blocking state
[   46.841013][ T5424] bridge0: port 2(bridge_slave_1) entered disabled state
[   46.848395][ T5424] device bridge_slave_1 entered promiscuous mode
[   46.858870][ T5424] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   46.876456][ T5428] chnl_net:caif_netlink_parms(): no params data found
[   46.890322][ T5424] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   46.905225][ T5424] team0: Port device team_slave_0 added
[   46.915851][ T5425] chnl_net:caif_netlink_parms(): no params data found
[   46.930107][ T5426] chnl_net:caif_netlink_parms(): no params data found
[   46.940706][ T5424] team0: Port device team_slave_1 added
[   46.946586][ T5438] bridge0: port 1(bridge_slave_0) entered blocking state
[   46.953783][ T5438] bridge0: port 1(bridge_slave_0) entered disabled state
[   46.961368][ T5438] device bridge_slave_0 entered promiscuous mode
[   46.969054][ T5438] bridge0: port 2(bridge_slave_1) entered blocking state
[   46.976436][ T5438] bridge0: port 2(bridge_slave_1) entered disabled state
[   46.984204][ T5438] device bridge_slave_1 entered promiscuous mode
[   46.995718][ T5428] bridge0: port 1(bridge_slave_0) entered blocking state
[   47.002883][ T5428] bridge0: port 1(bridge_slave_0) entered disabled state
[   47.010251][ T5428] device bridge_slave_0 entered promiscuous mode
[   47.025585][ T5424] batman_adv: batadv0: Adding interface: batadv_slave_0
[   47.032631][ T5424] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   47.058981][ T5424] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   47.077243][ T5438] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   47.086738][ T5428] bridge0: port 2(bridge_slave_1) entered blocking state
[   47.093854][ T5428] bridge0: port 2(bridge_slave_1) entered disabled state
[   47.101627][ T5428] device bridge_slave_1 entered promiscuous mode
[   47.114701][ T5435] bridge0: port 1(bridge_slave_0) entered blocking state
[   47.122100][ T5435] bridge0: port 1(bridge_slave_0) entered disabled state
[   47.129652][ T5435] device bridge_slave_0 entered promiscuous mode
[   47.136510][ T5424] batman_adv: batadv0: Adding interface: batadv_slave_1
[   47.148781][ T5424] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   47.175010][ T5424] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   47.190088][ T5438] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   47.204416][ T5428] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   47.214923][ T5428] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   47.224462][ T5435] bridge0: port 2(bridge_slave_1) entered blocking state
[   47.231618][ T5435] bridge0: port 2(bridge_slave_1) entered disabled state
[   47.239178][ T5435] device bridge_slave_1 entered promiscuous mode
[   47.253791][ T5425] bridge0: port 1(bridge_slave_0) entered blocking state
[   47.261126][ T5425] bridge0: port 1(bridge_slave_0) entered disabled state
[   47.268587][ T5425] device bridge_slave_0 entered promiscuous mode
[   47.276806][ T5425] bridge0: port 2(bridge_slave_1) entered blocking state
[   47.284278][ T5425] bridge0: port 2(bridge_slave_1) entered disabled state
[   47.291802][ T5425] device bridge_slave_1 entered promiscuous mode
[   47.298449][ T5430] chnl_net:caif_netlink_parms(): no params data found
[   47.312985][ T5424] device hsr_slave_0 entered promiscuous mode
[   47.319326][ T5424] device hsr_slave_1 entered promiscuous mode
[   47.331489][ T5438] team0: Port device team_slave_0 added
[   47.338104][ T5434] chnl_net:caif_netlink_parms(): no params data found
[   47.351146][ T5425] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   47.364155][ T5428] team0: Port device team_slave_0 added
[   47.372662][ T5435] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   47.382794][ T5438] team0: Port device team_slave_1 added
[   47.394309][ T5426] bridge0: port 1(bridge_slave_0) entered blocking state
[   47.401961][ T5426] bridge0: port 1(bridge_slave_0) entered disabled state
[   47.409406][ T5426] device bridge_slave_0 entered promiscuous mode
[   47.417831][ T5426] bridge0: port 2(bridge_slave_1) entered blocking state
[   47.425605][ T5426] bridge0: port 2(bridge_slave_1) entered disabled state
[   47.433053][ T5426] device bridge_slave_1 entered promiscuous mode
[   47.442752][ T5425] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   47.452307][ T5428] team0: Port device team_slave_1 added
[   47.461007][ T5435] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   47.470428][ T5438] batman_adv: batadv0: Adding interface: batadv_slave_0
[   47.477443][ T5438] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   47.504086][ T5438] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   47.520377][ T5426] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   47.531577][ T5426] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   47.548171][ T5428] batman_adv: batadv0: Adding interface: batadv_slave_0
[   47.555390][ T5428] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   47.582017][ T5428] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   47.595681][ T5438] batman_adv: batadv0: Adding interface: batadv_slave_1
[   47.602687][ T5438] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   47.628997][ T5438] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   47.643073][ T5434] bridge0: port 1(bridge_slave_0) entered blocking state
[   47.650191][ T5434] bridge0: port 1(bridge_slave_0) entered disabled state
[   47.657593][ T5434] device bridge_slave_0 entered promiscuous mode
[   47.671189][ T5425] team0: Port device team_slave_0 added
[   47.678114][ T5425] team0: Port device team_slave_1 added
[   47.684004][ T5428] batman_adv: batadv0: Adding interface: batadv_slave_1
[   47.690993][ T5428] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   47.717085][ T5428] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   47.728298][ T5435] team0: Port device team_slave_0 added
[   47.739424][ T5438] device hsr_slave_0 entered promiscuous mode
[   47.746389][ T5438] device hsr_slave_1 entered promiscuous mode
[   47.753411][ T5438] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   47.761234][ T5438] Cannot create hsr debugfs directory
[   47.766711][ T5434] bridge0: port 2(bridge_slave_1) entered blocking state
[   47.773811][ T5434] bridge0: port 2(bridge_slave_1) entered disabled state
[   47.781244][ T5434] device bridge_slave_1 entered promiscuous mode
[   47.788530][ T5430] bridge0: port 1(bridge_slave_0) entered blocking state
[   47.795907][ T5430] bridge0: port 1(bridge_slave_0) entered disabled state
[   47.803365][ T5430] device bridge_slave_0 entered promiscuous mode
[   47.811875][ T5430] bridge0: port 2(bridge_slave_1) entered blocking state
[   47.819232][ T5430] bridge0: port 2(bridge_slave_1) entered disabled state
[   47.826566][ T5430] device bridge_slave_1 entered promiscuous mode
[   47.837848][ T5425] batman_adv: batadv0: Adding interface: batadv_slave_0
[   47.844958][ T5425] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   47.871155][ T5425] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   47.883127][ T5425] batman_adv: batadv0: Adding interface: batadv_slave_1
[   47.890293][ T5425] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   47.917898][ T5425] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   47.929464][ T5435] team0: Port device team_slave_1 added
[   47.942389][ T5426] team0: Port device team_slave_0 added
[   47.952363][ T5430] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   47.962870][ T5430] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   47.979235][ T5428] device hsr_slave_0 entered promiscuous mode
[   47.985626][ T5428] device hsr_slave_1 entered promiscuous mode
[   47.992115][ T5428] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   48.000915][ T5428] Cannot create hsr debugfs directory
[   48.007870][ T5435] batman_adv: batadv0: Adding interface: batadv_slave_0
[   48.014996][ T5435] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   48.042578][ T5435] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   48.058219][ T5426] team0: Port device team_slave_1 added
[   48.068451][ T5430] team0: Port device team_slave_0 added
[   48.076562][ T5425] device hsr_slave_0 entered promiscuous mode
[   48.083067][ T5425] device hsr_slave_1 entered promiscuous mode
[   48.089347][ T5425] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   48.096903][ T5425] Cannot create hsr debugfs directory
[   48.108929][ T5435] batman_adv: batadv0: Adding interface: batadv_slave_1
[   48.116048][ T5435] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   48.142434][ T5435] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   48.159148][ T5434] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   48.170021][ T5434] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   48.181815][ T5426] batman_adv: batadv0: Adding interface: batadv_slave_0
[   48.188896][ T5426] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   48.216304][ T5426] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   48.227385][ T5430] team0: Port device team_slave_1 added
[   48.238782][ T5430] batman_adv: batadv0: Adding interface: batadv_slave_0
[   48.246043][ T5430] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   48.273590][ T5430] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   48.292740][ T5434] team0: Port device team_slave_0 added
[   48.298736][ T5426] batman_adv: batadv0: Adding interface: batadv_slave_1
[   48.305744][ T5426] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   48.332887][ T5426] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   48.349120][ T5430] batman_adv: batadv0: Adding interface: batadv_slave_1
[   48.356977][ T5430] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   48.383890][ T5430] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   48.399415][ T5434] team0: Port device team_slave_1 added
[   48.414939][ T5430] device hsr_slave_0 entered promiscuous mode
[   48.421577][ T5430] device hsr_slave_1 entered promiscuous mode
[   48.427849][ T5430] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   48.435614][ T5430] Cannot create hsr debugfs directory
[   48.452186][ T5426] device hsr_slave_0 entered promiscuous mode
[   48.458637][ T5426] device hsr_slave_1 entered promiscuous mode
[   48.465301][ T5426] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   48.472971][ T5426] Cannot create hsr debugfs directory
[   48.483111][ T5435] device hsr_slave_0 entered promiscuous mode
[   48.489549][ T5435] device hsr_slave_1 entered promiscuous mode
[   48.495707][ T5435] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   48.503302][ T5435] Cannot create hsr debugfs directory
[   48.509845][ T5424] netdevsim netdevsim1 netdevsim0: renamed from eth0
[   48.517616][ T5434] batman_adv: batadv0: Adding interface: batadv_slave_0
[   48.524652][ T5434] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   48.551107][ T5434] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   48.562771][ T5434] batman_adv: batadv0: Adding interface: batadv_slave_1
[   48.569866][ T5434] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   48.596237][ T5434] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   48.616794][ T5434] device hsr_slave_0 entered promiscuous mode
[   48.623149][ T5434] device hsr_slave_1 entered promiscuous mode
[   48.629611][ T5434] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   48.637316][ T5434] Cannot create hsr debugfs directory
[   48.643434][ T3264] Bluetooth: hci3: command 0x0409 tx timeout
[   48.649642][ T5496] Bluetooth: hci5: command 0x0409 tx timeout
[   48.655875][ T5424] netdevsim netdevsim1 netdevsim1: renamed from eth1
[   48.663346][ T3264] Bluetooth: hci1: command 0x0409 tx timeout
[   48.669406][ T3264] Bluetooth: hci4: command 0x0409 tx timeout
[   48.670374][ T5424] netdevsim netdevsim1 netdevsim2: renamed from eth2
[   48.675715][ T3264] Bluetooth: hci2: command 0x0409 tx timeout
[   48.688755][ T3264] Bluetooth: hci6: command 0x0409 tx timeout
[   48.698722][ T3264] Bluetooth: hci0: command 0x0409 tx timeout
[   48.712544][ T5424] netdevsim netdevsim1 netdevsim3: renamed from eth3
[   48.718777][ T5456] Bluetooth: hci7: command 0x0409 tx timeout
[   48.750217][ T5438] netdevsim netdevsim0 netdevsim0: renamed from eth0
[   48.759510][ T5438] netdevsim netdevsim0 netdevsim1: renamed from eth1
[   48.768158][ T5438] netdevsim netdevsim0 netdevsim2: renamed from eth2
[   48.778434][ T5438] netdevsim netdevsim0 netdevsim3: renamed from eth3
[   48.801371][ T5428] netdevsim netdevsim6 netdevsim0: renamed from eth0
[   48.820916][ T5428] netdevsim netdevsim6 netdevsim1: renamed from eth1
[   48.831660][ T5425] netdevsim netdevsim5 netdevsim0: renamed from eth0
[   48.840090][ T5425] netdevsim netdevsim5 netdevsim1: renamed from eth1
[   48.847885][ T5428] netdevsim netdevsim6 netdevsim2: renamed from eth2
[   48.855656][ T5428] netdevsim netdevsim6 netdevsim3: renamed from eth3
[   48.867906][ T5425] netdevsim netdevsim5 netdevsim2: renamed from eth2
[   48.881856][ T5425] netdevsim netdevsim5 netdevsim3: renamed from eth3
[   48.907992][ T5424] 8021q: adding VLAN 0 to HW filter on device bond0
[   48.916099][ T5430] netdevsim netdevsim7 netdevsim0: renamed from eth0
[   48.925350][ T5430] netdevsim netdevsim7 netdevsim1: renamed from eth1
[   48.936527][ T5430] netdevsim netdevsim7 netdevsim2: renamed from eth2
[   48.945328][ T5430] netdevsim netdevsim7 netdevsim3: renamed from eth3
[   48.972376][ T5424] 8021q: adding VLAN 0 to HW filter on device team0
[   48.984731][ T5438] 8021q: adding VLAN 0 to HW filter on device bond0
[   48.997012][ T5438] 8021q: adding VLAN 0 to HW filter on device team0
[   49.008642][ T5426] netdevsim netdevsim2 netdevsim0: renamed from eth0
[   49.039741][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   49.047749][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   49.055492][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   49.064289][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   49.072476][ T5456] bridge0: port 1(bridge_slave_0) entered blocking state
[   49.079684][ T5456] bridge0: port 1(bridge_slave_0) entered forwarding state
[   49.087058][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   49.094700][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   49.102696][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   49.111111][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   49.119573][ T5456] bridge0: port 2(bridge_slave_1) entered blocking state
[   49.126584][ T5456] bridge0: port 2(bridge_slave_1) entered forwarding state
[   49.134123][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   49.142385][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   49.150814][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   49.159160][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   49.167426][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   49.175824][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   49.189802][ T5426] netdevsim netdevsim2 netdevsim1: renamed from eth1
[   49.199660][ T5426] netdevsim netdevsim2 netdevsim2: renamed from eth2
[   49.207276][ T5426] netdevsim netdevsim2 netdevsim3: renamed from eth3
[   49.216577][ T5430] 8021q: adding VLAN 0 to HW filter on device bond0
[   49.226281][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   49.234341][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   49.242748][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   49.251222][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   49.259920][ T5502] bridge0: port 1(bridge_slave_0) entered blocking state
[   49.267030][ T5502] bridge0: port 1(bridge_slave_0) entered forwarding state
[   49.274582][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   49.283187][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   49.292207][ T5502] bridge0: port 2(bridge_slave_1) entered blocking state
[   49.299233][ T5502] bridge0: port 2(bridge_slave_1) entered forwarding state
[   49.306927][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   49.315421][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   49.323810][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   49.332252][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   49.341182][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   49.352647][ T5428] 8021q: adding VLAN 0 to HW filter on device bond0
[   49.361746][ T5424] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   49.374960][ T5430] 8021q: adding VLAN 0 to HW filter on device team0
[   49.382336][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   49.391461][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   49.399929][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   49.407835][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   49.415512][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   49.423811][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   49.433060][ T5435] netdevsim netdevsim3 netdevsim0: renamed from eth0
[   49.444168][ T5438] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   49.455457][ T5438] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   49.470288][ T5425] 8021q: adding VLAN 0 to HW filter on device bond0
[   49.483231][ T5428] 8021q: adding VLAN 0 to HW filter on device team0
[   49.490314][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   49.499588][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   49.508321][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   49.517082][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   49.525670][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   49.534121][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   49.542553][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   49.550703][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   49.559190][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   49.567502][   T36] bridge0: port 1(bridge_slave_0) entered blocking state
[   49.574668][   T36] bridge0: port 1(bridge_slave_0) entered forwarding state
[   49.582418][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   49.590055][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   49.597541][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   49.606058][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   49.614304][   T36] bridge0: port 2(bridge_slave_1) entered blocking state
[   49.621545][   T36] bridge0: port 2(bridge_slave_1) entered forwarding state
[   49.629227][ T5435] netdevsim netdevsim3 netdevsim1: renamed from eth1
[   49.644638][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   49.652530][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   49.660384][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   49.669050][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   49.677245][   T36] bridge0: port 1(bridge_slave_0) entered blocking state
[   49.684331][   T36] bridge0: port 1(bridge_slave_0) entered forwarding state
[   49.691907][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   49.699376][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   49.707303][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   49.728796][ T5435] netdevsim netdevsim3 netdevsim2: renamed from eth2
[   49.736890][ T5435] netdevsim netdevsim3 netdevsim3: renamed from eth3
[   49.756172][ T5430] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   49.767643][ T5430] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   49.780117][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   49.788452][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   49.796952][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   49.805822][ T5502] bridge0: port 2(bridge_slave_1) entered blocking state
[   49.813026][ T5502] bridge0: port 2(bridge_slave_1) entered forwarding state
[   49.820639][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   49.829184][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   49.837660][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   49.846104][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   49.854397][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   49.862929][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   49.871593][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   49.880124][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   49.888268][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   49.896432][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   49.905009][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   49.913248][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   49.921575][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   49.930544][ T5425] 8021q: adding VLAN 0 to HW filter on device team0
[   49.941978][ T5434] netdevsim netdevsim4 netdevsim0: renamed from eth0
[   49.949712][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   49.957411][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   49.965382][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   49.973466][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   49.981842][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   49.990038][ T5502] bridge0: port 1(bridge_slave_0) entered blocking state
[   49.997209][ T5502] bridge0: port 1(bridge_slave_0) entered forwarding state
[   50.004845][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   50.013291][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   50.021514][ T5502] bridge0: port 2(bridge_slave_1) entered blocking state
[   50.028756][ T5502] bridge0: port 2(bridge_slave_1) entered forwarding state
[   50.038802][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   50.046778][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   50.055257][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   50.063363][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   50.071694][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   50.081506][ T5426] 8021q: adding VLAN 0 to HW filter on device bond0
[   50.099308][ T5426] 8021q: adding VLAN 0 to HW filter on device team0
[   50.108758][ T5434] netdevsim netdevsim4 netdevsim1: renamed from eth1
[   50.116365][ T5434] netdevsim netdevsim4 netdevsim2: renamed from eth2
[   50.128488][ T5424] 8021q: adding VLAN 0 to HW filter on device batadv0
[   50.138174][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   50.145825][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   50.153389][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   50.160904][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   50.168258][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   50.176540][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   50.190605][ T5428] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   50.200527][ T5434] netdevsim netdevsim4 netdevsim3: renamed from eth3
[   50.215597][ T5425] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   50.226692][ T5425] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   50.239929][ T5438] 8021q: adding VLAN 0 to HW filter on device batadv0
[   50.249566][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   50.257944][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   50.266904][ T5499] bridge0: port 1(bridge_slave_0) entered blocking state
[   50.274123][ T5499] bridge0: port 1(bridge_slave_0) entered forwarding state
[   50.281886][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   50.290495][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   50.298745][ T5499] bridge0: port 2(bridge_slave_1) entered blocking state
[   50.305862][ T5499] bridge0: port 2(bridge_slave_1) entered forwarding state
[   50.313375][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   50.321113][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   50.328750][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   50.337078][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   50.345422][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   50.353692][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   50.361893][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   50.370263][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   50.379187][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   50.387394][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   50.395662][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   50.411987][ T5426] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   50.422397][ T5426] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   50.445832][ T5424] device veth0_vlan entered promiscuous mode
[   50.458332][ T5424] device veth1_vlan entered promiscuous mode
[   50.467130][ T5430] 8021q: adding VLAN 0 to HW filter on device batadv0
[   50.474483][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   50.482193][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   50.490239][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   50.497888][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   50.506645][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   50.514985][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   50.523261][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   50.531912][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   50.540026][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   50.547358][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   50.554986][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   50.563183][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   50.571284][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   50.579423][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   50.587448][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   50.596559][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   50.605397][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   50.613150][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   50.621025][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   50.629142][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   50.637721][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   50.645910][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   50.653558][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   50.660990][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   50.668518][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   50.681325][ T5428] 8021q: adding VLAN 0 to HW filter on device batadv0
[   50.696477][ T5438] device veth0_vlan entered promiscuous mode
[   50.703755][ T5435] 8021q: adding VLAN 0 to HW filter on device bond0
[   50.714912][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   50.718841][ T5456] Bluetooth: hci0: command 0x041b tx timeout
[   50.724636][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   50.734915][ T5456] Bluetooth: hci6: command 0x041b tx timeout
[   50.739139][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   50.744751][ T5456] Bluetooth: hci2: command 0x041b tx timeout
[   50.757440][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   50.762750][ T5456] Bluetooth: hci4: command 0x041b tx timeout
[   50.766782][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   50.772353][ T5456] Bluetooth: hci1: command 0x041b tx timeout
[   50.780345][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   50.785514][ T5456] Bluetooth: hci3: command 0x041b tx timeout
[   50.795833][ T5438] device veth1_vlan entered promiscuous mode
[   50.799061][ T5456] Bluetooth: hci5: command 0x041b tx timeout
[   50.821915][ T5424] device veth0_macvtap entered promiscuous mode
[   50.822000][ T5456] Bluetooth: hci7: command 0x041b tx timeout
[   50.834138][ T5435] 8021q: adding VLAN 0 to HW filter on device team0
[   50.848328][ T5425] 8021q: adding VLAN 0 to HW filter on device batadv0
[   50.856130][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   50.864336][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   50.872206][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   50.879928][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   50.887691][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   50.895869][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   50.904262][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   50.912920][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   50.920380][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   50.928098][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   50.935632][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   50.949341][ T5438] device veth0_macvtap entered promiscuous mode
[   50.957474][ T5424] device veth1_macvtap entered promiscuous mode
[   50.965645][ T5426] 8021q: adding VLAN 0 to HW filter on device batadv0
[   50.984895][ T5438] device veth1_macvtap entered promiscuous mode
[   50.991642][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   50.999811][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   51.007409][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   51.016035][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   51.024397][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   51.032122][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   51.040509][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   51.049421][ T5497] bridge0: port 1(bridge_slave_0) entered blocking state
[   51.056542][ T5497] bridge0: port 1(bridge_slave_0) entered forwarding state
[   51.064355][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   51.072692][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   51.080957][ T5497] bridge0: port 2(bridge_slave_1) entered blocking state
[   51.088008][ T5497] bridge0: port 2(bridge_slave_1) entered forwarding state
[   51.095722][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   51.106151][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   51.114501][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   51.123327][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   51.131185][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   51.146039][ T5428] device veth0_vlan entered promiscuous mode
[   51.155892][ T5424] batman_adv: batadv0: Interface activated: batadv_slave_0
[   51.176561][ T5434] 8021q: adding VLAN 0 to HW filter on device bond0
[   51.187276][ T5438] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   51.198140][ T5438] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.209360][ T5438] batman_adv: batadv0: Interface activated: batadv_slave_0
[   51.216846][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   51.225707][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   51.234831][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   51.243178][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   51.251209][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   51.260020][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   51.268389][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   51.276869][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   51.285256][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   51.293891][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   51.301554][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   51.316891][ T5435] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   51.327326][ T5435] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   51.339479][ T5424] batman_adv: batadv0: Interface activated: batadv_slave_1
[   51.351449][ T5426] device veth0_vlan entered promiscuous mode
[   51.360856][ T5434] 8021q: adding VLAN 0 to HW filter on device team0
[   51.374318][ T5438] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   51.388953][ T5438] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.401359][ T5438] batman_adv: batadv0: Interface activated: batadv_slave_1
[   51.409695][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   51.417928][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   51.426728][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   51.435644][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   51.444176][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   51.452526][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   51.460851][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   51.469205][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   51.477260][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   51.485897][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   51.494169][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   51.502407][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   51.510641][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   51.519106][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   51.527433][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   51.535587][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   51.543772][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   51.551471][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   51.559474][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   51.567937][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   51.576220][ T5497] bridge0: port 1(bridge_slave_0) entered blocking state
[   51.583530][ T5497] bridge0: port 1(bridge_slave_0) entered forwarding state
[   51.591752][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   51.600419][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   51.610784][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   51.618476][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   51.626215][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   51.633946][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   51.641939][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   51.650618][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   51.659062][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   51.673350][ T5426] device veth1_vlan entered promiscuous mode
[   51.684630][ T5428] device veth1_vlan entered promiscuous mode
[   51.691637][ T5430] device veth0_vlan entered promiscuous mode
[   51.700013][ T5438] netdevsim netdevsim0 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   51.709000][ T5438] netdevsim netdevsim0 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   51.718105][ T5438] netdevsim netdevsim0 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   51.727795][ T5438] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   51.738583][ T5424] netdevsim netdevsim1 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   51.747629][ T5424] netdevsim netdevsim1 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   51.756969][ T5424] netdevsim netdevsim1 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   51.765885][ T5424] netdevsim netdevsim1 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   51.776584][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   51.784990][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   51.793070][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   51.801449][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   51.809864][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   51.818479][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   51.827161][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   51.835474][ T5456] bridge0: port 2(bridge_slave_1) entered blocking state
[   51.842631][ T5456] bridge0: port 2(bridge_slave_1) entered forwarding state
[   51.855191][ T5425] device veth0_vlan entered promiscuous mode
[   51.881747][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   51.889884][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   51.898304][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   51.907302][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   51.915717][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   51.924318][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   51.933293][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   51.941633][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   51.950503][ T5456] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   51.960623][ T5426] device veth0_macvtap entered promiscuous mode
[   51.969490][ T5425] device veth1_vlan entered promiscuous mode
[   51.984112][ T5435] 8021q: adding VLAN 0 to HW filter on device batadv0
[   51.994006][ T5500] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   52.002269][ T5500] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   52.010195][ T5500] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   52.018076][ T5500] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   52.026064][ T5500] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   52.033900][ T5500] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   52.042255][ T5500] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   52.050664][ T5500] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   52.058019][ T5500] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   52.065505][ T5500] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   52.073662][ T5500] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   52.081963][ T5500] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   52.090134][ T5500] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   52.099136][ T5430] device veth1_vlan entered promiscuous mode
[   52.108611][ T5426] device veth1_macvtap entered promiscuous mode
[   52.118554][ T5434] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   52.142934][ T5426] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.153967][ T5426] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.163974][ T5426] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.174938][ T5426] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.185607][ T5426] batman_adv: batadv0: Interface activated: batadv_slave_0
[   52.196640][ T5500] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   52.204712][ T5500] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   52.212863][ T5500] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   52.221876][ T5500] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   52.230079][ T5500] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   52.238518][ T5500] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   52.247064][ T5500] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   52.256026][ T5500] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   52.264711][ T5500] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   52.273256][ T5500] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   52.296248][ T5430] device veth0_macvtap entered promiscuous mode
[   52.304325][    T8] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   52.305228][ T5425] device veth0_macvtap entered promiscuous mode
[   52.312767][    T8] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   52.331316][ T5428] device veth0_macvtap entered promiscuous mode
[   52.340351][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   52.348532][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   52.356810][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   52.365434][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   52.374264][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   52.382595][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   52.390965][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   52.399487][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   52.407833][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   52.415841][ T5552] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   52.423594][ T5552] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   52.431472][ T5552] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   52.440949][ T5435] device veth0_vlan entered promiscuous mode
[   52.449461][ T5425] device veth1_macvtap entered promiscuous mode
[   52.465597][   T24] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   52.471179][ T5426] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   52.474529][    T8] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   52.493583][   T24] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   52.496524][    T8] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   52.501483][ T5426] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.518966][ T5426] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   52.529709][ T5426] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.540768][ T5426] batman_adv: batadv0: Interface activated: batadv_slave_1
[   52.549803][ T5428] device veth1_macvtap entered promiscuous mode
[   52.559740][ T5430] device veth1_macvtap entered promiscuous mode
[   52.571276][ T5430] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.582008][ T5430] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.592276][ T5430] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.602911][ T5430] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.612801][ T5430] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.623240][ T5430] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.633741][ T5430] batman_adv: batadv0: Interface activated: batadv_slave_0
[   52.647184][ T5425] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.657924][ T5425] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.667872][ T5425] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.678441][ T5425] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.688596][ T5425] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.699290][ T5425] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.709450][ T5425] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.720522][ T5425] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.731293][ T5425] batman_adv: batadv0: Interface activated: batadv_slave_0
[   52.739688][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   52.749121][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   52.756845][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   52.764991][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   52.773986][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   52.782593][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   52.791063][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   52.798851][ T5500] Bluetooth: hci1: command 0x040f tx timeout
[   52.799692][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   52.806301][ T5500] Bluetooth: hci4: command 0x040f tx timeout
[   52.814376][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   52.823376][ T5500] Bluetooth: hci2: command 0x040f tx timeout
[   52.833207][ T5426] netdevsim netdevsim2 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   52.837257][ T5500] Bluetooth: hci6: command 0x040f tx timeout
[   52.847493][ T5426] netdevsim netdevsim2 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   52.852263][ T5500] Bluetooth: hci0: command 0x040f tx timeout
[   52.860813][ T5426] netdevsim netdevsim2 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   52.875417][ T5426] netdevsim netdevsim2 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   52.884494][ T5500] Bluetooth: hci7: command 0x040f tx timeout
[   52.890813][ T5500] Bluetooth: hci5: command 0x040f tx timeout
[   52.893820][ T5428] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.897075][ T5500] Bluetooth: hci3: command 0x040f tx timeout
[   52.908818][ T5428] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.924254][ T5428] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.935325][ T5428] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.945152][ T5428] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.956180][ T5428] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.967040][ T5428] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.977865][ T5428] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.987974][ T5428] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.998540][ T5428] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.009149][ T5428] batman_adv: batadv0: Interface activated: batadv_slave_0
[   53.017984][ T5435] device veth1_vlan entered promiscuous mode
[   53.025828][ T5430] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.025906][  T643] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   53.036755][ T5430] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.045230][  T643] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   53.055130][ T5430] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.073233][ T5430] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.083050][ T5430] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.093550][ T5430] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.104061][ T5430] batman_adv: batadv0: Interface activated: batadv_slave_1
[   53.113499][ T5425] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.124432][ T5425] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.134662][ T5425] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.145691][ T5425] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.155605][ T5425] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.166069][ T5425] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.176558][ T5425] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.187213][ T5425] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.202491][ T5425] batman_adv: batadv0: Interface activated: batadv_slave_1
[   53.214837][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   53.233726][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   53.242581][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   53.251275][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   53.258869][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   53.266476][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   53.274652][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   53.283448][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   53.292204][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   53.300726][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   53.311175][ T5434] 8021q: adding VLAN 0 to HW filter on device batadv0
[   53.321187][ T5430] netdevsim netdevsim7 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   53.330269][ T5430] netdevsim netdevsim7 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   53.339384][ T5430] netdevsim netdevsim7 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   53.348128][ T5430] netdevsim netdevsim7 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   53.359660][ T5425] netdevsim netdevsim5 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   53.368550][ T5425] netdevsim netdevsim5 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   53.377689][ T5425] netdevsim netdevsim5 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   53.386990][ T5425] netdevsim netdevsim5 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   53.396485][ T5428] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.407685][ T5428] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.418193][ T5428] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.429359][ T5428] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.439723][ T5428] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.450847][ T5428] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.460854][ T3264] usb 1-1: new high-speed USB device number 2 using dummy_hcd
[   53.468762][ T5428] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.479520][ T5428] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.489592][ T5428] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.500428][ T5428] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.511158][ T5428] batman_adv: batadv0: Interface activated: batadv_slave_1
[   53.526000][ T5435] device veth0_macvtap entered promiscuous mode
[   53.551727][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   53.569096][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   53.577927][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   53.586514][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   53.595097][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   53.613499][ T5435] device veth1_macvtap entered promiscuous mode
[   53.630271][ T5428] netdevsim netdevsim6 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   53.639481][ T5428] netdevsim netdevsim6 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   53.648285][ T5428] netdevsim netdevsim6 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   53.657421][ T5428] netdevsim netdevsim6 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   53.672336][   T24] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   53.676725][ T5435] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.687094][   T24] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   53.691653][ T5435] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.708322][ T5435] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.719166][ T3264] usb 1-1: Using ep0 maxpacket: 8
[   53.719821][ T5435] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.735861][ T5435] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.747052][ T5435] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.757437][ T5435] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.769191][ T5435] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.779875][ T5435] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.790874][ T5435] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.801080][ T5435] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.812413][ T5435] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.818709][ T5565] usb 2-1: new high-speed USB device number 2 using dummy_hcd
[   53.822978][ T5435] batman_adv: batadv0: Interface activated: batadv_slave_0
[   53.849124][ T3264] usb 1-1: config 0 interface 0 altsetting 0 endpoint 0x9 has invalid wMaxPacketSize 0
[   53.859407][ T3264] usb 1-1: config 0 interface 0 altsetting 0 bulk endpoint 0x9 has invalid maxpacket 0
[   53.870031][ T3264] usb 1-1: config 0 interface 0 altsetting 0 endpoint 0x82 has invalid wMaxPacketSize 0
[   53.880698][ T3264] usb 1-1: config 0 interface 0 altsetting 0 bulk endpoint 0x82 has invalid maxpacket 0
[   53.886077][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   53.890503][  T643] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   53.904772][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   53.906482][ T3264] usb 1-1: New USB device found, idVendor=1286, idProduct=2046, bcdDevice=ee.71
[   53.913998][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   53.923100][  T643] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   53.931107][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   53.938110][ T3264] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   53.946975][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   53.963588][ T3264] usb 1-1: config 0 descriptor??
[   53.968003][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   53.977710][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   53.986527][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   53.994825][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   53.999638][ T3264] usb 1-1: NFC: intf 00000000ee389d2d id 00000000f6f50896
[   54.004069][ T5435] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   54.010789][ T3264] nfcmrvl 1-1:0.0: NFC: registered with nci successfully
[   54.024098][ T5435] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.046424][ T5435] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   54.057961][ T5435] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.068285][ T5435] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   54.078867][ T5565] usb 2-1: Using ep0 maxpacket: 8
[   54.079301][ T5435] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.093881][ T5435] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   54.104945][ T5435] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.115108][ T5435] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   54.126824][ T5435] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.138252][ T5435] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   54.149485][ T5435] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.160350][ T5435] batman_adv: batadv0: Interface activated: batadv_slave_1
[   54.171406][ T5435] netdevsim netdevsim3 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   54.180203][ T5435] netdevsim netdevsim3 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   54.189665][ T5435] netdevsim netdevsim3 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   54.199016][ T5435] netdevsim netdevsim3 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   54.209435][ T5565] usb 2-1: config 0 interface 0 altsetting 0 endpoint 0x9 has invalid wMaxPacketSize 0
[   54.222331][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   54.222590][   T36] usb 1-1: USB disconnect, device number 2
[   54.230800][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   54.236445][   T36] usb 1-1: NFC: intf 00000000ee389d2d
[   54.244351][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   54.248548][ T5565] usb 2-1: config 0 interface 0 altsetting 0 bulk endpoint 0x9 has invalid maxpacket 0
[   54.257401][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   54.270292][ T5565] usb 2-1: config 0 interface 0 altsetting 0 endpoint 0x82 has invalid wMaxPacketSize 0
[   54.275701][ T5434] device veth0_vlan entered promiscuous mode
[   54.292665][ T5565] usb 2-1: config 0 interface 0 altsetting 0 bulk endpoint 0x82 has invalid maxpacket 0
[   54.302746][ T5565] usb 2-1: New USB device found, idVendor=1286, idProduct=2046, bcdDevice=ee.71
[   54.312132][ T5565] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   54.321181][  T643] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.331646][  T643] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.338947][ T5565] usb 2-1: config 0 descriptor??
[   54.344017][ T5434] device veth1_vlan entered promiscuous mode
[   54.354735][ T5500] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   54.377305][    T8] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.385435][ T5565] usb 2-1: NFC: intf 00000000919e4541 id 00000000f6f50896
[   54.403432][    T8] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.419061][  T643] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.432005][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   54.433622][  T643] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.448643][ T5565] nfcmrvl 2-1:0.0: NFC: registered with nci successfully
[   54.450354][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   54.469583][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   54.480597][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   54.489919][ T5434] device veth0_macvtap entered promiscuous mode
[   54.497009][ T5505] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   54.508749][  T643] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.522302][  T643] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.537705][ T5434] device veth1_macvtap entered promiscuous mode
[   54.567911][   T27] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.573305][  T643] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.575809][ T5552] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   54.591812][  T643] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.594181][   T27] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.600250][ T5504] usb 2-1: USB disconnect, device number 2
[   54.606835][ T5552] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   54.617150][ T5504] usb 2-1: NFC: intf 00000000919e4541
[   54.620197][ T5552] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   54.634359][ T5552] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   54.648705][    T8] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.656522][    T8] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.664150][ T3076] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.664885][ T5434] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
2024/04/16 16:19:33 executed programs: 8
[   54.677714][ T3076] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.690622][ T5500] usb 6-1: new high-speed USB device number 2 using dummy_hcd
[   54.702838][ T5434] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.716248][ T5434] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   54.732150][ T5434] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.743490][ T5434] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   54.755383][ T5434] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.765486][ T5434] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   54.776178][ T5434] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.787007][ T5434] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   54.797629][ T5434] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.808159][ T5434] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   54.818720][ T5503] usb 3-1: new high-speed USB device number 2 using dummy_hcd
[   54.835746][ T5434] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.846075][ T5434] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   54.856792][ T5434] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.867281][ T5434] batman_adv: batadv0: Interface activated: batadv_slave_0
[   54.875780][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   54.884477][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   54.892424][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   54.901126][   T36] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   54.909850][   T36] Bluetooth: hci0: command 0x0419 tx timeout
[   54.915396][ T5434] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   54.916454][   T36] Bluetooth: hci6: command 0x0419 tx timeout
[   54.927809][ T5434] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.934935][ T5500] usb 6-1: Using ep0 maxpacket: 8
[   54.945825][ T5434] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   54.956327][   T36] Bluetooth: hci2: command 0x0419 tx timeout
[   54.967661][ T5434] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.978891][ T3264] usb 8-1: new high-speed USB device number 2 using dummy_hcd
[   54.980603][ T5434] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   54.992155][   T36] Bluetooth: hci4: command 0x0419 tx timeout
[   54.997098][ T5434] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.013504][ T5434] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   55.015954][   T36] Bluetooth: hci1: command 0x0419 tx timeout
[   55.024977][ T5434] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.031252][ T5565] usb 7-1: new high-speed USB device number 2 using dummy_hcd
[   55.042150][ T5496] usb 1-1: new high-speed USB device number 3 using dummy_hcd
[   55.066093][ T5434] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   55.071808][   T19] Bluetooth: hci3: command 0x0419 tx timeout
[   55.077706][ T5434] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.083111][   T19] Bluetooth: hci5: command 0x0419 tx timeout
[   55.092705][ T5434] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   55.099082][ T5500] usb 6-1: config 0 interface 0 altsetting 0 endpoint 0x9 has invalid wMaxPacketSize 0
[   55.110232][ T5434] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.118836][ T5503] usb 3-1: Using ep0 maxpacket: 8
[   55.136873][ T5434] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   55.148066][ T5434] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.151327][ T5500] usb 6-1: config 0 interface 0 altsetting 0 bulk endpoint 0x9 has invalid maxpacket 0
[   55.159098][ T5434] batman_adv: batadv0: Interface activated: batadv_slave_1
[   55.176263][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   55.185765][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   55.189668][ T5500] usb 6-1: config 0 interface 0 altsetting 0 endpoint 0x82 has invalid wMaxPacketSize 0
[   55.196733][ T5434] netdevsim netdevsim4 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   55.214171][ T5434] netdevsim netdevsim4 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   55.214819][ T5500] usb 6-1: config 0 interface 0 altsetting 0 bulk endpoint 0x82 has invalid maxpacket 0
[   55.224343][ T5434] netdevsim netdevsim4 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   55.233751][ T5500] usb 6-1: New USB device found, idVendor=1286, idProduct=2046, bcdDevice=ee.71
[   55.242394][ T5434] netdevsim netdevsim4 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   55.252618][ T5500] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   55.269385][ T3264] usb 8-1: Using ep0 maxpacket: 8
[   55.275001][ T5552] Bluetooth: hci7: command 0x0419 tx timeout
[   55.288888][ T5503] usb 3-1: config 0 interface 0 altsetting 0 endpoint 0x9 has invalid wMaxPacketSize 0
[   55.298759][ T5500] usb 6-1: config 0 descriptor??
[   55.304016][ T5503] usb 3-1: config 0 interface 0 altsetting 0 bulk endpoint 0x9 has invalid maxpacket 0
[   55.314060][ T5503] usb 3-1: config 0 interface 0 altsetting 0 endpoint 0x82 has invalid wMaxPacketSize 0
[   55.324098][ T5503] usb 3-1: config 0 interface 0 altsetting 0 bulk endpoint 0x82 has invalid maxpacket 0
[   55.325640][  T643] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   55.334220][ T5503] usb 3-1: New USB device found, idVendor=1286, idProduct=2046, bcdDevice=ee.71
[   55.343239][ T5496] usb 1-1: Using ep0 maxpacket: 8
[   55.351761][ T5500] usb 6-1: NFC: intf 00000000faf6606b id 00000000f6f50896
[   55.364402][ T5565] usb 7-1: Using ep0 maxpacket: 8
[   55.373061][ T5503] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   55.383615][ T5503] usb 3-1: config 0 descriptor??
[   55.387626][  T643] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   55.398237][   T27] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   55.398935][ T3264] usb 8-1: config 0 interface 0 altsetting 0 endpoint 0x9 has invalid wMaxPacketSize 0
[   55.407293][   T27] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   55.417772][ T3264] usb 8-1: config 0 interface 0 altsetting 0 bulk endpoint 0x9 has invalid maxpacket 0
[   55.428401][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   55.434122][ T5503] usb 3-1: NFC: intf 00000000a337e621 id 00000000f6f50896
[   55.445006][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   55.450493][ T5500] nfcmrvl 6-1:0.0: NFC: registered with nci successfully
[   55.465508][ T3264] usb 8-1: config 0 interface 0 altsetting 0 endpoint 0x82 has invalid wMaxPacketSize 0
[   55.476269][ T3264] usb 8-1: config 0 interface 0 altsetting 0 bulk endpoint 0x82 has invalid maxpacket 0
[   55.486471][ T3264] usb 8-1: New USB device found, idVendor=1286, idProduct=2046, bcdDevice=ee.71
[   55.498758][ T5565] usb 7-1: config 0 interface 0 altsetting 0 endpoint 0x9 has invalid wMaxPacketSize 0
[   55.499073][ T5496] usb 1-1: config 0 interface 0 altsetting 0 endpoint 0x9 has invalid wMaxPacketSize 0
[   55.508493][ T5565] usb 7-1: config 0 interface 0 altsetting 0 bulk endpoint 0x9 has invalid maxpacket 0
[   55.508517][ T5565] usb 7-1: config 0 interface 0 altsetting 0 endpoint 0x82 has invalid wMaxPacketSize 0
[   55.540051][ T5496] usb 1-1: config 0 interface 0 altsetting 0 bulk endpoint 0x9 has invalid maxpacket 0
[   55.555046][ T3264] usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   55.570329][ T5496] usb 1-1: config 0 interface 0 altsetting 0 endpoint 0x82 has invalid wMaxPacketSize 0
[   55.571685][ T5503] nfcmrvl 3-1:0.0: NFC: registered with nci successfully
[   55.589529][ T3264] usb 8-1: config 0 descriptor??
[   55.592227][ T5496] usb 1-1: config 0 interface 0 altsetting 0 bulk endpoint 0x82 has invalid maxpacket 0
[   55.597459][ T5565] usb 7-1: config 0 interface 0 altsetting 0 bulk endpoint 0x82 has invalid maxpacket 0
[   55.618134][ T5565] usb 7-1: New USB device found, idVendor=1286, idProduct=2046, bcdDevice=ee.71
[   55.622828][ T5496] usb 1-1: New USB device found, idVendor=1286, idProduct=2046, bcdDevice=ee.71
[   55.627565][ T5565] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   55.636914][ T5496] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   55.645240][ T3264] usb 8-1: NFC: intf 00000000a52caafc id 00000000f6f50896
[   55.660997][ T5496] usb 1-1: config 0 descriptor??
[   55.669877][ T5456] usb 3-1: USB disconnect, device number 2
[   55.675951][ T5552] usb 6-1: USB disconnect, device number 2
[   55.683397][ T5565] usb 7-1: config 0 descriptor??
[   55.688583][ T5456] usb 3-1: NFC: intf 00000000a337e621
[   55.694766][ T5552] usb 6-1: NFC: intf 00000000faf6606b
[   55.701288][ T3264] nfcmrvl 8-1:0.0: NFC: registered with nci successfully
[   55.728906][ T5496] usb 1-1: NFC: intf 0000000057abd13c id 00000000f6f50896
[   55.739157][ T5565] usb 7-1: NFC: intf 00000000edba7629 id 00000000f6f50896
[   55.759414][ T5565] nfcmrvl 7-1:0.0: NFC: registered with nci successfully
[   55.779052][ T5496] nfcmrvl 1-1:0.0: NFC: registered with nci successfully
[   55.828744][   T36] usb 4-1: new high-speed USB device number 2 using dummy_hcd
[   55.836320][ T5503] usb 2-1: new high-speed USB device number 3 using dummy_hcd
[   55.845357][ T5565] usb 8-1: USB disconnect, device number 2
[   55.851760][ T5565] usb 8-1: NFC: intf 00000000a52caafc
[   55.930544][ T5552] usb 1-1: USB disconnect, device number 3
[   55.936522][ T5552] usb 1-1: NFC: intf 0000000057abd13c
[   55.942259][ T5456] usb 7-1: USB disconnect, device number 2
[   55.948477][ T5456] usb 7-1: NFC: intf 00000000edba7629
[   55.989011][ T5497] usb 5-1: new high-speed USB device number 2 using dummy_hcd
[   56.068757][   T36] usb 4-1: Using ep0 maxpacket: 8
[   56.079430][ T5503] usb 2-1: Using ep0 maxpacket: 8
[   56.188853][   T36] usb 4-1: config 0 interface 0 altsetting 0 endpoint 0x9 has invalid wMaxPacketSize 0
[   56.198603][   T36] usb 4-1: config 0 interface 0 altsetting 0 bulk endpoint 0x9 has invalid maxpacket 0
[   56.208585][ T5503] usb 2-1: config 0 interface 0 altsetting 0 endpoint 0x9 has invalid wMaxPacketSize 0
[   56.218438][ T5503] usb 2-1: config 0 interface 0 altsetting 0 bulk endpoint 0x9 has invalid maxpacket 0
[   56.228254][ T5503] usb 2-1: config 0 interface 0 altsetting 0 endpoint 0x82 has invalid wMaxPacketSize 0
[   56.238094][   T36] usb 4-1: config 0 interface 0 altsetting 0 endpoint 0x82 has invalid wMaxPacketSize 0
[   56.238689][ T5497] usb 5-1: Using ep0 maxpacket: 8
[   56.248517][ T5503] usb 2-1: config 0 interface 0 altsetting 0 bulk endpoint 0x82 has invalid maxpacket 0
[   56.263267][   T36] usb 4-1: config 0 interface 0 altsetting 0 bulk endpoint 0x82 has invalid maxpacket 0
[   56.273909][   T36] usb 4-1: New USB device found, idVendor=1286, idProduct=2046, bcdDevice=ee.71
[   56.283533][ T5503] usb 2-1: New USB device found, idVendor=1286, idProduct=2046, bcdDevice=ee.71
[   56.292757][   T36] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   56.300790][ T5503] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   56.309606][   T36] usb 4-1: config 0 descriptor??
[   56.317709][ T5503] usb 2-1: config 0 descriptor??
[   56.349462][   T36] usb 4-1: NFC: intf 00000000dae5bfbb id 00000000f6f50896
[   56.361502][ T5503] usb 2-1: NFC: intf 0000000037ab96c1 id 00000000f6f50896
[   56.370562][ T5497] usb 5-1: config 0 interface 0 altsetting 0 endpoint 0x9 has invalid wMaxPacketSize 0
[   56.381135][ T5497] usb 5-1: config 0 interface 0 altsetting 0 bulk endpoint 0x9 has invalid maxpacket 0
[   56.391606][ T5497] usb 5-1: config 0 interface 0 altsetting 0 endpoint 0x82 has invalid wMaxPacketSize 0
[   56.392904][ T5503] nfcmrvl 2-1:0.0: NFC: registered with nci successfully
[   56.411503][ T5497] usb 5-1: config 0 interface 0 altsetting 0 bulk endpoint 0x82 has invalid maxpacket 0
[   56.419090][   T36] nfcmrvl 4-1:0.0: NFC: registered with nci successfully
[   56.445677][ T5497] usb 5-1: New USB device found, idVendor=1286, idProduct=2046, bcdDevice=ee.71
[   56.462075][ T5497] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   56.473344][ T5497] usb 5-1: config 0 descriptor??
[   56.479041][ T5565] usb 6-1: new high-speed USB device number 3 using dummy_hcd
[   56.519002][ T5497] usb 5-1: NFC: intf 00000000afc4f0ae id 00000000f6f50896
[   56.536192][ T5497] nfcmrvl 5-1:0.0: NFC: registered with nci successfully
[   56.549477][ T5503] usb 4-1: USB disconnect, device number 2
[   56.555660][ T5503] usb 4-1: NFC: intf 00000000dae5bfbb
[   56.562848][ T5552] usb 2-1: USB disconnect, device number 3
[   56.571033][ T5552] usb 2-1: NFC: intf 0000000037ab96c1
[   56.718845][ T5565] usb 6-1: Using ep0 maxpacket: 8
[   56.721414][    T5] usb 5-1: USB disconnect, device number 2
[   56.730184][    T5] usb 5-1: NFC: intf 00000000afc4f0ae
[   56.838883][ T5565] usb 6-1: config 0 interface 0 altsetting 0 endpoint 0x9 has invalid wMaxPacketSize 0
[   56.849565][ T5565] usb 6-1: config 0 interface 0 altsetting 0 bulk endpoint 0x9 has invalid maxpacket 0
[   56.860059][ T5565] usb 6-1: config 0 interface 0 altsetting 0 endpoint 0x82 has invalid wMaxPacketSize 0
[   56.870151][ T5565] usb 6-1: config 0 interface 0 altsetting 0 bulk endpoint 0x82 has invalid maxpacket 0
[   56.880317][ T5565] usb 6-1: New USB device found, idVendor=1286, idProduct=2046, bcdDevice=ee.71
[   56.891146][ T5565] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   56.901711][ T5565] usb 6-1: config 0 descriptor??
[   56.939016][ T5565] usb 6-1: NFC: intf 000000008a6cd54f id 00000000f6f50896
[   56.947410][ T5565] nfcmrvl 6-1:0.0: NFC: registered with nci successfully
[   57.139145][   T19] usb 6-1: USB disconnect, device number 3
[   57.146429][   T19] usb 6-1: NFC: intf 000000008a6cd54f
[   63.475976][ T5644] kmemleak: 9 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
BUG: memory leak
unreferenced object 0xffff8881238c0800 (size 1024):
  comm "kworker/1:8", pid 5565, jiffies 4294942705 (age 11.650s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 10 2b 23 81 88 ff ff  ..........+#....
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000d2e02cd8>] nci_hci_allocate+0x20/0xb0
    [<00000000dd7714a6>] nci_allocate_device+0x111/0x160
    [<00000000ec322d8d>] nfcmrvl_nci_register_dev+0x108/0x1c0
    [<000000008f8c15ac>] nfcmrvl_probe+0x212/0x27f
    [<000000001185cc12>] usb_probe_interface+0x167/0x350
    [<0000000010eb6229>] really_probe+0x154/0x500
    [<0000000063ed14ad>] driver_probe_device+0x8c/0x100
    [<00000000749981cf>] __device_attach_driver+0xf3/0x130
    [<000000000a67e4bc>] bus_for_each_drv+0xb1/0xf0
    [<000000008aa1e222>] __device_attach+0xed/0x250
    [<00000000bc0c0f22>] bus_probe_device+0xc6/0xe0
    [<000000004a2b1b65>] device_add+0x566/0xd90
    [<00000000af541f3b>] usb_set_configuration+0x814/0xb50
    [<00000000a24056ff>] usb_generic_driver_probe+0x86/0xc0
    [<0000000037bcd10d>] usb_probe_device+0x5c/0x150
    [<0000000010eb6229>] really_probe+0x154/0x500

BUG: memory leak
unreferenced object 0xffff888123b37800 (size 1024):
  comm "kworker/1:4", pid 5500, jiffies 4294942801 (age 10.690s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 b8 40 20 81 88 ff ff  ..........@ ....
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000d2e02cd8>] nci_hci_allocate+0x20/0xb0
    [<00000000dd7714a6>] nci_allocate_device+0x111/0x160
    [<00000000ec322d8d>] nfcmrvl_nci_register_dev+0x108/0x1c0
    [<000000008f8c15ac>] nfcmrvl_probe+0x212/0x27f
    [<000000001185cc12>] usb_probe_interface+0x167/0x350
    [<0000000010eb6229>] really_probe+0x154/0x500
    [<0000000063ed14ad>] driver_probe_device+0x8c/0x100
    [<00000000749981cf>] __device_attach_driver+0xf3/0x130
    [<000000000a67e4bc>] bus_for_each_drv+0xb1/0xf0
    [<000000008aa1e222>] __device_attach+0xed/0x250
    [<00000000bc0c0f22>] bus_probe_device+0xc6/0xe0
    [<000000004a2b1b65>] device_add+0x566/0xd90
    [<00000000af541f3b>] usb_set_configuration+0x814/0xb50
    [<00000000a24056ff>] usb_generic_driver_probe+0x86/0xc0
    [<0000000037bcd10d>] usb_probe_device+0x5c/0x150
    [<0000000010eb6229>] really_probe+0x154/0x500

BUG: memory leak
unreferenced object 0xffff8881246d2800 (size 1024):
  comm "kworker/1:6", pid 5503, jiffies 4294942811 (age 10.590s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 68 36 23 81 88 ff ff  .........h6#....
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000d2e02cd8>] nci_hci_allocate+0x20/0xb0
    [<00000000dd7714a6>] nci_allocate_device+0x111/0x160
    [<00000000ec322d8d>] nfcmrvl_nci_register_dev+0x108/0x1c0
    [<000000008f8c15ac>] nfcmrvl_probe+0x212/0x27f
    [<000000001185cc12>] usb_probe_interface+0x167/0x350
    [<0000000010eb6229>] really_probe+0x154/0x500
    [<0000000063ed14ad>] driver_probe_device+0x8c/0x100
    [<00000000749981cf>] __device_attach_driver+0xf3/0x130
    [<000000000a67e4bc>] bus_for_each_drv+0xb1/0xf0
    [<000000008aa1e222>] __device_attach+0xed/0x250
    [<00000000bc0c0f22>] bus_probe_device+0xc6/0xe0
    [<000000004a2b1b65>] device_add+0x566/0xd90
    [<00000000af541f3b>] usb_set_configuration+0x814/0xb50
    [<00000000a24056ff>] usb_generic_driver_probe+0x86/0xc0
    [<0000000037bcd10d>] usb_probe_device+0x5c/0x150
    [<0000000010eb6229>] really_probe+0x154/0x500

